Storage
The nominal capacity of a memory card is the amount of data that can be written to it. For technical reasons, the real working volume of modern memory cards is usually somewhat less than the nominal one (for example, 14.9 GB with the claimed 16 GB). However, with the same type of card, differences in nominal capacity usually correspond to differences in actual capacity: for example, a 64 GB SDXC card will actually have twice the capacity of a 32 GB card of the same card.
Recall that different types of media have different limits on the maximum volume; see "Type" for details. And a specific volume is most often chosen by the manufacturer not arbitrarily, but from a list of standard options. The most widely used cards nowadays are
16 GB,
32 GB,
64 GB,
128 GB and
256 GB ; capacities of
8 GB or less are considered modest, with the most capacious models holding
512 GB or more.
Note that the price of the card directly depends on this parameter. Thus, many models are available in several variations, differing solely in capacity; and it is worth choosing by volume depending on the types of data that are planned to be stored on the card. Of the popular formats, text documents occupy the least space — usually tens, at
...most hundreds of kilobytes. The size of a photo from a modern camera or an MP3 file is already calculated in megabytes, music in lossless formats "weighs" already tens of megabytes, and the volume of a video depends on its duration, resolution and the codecs used.Read speed
The maximum speed of reading data from a memory card.
Any modern memory card provides sufficient reading speed for simple everyday tasks — like copying photos from a camera to a laptop. Therefore, it makes sense to pay attention to this parameter mainly in cases where the card is purchased for professional use, or if high speed is critical for you — for example, if you often have to copy photos from the camera in a hurry. In doing so, two points should be taken into account. Firstly, the corresponding speed must be supported by the card reader where the card is used. Secondly, this paragraph indicates the theoretical maximum — in perfect conditions; the actual reading speed may be lower (if we are talking about cards with UHS, this speed can be estimated by the UHS class, see above about it). Nevertheless, it is quite possible to compare different models of cards by this indicator: differences in theoretical speed usually quite correspond to the difference in actual speed.
Write speed
The maximum speed for writing data to a memory card.
High write speed is important for tasks that involve storing large amounts of data in a limited amount of time. However, note that this paragraph indicates the theoretical maximum speed for perfect conditions; in fact, this value can be noticeably lower. Therefore, the characteristics of memory cards also indicate the minimum guaranteed write speeds in different modes — the general speed class, the UHS class, the video recording class and/or the class for applications. All of them are described in more detail above. However, you can also evaluate the capabilities of the carrier by the overall speed: other things being equal, a card with a higher theoretical speed will work faster in fact.
As for specific values, speeds
from 4 MB / s and
from 6 MB / s are practically not found nowadays,
from 10 MB / s and from
16 MB / s can be called average indicators,
from 50 MB / s — above average, and the fastest models have a maximum write speed of
100 Mbps or more.
