Comparison Treker MAT-100 vs Naturehike Automatic 4

The number of places for which the tent is designed.

In general, double and triple models are the most popular nowadays — they represent a good compromise between spaciousness and comfort on the one hand and weight, price and ease of transportation on the other. Somewhat less common are four-man tents, although they are also quite popular. The smallest one- man products are mainly either trekking tents or fishing tents (mainly for winter use, see "Purpose"). And in the largest structures, the capacity can reach 5 people or even more.

In general, this parameter is most important for traditional tourist tents (expeditionary, trekking, camping), as well as for fishing tents of "carp" specialization (see "Destination"). In the first case, the number of places is indicated by the number of adults of average build who can comfortably sleep inside — provided there are no bulky things in the tent. So when choosing, you should take into account the physique of users, as well as the presence of backpacks or other luggage, which may require space inside. At the same time, some models officially allow accommodation for 1 person more than originally provided; however, this significantly affects comfort and may require the location of the "jack".
...r> In turn, in tents for fishing, the maximum number of carp folding beds, for which the product is designed, is taken into account. At the same time, it is assumed that such folding beds can be used both for recreation and for fishing.

As for other types of tents, the number of places for them is rarely indicated. So, in separate tents-tents, the same rules apply as in ordinary tents — the number of beds is taken into account. In beach tents, a two-person design may be indicated if the product is guaranteed to comfortably accommodate two people. Models for a shower / toilet are, by definition, single-seated, for them there is simply no need to clarify this point; and for camping tents, the very concept of “number of seats” is not relevant.

The total weight of the tent is including the frame and other accessories.

This parameter depends primarily on the purpose (see above), and after that — on seasonality, capacity, and additional functions. For example, in trekking and expedition models, the weight usually does not exceed 5 – 7.5 kg, and the lightest of these products can weigh 2 – 3 kg or even less, while being full-fledged tents for 2 people or even more. However, for a trekking tent, such a small weight with a capacity of more than 2 people usually means that this model is designed exclusively for the summer. For most camping tents, the weight starts at 6 kg, although among them there are also quite light products — by 4 – 5 kg, 3 – 4 kg, or even less (in such cases, light weight can also mean a purely summer specialization). And the most capacious and/or multifunctional models can have a weight of 10 – 15 kg, 15 – 20 kg and even more; in this weight category, you can mainly find tents, camping tents for many people and fishing tents for carp fishing (see "Destination").

When choosing a tent according to this indicator, it is worth considering that it does not always make sense to chase the maximum we...ight reduction. Yes, the light tent is the most convenient to carry; on the other hand, weight reduction inevitably affects one or several other characteristics at once. So, most often, lighter models are either more expensive or smaller in size and less roomy and functional than their heavier counterparts. And sometimes weight reduction also negatively affects the security (including moisture resistance) and the overall reliability of the product. Therefore, it makes sense to specifically look for the lightest tent possible in cases where weight reduction is of key importance; a typical example is long trips, in which all the equipment has to be carried “on oneself” for a long time. And even in such cases, it is worth remembering other important characteristics. For example, for use in late autumn, when frosts are likely, it is better to choose a heavier tent with winter seasonality than a light model that is not designed for winter conditions.

Models with this feature are actually two tents, one of which is located inside the other. In this case, the outer tent is usually made of a dense waterproof material, and the inner one is made of a light, moisture-permeable material. This design provides good thermal insulation and protection against moisture, including from condensate: most of it settles on the outer tent, without penetrating inside. Many double-layer tents allow you to set up only the inner tent separately, which can come in handy in warm weather. The disadvantage of this option is the increased, in comparison with single-layer, dimensions and weight.

The special design of the tent frame, which facilitates its installation.

The specific design of quick install systems may vary. Often, a rigid folding frame is sewn directly into the awning, which eliminates the need to reattach the awning to the arcs every time. An inflatable frame (see "Frame type") or a base made of an elastic material can also be used. The disclosure system itself may also differ from model to model. For example, in many classic tents, an umbrella-type mechanism is used (there are even so-called umbrella tents — see “Purpose”; although the matter is not limited to them). In other models (mostly small products like winter fishing tents), the product is first “flattened” and then bent in a special way, turning into a small flat disk.

The advantage of quick set up systems is evident from the name — they greatly simplify the deployment and folding of the tent. As for the disadvantages, most often this is a high cost due to the complexity of the design, and somewhat reduced reliability (for the same reason). In addition, ease of unfolding does not always mean ease of folding — in some models this is a rather "cunning" procedure.

This paragraph refers to the total number of entrances to the tent. In most cases, their number also describes the possibility of entering the sleeping area. However, there are models with a large vestibule, in which the input is provided from different sides. Such abundant entry/exit options allow the tent to be used in a variety of situations. For example, focusing on the position of the sun, it will be relevant to open the western or eastern side; landscape conditions will not interfere with the installation of a tent, since one of the exits will remain accessible in any case. Well, for a large company at the campsite, vacationers will not interfere with each other.

The number of entrances to the bedroom provided in the design of the tent.

It is worth clarifying that if there are several bedrooms in the design (see "Bedrooms"), then in this case, not the total number of entrances is taken into account, but the number of entrances per bedroom. For example, if a tent has 2 bedrooms, each with 1 entrance, then the specifications will show 1 entrance to the bedroom.

In other words, if the design declares 2 entrances to the bedroom, this means that there are two exits from each bedroom (regardless of the total number of bedrooms). This design is convenient primarily because it is possible to leave the sleeping compartment, if necessary, in the most convenient way, without disturbing the sleeping neighbors once again. .

The wind valve allows you to close the ventilation window to prevent snow or rain from getting inside. Its name is due to the fact that ventilation windows usually do not allow precipitation falling strictly vertically (in calm weather), but a strong wind can bring drops or snowflakes inside.

The number of poles provided in the frame of the tent. For hemispherical types (see "Shape") for 2-3 people, not intended for extreme conditions, 2 poles are considered quite sufficient; larger and/or reinforced models may have more poles. In the case of half-barrels, this amount is directly related to the length of the tent.

Both the rigidity of the frame and the reliability and durability of the tent itself depend on the thickness of the arcs. Usually, the larger and more capacious the tent, the thicker the arches are needed for the frame. Arcs made of plastic and fibreglass most often have a thickness of 7 to 13 mm, while steel and aluminium — from 5 to 16 mm. With an increase in the section of the arcs, the weight of the tent in the folded state also increases.