Volume
The nominal capacity of a kettle refers to the maximum amount of water that can be safely poured into it, and it is typically indicated by the water level indicator. In the case of brewing sets (see "Type"), the nominal capacity refers to the main kettle, while the capacity of the teapot is listed separately (see below).
The capacity of the electric kettle directly affects the amount of water that can be heated at once. A larger capacity allows for heating more water, but this also means the kettle will be larger and heavier. Additionally, heating a larger volume of water requires either more power or a longer time. Therefore, it is important to consider one's actual needs when choosing a kettle based on its capacity. For example,
mini-kettles for travelling (or for one person) have a volume of up to 1 liter. For home use in a family of 2 – 3 people, a 1,5 – 2 liter model is enough. Devices for
2 – 3 liters are already well suited for a small office or a similar situation. The most spacious electric kettles are designed to hold 10 liters or more, and are typically used in public places such as canteens and cafes for dispensing hot water.
Power in the heating mode
The power consumed by the thermopot (see "Type") in the heating mode, when the device maintains the temperature of the previously heated water. Manufacturers select this power in such a way that the device is guaranteed to be able to maintain the claimed temperature. Therefore, the only point that should be assessed by this feature is the general “voracity” of the thermopot in terms of electricity consumption. However, this mode requires relatively little energy, and the heating power does not exceed 200 W in the most voluminous models.
Coating of the heating element
The outer covering of the heater is a significant factor in determining the characteristics of the kettle because it is in direct contact with the heated water. Therefore, the material used for this coating is an essential consideration in the kettle's properties.
— Stainless steel. "Stainless steel" is the most commonly used coating for kettles as it is affordable and provides good resistance to scale buildup. However, compared to more advanced materials, it may not offer the highest level of scale resistance.
— Aluminium. Another common material, slightly more expensive and resistant to scale than stainless steel, but in general not having significant differences.
— Ceramic. Ceramic coating is known for its exceptional resistance to both scale and corrosion. Although it cannot provide a complete guarantee against scale buildup, it does tend to form plaque at a much slower rate than on surfaces made of steel or aluminium. Additionally, many of these heaters can be cleaned with more aggressive descaling products that would not be suitable for metal coatings. However, due to their high cost, ceramic coatings are typically only used in premium kettles.
— Silver. Silver is another premium material that has good resistance to both scale and corrosion. In addition, it also possesses some antibacterial properties, making it a suitable choice for those who use the kettle to store cooled boiled water. However, the cost of silver pla...ting is quite high.
Temperature adjustment
The temperature adjustment capabilities refer to the specific temperature values that can be programmed into the electric kettle. It's important to note that this refers to automatic adjustment, where the kettle turns off or switches to temperature maintenance mode once the desired temperature has been reached.
If this paragraph contains several options separated by commas (for example, “60 °С, 80 °С, 90 °С”), this means that this model has several fixed temperature options. However, there are also devices with
smooth adjustment, which allows you to adjust the temperature in steps of 5 °C, or even 1 °C; for such devices, the entire adjustment range is indicated here, for example, "60 — 100 °C".
The greater the number of temperature setting options available in an electric kettle, the more versatile it becomes, allowing for precise selection of the optimal brewing mode for various types of drinks. Here is a simple table of recommended temperatures:
—
white tea — 60 °C;
—
yellow tea -70 °C;
—
green tea — 80 °C;
—
black tea — 90 °C;
— rooibos, hibiscus — 100 °C (up to boiling);
—
baby food — 40 °C.
Of course, there are exceptions to such rules — depending on the specific type of drink.
...For example, some varieties of green tea can be brewed at 90 °C.Thermometer
A device that displays the temperature of the water in the kettle. The presence of a
thermometer is useful if the water needs to be heated to a certain temperature. However, the thermometer does not automatically turn off the kettle, unlike a thermostat — this must be done manually. Also, the thermometer allows you to assess how much the heated water has cooled over time and whether it can be used without heating again.
Delay start timer
A function that allows you to pre-set
the start time of the kettle. For example, you can pour water in the evening and set a timer for the morning, so that by the time you woke up, it has just boiled. This eliminates the need to turn on the kettle manually and wait for the water to heat up.
Removable lid
The ability to completely remove the lid of the kettle. Such a possibility is not of particular importance during regular use, however, it provides additional convenience if the kettle needs to be washed from the inside — a
removable lid, unlike a traditional non-removable one, will not hang on the fixture, hit your hands and create other discomforts. On the other hand, there is a certain risk of losing this lid, so this feature is not common.
Opening the lid with a button
Kettles (see "Type") in which the lid opens at the touch of a button. This opening is faster and more convenient, and often safer than the traditional way (grab the lid and pull it up): the lid can get quite hot when the kettle is in operation, and long contact with it is fraught with burns. And although the button can also be placed on the lid, a short press is enough to activate it, and even in such cases the risk of getting burned is minimal. On the other hand,
opening the lid with a button complicates the design of the kettle and reduces its reliability.
Water supply
—
Water supply button. The electric pump button is used to control the built-in pump in the kettle, which is responsible for supplying water to the spout. It is considered to be the most advanced method of water supply as it requires no manual effort from the user, can work with any container, and allows for accurate measurement of the required volume. Some models even provide automatic dosing where the electric pump dispenses a strictly defined volume of liquid with just the touch of a button. However, these supply systems are more expensive and require a power supply, which can be a disadvantage for some users.
—
Hand pump. The mechanical pump with a manual drive is integrated into the lid of the thermopot and is operated by a large button. This type of pump is simple, inexpensive, and does not require electricity to function, which is beneficial in case of power outages. However, it is not very convenient since multiple presses are required to fill even a small cup, and it is difficult to accurately measure the amount of water dispensed. As a result, it is typically used in conjunction with more advanced systems rather than being the sole method of dispensing water.
—
Cup pressing. This method is also known as the "cup-activated dispensing system". It uses an electric pump, similar to the button systems described earlier, but the switch for
...the pump is located near the spout and is activated by the cup's edge instead of by hand. This makes it easy to dispense water by simply bringing the cup to the spout and pressing the switch with the cup's edge. However, this method is not suitable for certain types of cups such as soft plastic or paper cups, and holding the cup while dispensing can be inconvenient as the hot water can burn one's hand through the walls of the cup. Therefore, this method is often combined with a traditional serving button to provide users with the most convenient option for their situation.
