Comparison Whirlpool ART 6501 A+ vs Whirlpool ART 65021

One of the desirable features in a freezer are big drawers that can accommodate large items such as a whole turkey. However, what one manufacturer considers as a large drawer may differ from another manufacturer's definition. In some cases, a large drawer in one model may be equivalent in size to a standard drawer in another model.

The lowest temperature provided by a refrigerator freezer.

The lower the freezer temperature indicator, the more advanced the freezer is considered to be, and the better it is suited for long-term food storage with wider capabilities. It's important to note that the standard operating temperature for a fully functional freezer is -18 °C, which is suitable for both storing and freezing pre-frozen foods. Some refrigerators are designed with a temperature indicator of -24 °C, but this is mainly achieved through the quick freezing mode (see "Functions"), and the standard operating temperature is still -18 °C. However, if you plan to freeze food frequently and store it for extended periods, it's better to choose a model with a temperature of -24 °C and consider the freezing power as well.

Less expensive refrigerators have a less advanced freezer with a modest minimum temperature of -12°C or even -6°C, which is only suitable for storing pre-frozen foods, not for freezing fresh food. Although they are much more affordable.

To indicate the temperature of the freezer, markings in the form of asterisks (snowflakes) are often used, each of which means a decrease in temperature by 6 °C. For example, the mentioned -18 °C will correspond to 3 asterisks (***).

The freezing capacity of a refrigerator refers to the amount of fresh food it can freeze from room temperature to the freezer temperature within a 24-hour period. For everyday use, a freezing capacity of up to 10 kg/day is sufficient, but if you frequently freeze large volumes of food, you should consider a more powerful freezer.

The energy efficiency of a refrigerator is measured by a parameter classified from A to G, with A being the most efficient. Originally, only up to class A was available until newer, more efficient models were introduced and labeled as A+, A++, and A+++. However, in March 2021, manufacturers reverted to the original labeling system from G to A to avoid creating more pluses. This means that modern models will have the new labeling system, while older ones will maintain their original markings.

The average amount of energy consumed by a refrigerator in a year of operation.

The given parameter is an estimated value and assumes that the refrigerator operates under stable conditions without sudden temperature changes, frequent door openings, and within its designated climate class (see below). Actual energy consumption may deviate slightly from the stated value. Despite this, it is a useful parameter that allows for a rough comparison of different models in terms of energy efficiency.

It should be noted that the energy consumption per year is often a more practical and convenient parameter than the energy consumption class (see above), which is a relative indicator of how efficient a refrigerator is compared to other models of similar size and features. The energy consumption per year, on the other hand, provides an estimate of the actual electricity cost when using a particular refrigerator. For instance, a small two-door refrigerator with an energy class of A can consume less energy per year than a large side-by-side refrigerator with a class of A+++, despite the fact that the latter is formally more energy-efficient than the former in terms of its energy class.

This parameter describes the climate conditions for which a particular refrigerator model is designed. A more powerful cooling system and better thermal insulation are required for the refrigerator to operate efficiently in hot conditions compared to low air temperatures. If the refrigerator is not designed for the specific climate conditions it operates in, it may not function efficiently or may even fail.

— SN (subnormal).Refrigerators of this class are intended for use in temperate climates with relatively low temperatures. They are designed to operate within a temperature range of +10°C to +32°C, which is slightly lower than class N. These refrigerators can be particularly useful in poorly insulated rooms where the temperature can drop below +16°C during the colder seasons.

— N (normal). Models designed for moderate climate, with ambient temperature from +16 °C to +32 °C.

— ST (subtropical). Although named after subtropical climates, these models are suitable for both subtropical and tropical climates with high humidity. They can operate within a temperature range of +18°C ... +38°C.

— T (tropical). Units designed primarily for dry tropical climates. They operate at ambient temperatures from +18 °C to +43 °C.

to the development of refrigerators with combined climate classe...s and enhanced features. These models are characterized by both upper and lower classes, such as N-ST, indicating a wider operating range from the lower limit of the lower class to the upper limit of the upper one. For instance, N-ST corresponds to a temperature range of +16...+38 °C. Some models even combine all four classes, such as SN-T, which has an extended range of +10...+43 °C.

With climate change affecting many regions, the introduction of combined climate classes has become increasingly important. In some areas classified as temperate, summers have become hotter while winters remain cold, and a single climate class such as N may not provide adequate coverage for the required temperature range.

Allows people to decode the values of the noise level in decibels. It is marked in Latin letters like other classes, where A is the quietest class of refrigerators.

The "country of manufacture" refers to the location where a refrigerator model is produced. While most manufacturing plants are situated in China, but there are still some in Europe (in Germany, Hungary, Italy, Poland, Romania, Slovenia, Turkey, etc.). The country of manufacture may not significantly affect the product's quality, although some people associate European assembly with dependability. Additionally, a model may have a country of manufacture listed, such as Poland, even though the same product is produced in China and sold under the same item number in stores.