Comparison Electrolux ERN 3213 AOW vs Electrolux ERN 93213 AW

Forced cooling mode is available in some refrigerators, and it significantly increases the cooling intensity of the refrigerator compartment. It's important to note that fast cooling needs to be turned on and off properly to avoid overloading the compressor. Some models have an automatic shut-off feature, but it's important to check for this feature separately.

Retractable guides allow the drawer to roll smoothly on a special roller. The main advantage of "telescopes" is that you do not need to make much effort. On the other hand, such devices are more expensive and are used in premium segment devices.

The lowest temperature provided by a refrigerator freezer.

The lower the freezer temperature indicator, the more advanced the freezer is considered to be, and the better it is suited for long-term food storage with wider capabilities. It's important to note that the standard operating temperature for a fully functional freezer is -18 °C, which is suitable for both storing and freezing pre-frozen foods. Some refrigerators are designed with a temperature indicator of -24 °C, but this is mainly achieved through the quick freezing mode (see "Functions"), and the standard operating temperature is still -18 °C. However, if you plan to freeze food frequently and store it for extended periods, it's better to choose a model with a temperature of -24 °C and consider the freezing power as well.

Less expensive refrigerators have a less advanced freezer with a modest minimum temperature of -12°C or even -6°C, which is only suitable for storing pre-frozen foods, not for freezing fresh food. Although they are much more affordable.

To indicate the temperature of the freezer, markings in the form of asterisks (snowflakes) are often used, each of which means a decrease in temperature by 6 °C. For example, the mentioned -18 °C will correspond to 3 asterisks (***).

Refrigerator control panel. To date, there are such options:

— Rotary switches. While a rotary switch technically has the potential to be used for a wide range of functions, in practice, this variety is typically only found in basic models with limited functionality. In such cases, control is often done manually by turning a thermostat knob, with limited options for adjusting temperature, humidity, and other settings.

— Push-buttons. CRefrigerators can have a control panel with classic buttons that offer various functionalities depending on the model. These functionalities can range from basic adjustments (similar to rotary switches) to fine-tuning of temperature and humidity, control of special modes, and more. Compared to rotary switches, push-buttons generally offer a wider range of possibilities.

— Touch. Touch panels are a modern and stylish control option for refrigerators, which requires a light touch to operate. They are considered the most advanced type of control, providing convenient and extensive functionality. Touch panels are typically installed in premium models, where they add to the device's aesthetic appeal with a minimum of unnecessary protruding parts.

The average amount of energy consumed by a refrigerator in a year of operation.

The given parameter is an estimated value and assumes that the refrigerator operates under stable conditions without sudden temperature changes, frequent door openings, and within its designated climate class (see below). Actual energy consumption may deviate slightly from the stated value. Despite this, it is a useful parameter that allows for a rough comparison of different models in terms of energy efficiency.

It should be noted that the energy consumption per year is often a more practical and convenient parameter than the energy consumption class (see above), which is a relative indicator of how efficient a refrigerator is compared to other models of similar size and features. The energy consumption per year, on the other hand, provides an estimate of the actual electricity cost when using a particular refrigerator. For instance, a small two-door refrigerator with an energy class of A can consume less energy per year than a large side-by-side refrigerator with a class of A+++, despite the fact that the latter is formally more energy-efficient than the former in terms of its energy class.

The "country of manufacture" refers to the location where a refrigerator model is produced. While most manufacturing plants are situated in China, but there are still some in Europe (in Germany, Hungary, Italy, Poland, Romania, Slovenia, Turkey, etc.). The country of manufacture may not significantly affect the product's quality, although some people associate European assembly with dependability. Additionally, a model may have a country of manufacture listed, such as Poland, even though the same product is produced in China and sold under the same item number in stores.