Укр|Eng|Рус
Ukraine
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Bathroom & Shower   /   Taps

Comparison Hansgrohe Focus 31927000 vs Hansgrohe Focus E2 31926000

Add to comparison
Hansgrohe Focus 31927000
Hansgrohe Focus E2 31926000
Hansgrohe Focus 31927000Hansgrohe Focus E2 31926000
Compare prices 12Compare prices 26
User reviews
TOP sellers
Suitable for
for a washbasin
for a washbasin
Tap typesingle leversingle lever
Spout
Shapestraightstraight
Jet depth119 mm101 mm
Jet height94 mm53 mm
Specs
Stop valveceramicceramic
Water flow
5 L/min /at 3 bar/
7 L/min /at 3 bar water pressure/
Shower / bath
Shower set++
Hose length160 cm160 cm
Installation
Installationdesktop (horizontal)desktop (horizontal)
Mounting holes1 шт1 шт
Mounting hole diameter34 mm
Inlet communication
hoses
hoses
General
Materialbrassbrass
Finish
chrome
chrome
Tap height204 mm133 mm
Country of brand originGermanyGermany
Color
Added to E-Catalogmarch 2018june 2015

Jet depth

Distance from the fixing point (for vertically mounted taps) or from the centre of the mounting hole (for horizontally mounted taps) to the middle of the spout. It is a characteristic that determines the "reach zone" of the tap.

Jet height

The jet height is usually specified for taps with horizontal installation (see "Type of installation"). It is measured from the base of the tap to the spout outlet. The large height of the spout is important primarily for kitchen models (see "Suitable for"), because it allows you to place large dishes in the sink. This parameter is directly related to the height of the spout (see above): the height of the jet cannot be greater than the height of the spout. Thus, in fact, one has to find a compromise between the height of the jet and the dimensions of the tap, especially if there is little space for its installation.

Water flow

The maximum water flow during the operation of the tap, in other words, the maximum amount of water that it can pass through in a minute. This characteristic is important, foremost, for models designed for baths (see "Suitable for"): the greater the throughput, the faster the bath will fill. However, the meaning of this paragraph is not limited to this. First, flow information can be useful in certain calculations related to water supply — for example, to calculate the required pump capacity. Secondly, high-end taps can be equipped with aerators to achieve a powerful and efficient jet with low water consumption; the consumption indicated in the characteristics allows you to evaluate the efficiency of such devices in comparison with analogues.

Mounting hole diameter

The diameter of the holes required to install the tap. This dimension allows you to assess whether the tap will be compatible with a sink, wall, etc., what dimensions the additional parts should have to install it, and whether the holes will need to be widened or narrowed.

Tap height

The height of the tap, measured from its base or lowest point to the highest point of the spout. The height of the spout partly determines the installation possibilities — in fact, this is the minimum vertical free space that is required for the tap. In addition, in models with horizontal installation (see "Type of installation"), the spout height is related to the jet height (see below).
Price graph
Hansgrohe Focus E2 31926000 often compared