Укр|Eng|Рус
Ukraine
Catalog   /   Photo   /   Photo Accessories   /   Battery Chargers

Comparison Technoline BC 1000 + 4xAA 2700 mAh vs La Crosse BC-1000

Add to comparison
Technoline BC 1000 + 4xAA 2700 mAh
La Crosse BC-1000
Technoline BC 1000 + 4xAA 2700 mAhLa Crosse BC-1000
Compare prices 9
from 465 ₴
Outdated Product
TOP sellers
Batteries charging
Charging slots4 шт4 шт
Supported types
Ni-Cd
Ni-Mh
Ni-Cd
Ni-Mh
Size
AAA
AA
AAA
AA
Specs
Operation indicatordisplaydisplay
Independent charge channels4 шт4 шт
Min. charge current200 mA200 mA
Max. charge current1800 mA
1800 mA /for 2 channels/
Charge current (all channels)1000 mA1000 mA
Number of settings
6 pcs /200/500/700/1000/1500/1800mA/
6 pcs
Drip charge
Min. discharge current100 mA
Max. discharge current500 mA
Features
Capacity measurement
Overcharge protection
Preliminary discharge
Capacity recovery
Residual capacity check
Polarity test
Fault detection
Overheat protection
Short circuit protection
General
In box
4xAA 2700 mAh
battery adapters /4 для С, 4 для D/
storage bag
4xAA 2600 mAh, 4xAAA 1000 mAh
battery adapters /4xC and 4xD/
storage bag
Mains plug on cable
Dimensions (HxWxD)37x129x75 mm129x75x37.2 mm
Added to E-Catalognovember 2017april 2016

Min. discharge current

The smallest current that the device is capable of providing in battery discharge mode.

Some specific functions are based on the discharge of the battery installed in the charger (see below for more details); in this case, it often becomes necessary to set a certain value of current strength, which is optimal for a given battery. The lower the minimum discharge current (with the same maximum) — the wider the adjustment range and the higher the probability that the device will be able to provide the optimal discharge mode.

Max. discharge current

The highest current that the device can provide in battery discharge mode.

Some specific functions are based on the discharge of the battery installed in the charger (see below for more details). The higher the maximum value of the discharge current, the less time it takes to “drain” energy from the battery. On the other hand, for some types of batteries and discharge modes, specific current recommendations may be provided, and exceeding them can be fraught with overload, overheating, and even fire. Therefore, it is necessary to specifically pursue high values of the discharge current only if it is justified from a technical point of view.

Polarity test

A system that determines the location of the "plus" and "minus" of the connected battery and determines whether these contacts correspond to the contacts of the charger itself. The capabilities of such systems may be different: some, in the event of an error, issue a warning signal and block the power supply, others are able to automatically switch the polarity on the contacts, depending on which side the battery is installed. In any case, checking the polarity minimizes the possibility of connection errors and the corresponding consequences.

Short circuit protection

Short circuit protection function . Such a short circuit can occur both during charging (for example, due to a malfunction of the connected battery or a foreign object getting between the contacts), and during discharging (due to a failure already in the memory itself). In any case, a short circuit leads to a sharp increase in current strength and abnormal loads on equipment, the consequences of which can be breakdowns and fires. To avoid this, short circuit protection is used - usually in the form of a fuse that turns off the power when the current increases sharply. Note that such a fuse can be both reusable and disposable, requiring replacement after operation.

In box

In addition to the main charger, the package may include batteries, cigarette lighter adapter, adapter to another type of battery and bag (case). More about them:

- Battery. Some modern chargers can be equipped with batteries - of course, the latter are best suited for this model. Buying such a kit is often more convenient than buying a "charger" and batteries separately (at least it's faster).

— Cigarette lighter adapter 12 V. Presence of a charger adapter for connection to a car cigarette lighter socket. For more information about this connection, see "Charging from the cigarette lighter"; here we note that not all models with the possibility of such charging are initially equipped with auto adapters. Therefore, if it is important for you to be able to connect the charger to the cigarette lighter out of the box, you should pay attention to the models in the appropriate configuration.

- Battery adapters. Such adapters allow you to use the charger with batteries of "non-native" sizes (see above), and, as a rule, larger than standard ones. For example, a model for AA and AAA batteries can be equipped with adapters for C or even D. This is more convenient than using a charger that was originally designed for large sizes: the device turns out to be more compact, and if necessary, a large battery i...s connected without problems through an adapter.

- Storage bag. The bag plays the role of a protective cover and can be used not only for storage, but also for transporting the charger. At the same time, it often provides additional compartments for various items - both complete, such as an external power supply, and additional, such as batteries. Therefore, and also because it fits optimally in size, a complete storage bag is much more convenient than impromptu cases.

Mains plug on cable

Chargers with a plug for connecting to a socket on the tip of the mains cable. Models with a plug on the wire provide freedom of placement of the “charger” (especially in cramped free space near the outlet). So that the cable does not get tangled at hand, in many models it is made removable, which makes it easy to store the charger.
Price graph
Technoline BC 1000 + 4xAA 2700 mAh often compared
La Crosse BC-1000 often compared