Comparison Defender Forsage Drift GT vs Genius TwinWheel 900FF

The total number of buttons provided in the design of the manipulator.

The more buttons — the more additional features you can "tie" to the manipulator, the lower the likelihood that during the game you will have to turn to other controls (for example, a PC keyboard). However, many game consoles (see "Platform Compatibility") provide a certain minimum number of buttons for a compatible gamepad — a smaller number simply would not allow full use of all the functions of the console. For example, the original PlayStation 4 controller has 11 buttons.

Note that the D-Pad (see below) is not included in this calculation: it is considered a specific control, although it is based on buttons.

The presence of the D-Pad manipulator in the controller design; the type of such a manipulator can also be specified here.

D-Pad is used to move the character, cursor, etc. in strictly defined, standard directions. In some cases, this can be more convenient than using analogue levers that tilt to either side (see below). As for the varieties, nowadays there are such options:

— 4-position. The classic D-Pad, which appeared at the dawn of game consoles and does not lose popularity nowadays. Available as a set of 4 buttons in a distinctive cross-shaped layout, or as a single solid "multi-sided" button. Anyway, such a device provides 4 fixed directions: up, down, right, left. But to move diagonally, you need to select 2 corresponding directions at once; this is not always convenient, so in this regard, 4-way D-Pads are considered somewhat less practical than the 8-way ones described below. On the other hand, they are also quite functional, while being simpler in design, reliable and inexpensive; and strictly diagonal movements are not required as often as horizontal and vertical ones. So this type of D-Pads can be found even in accessories for the latest generations of game consoles.

— 8-position. A variation of the D-Pad, in which 4 standard directions (2 horizontal, 2 vertical) are supplemented by 4 intermediate — diagonal. In this case, we are usually talking about full-...fledged fixed positions of the manipulator; in other words, to move diagonally, you need to click not on two standard directions, but on one intermediate one. The classic design of this type of D-Pad is a multi-sided button, which is the most suitable option in this case. However, this variety also includes some solutions for 4 separate buttons — provided that these buttons are placed very close, and pressing two at once with one finger is not difficult. Anyway, 8-position manipulators are somewhat more expensive, but more convenient than 4-position ones.

The material from which the steering wheel itself is made in manipulators of the corresponding type (see "Device type").

Note that the basis of the steering wheel is traditionally plastic. Therefore, this parameter is indicated by the material of the outer surface of the steering wheel: it is with this surface that the user's hands are in contact, it is she who is primarily responsible for the appearance of the device and the general impression of its use.

— Rubber. Rubber coating is relatively inexpensive, while it is quite convenient and practical. So, due to its softness and elasticity, such a surface is pleasant to the touch, at the same time it looks quite authentic — similar materials are often used in steering wheels of real cars. Therefore, it is this option that is most popular nowadays. Of the disadvantages of rubber, one can note only poor scratch resistance, but this is a common feature of many fairly advanced steering wheel materials.

— Plastic. Steering wheel made entirely of plastic; the outer coating may differ somewhat from the base, however, both belong to the same class of materials. The key advantage of this option is low cost; in addition, plastic can be made sufficiently resistant to scratches, scuffs and other damage. On the other hand, the plastic surface is somewhat less comfortable than the same rubber, and it does not always look solid and reliable enough. In addition, smooth plastic tends to slip in the hands...(although embossed protrusions or other similar solutions may be provided to compensate for this disadvantage). Therefore, this material is used less often, mainly in relatively inexpensive steering wheels (although there may be exceptions using high-quality plastic grades).

— Leather. The cover is made of artificial, occasionally — genuine leather. These materials belong to the premium class: they have a stylish appearance, are pleasant to the touch, but they also cost accordingly. However a leather substitute can be both high-class and relatively inexpensive — however, in the latter case, there is no need to talk about durability and durability; natural leather, in turn, is by definition quite expensive. On the other hand, such coatings provide maximum authenticity — to the point that the controller "smells like a real steering wheel, and not like a plastic toy."

— Alcantara. A material also known as "faux suede". In fact, it is a variety of the leather (imitation leather) described above, however, it stands out in a separate category, as it has specific features — primarily a characteristic velvety surface. Thanks to this, this material is pleasant to the touch, while it looks great and at the same time is quite durable and practical; It is worth saying that Alcantara is widely used in the decoration and external tuning of real cars, including luxury cars. At the same time, the cost of such a finish, including for game steering wheels, turns out to be considerable; therefore, only some high-end models are made from Alcantara.

The type of gearbox provided in the steering wheel (see "Device type").

— Gear lever. The switch is in the form of a classic lever, as on most serial cars. To work with such a lever, you need to remove your right hand from the steering wheel, but this is not a drawback, but a characteristic feature — this is how everything happens during real driving, and many users appreciate this option precisely for realism. At the same time, the device of the gearshift lever can be different: in the simplest steering wheels it moves back and forth, allowing only sequential gear changes, in more advanced ones it allows you to immediately engage any gear, like on a real manual gearbox.

— Paddle shifters. Switches in the form of petals located under the steering wheel (more precisely, behind the wheel, when viewed from the user's side). This method is used in premium passenger cars, as well as many racing cars. Gear shifting is carried out only sequentially; on the other hand, you do not need to remove your hand from the steering wheel, which increases the reaction speed and provides full control over the steering.

— Gearshift lever and paddle shifters. The presence at the steering wheel of the two methods of gear shifting described above. This allows the user to choose the option of their choice, depending on preferences and the situation: for example, in fast-paced racing, it is mo...re convenient to use the paddles, and in a leisurely truck simulator, the lever provides more realism.

A method of attaching a game pad to a table or other surface. Note that not all types of devices (see above) use mounts — gamepads, for example, do not need them by definition, and the pedals are made on a massive stable base and installed on the floor, so they also do not need latches. In other cases, the following options may be provided:

— Suckers. Classic suction cups that "stick" to the surface of the table. Such fixtures require a fairly flat surface, but in most cases this is not a problem, given the materials used for modern tables. Another advantage of suction cups is that they can be mounted anywhere on the table — not necessarily on the edge, as is the case with many clamps. Among the disadvantages of this option, one can name the fact that as the material of the suction cups wears out, it loses its elasticity, and the reliability of fastening decreases — especially with frequent attachment / detachment. On the other hand, in most cases, the period of effective operation of suction cups is quite comparable with the life of the manipulator itself, so this disadvantage is usually not critical.

— Clamps. Clamps usually take the form of characteristic clamps that allow you to mount the device on the edge of the table top or in another similar place. The main advantage of this option can be called reliability: firstly, a well-clamped clamp holds the manipulator in place much mo...re tightly than suction cups, and secondly, the quality of fastening practically does not deteriorate even with frequent attachments and detachments. On the other hand, the clip can only be used on the edge of a tabletop or on a special stand, which limits the choice of where to install the game pad.

— Bolts. A specific variant used mainly among high-end flight simulator instruments (see "Device type"); almost never found in other types of controllers. With the help of bolts, the instrument clusters are installed in a special rack that imitates the cockpit of an aircraft.

There are models that allow several mounting options: for example, the steering wheel with suction cups can also be equipped with a clamp, which allows you to choose the option at the discretion of the player.