Comparison Sony A6400 kit 16-50 vs Sony A6300 kit 16-50

The result shown by the camera in the DxOMark ranking.

DxOMark is one of the most popular and respected resources for expert camera testing. According to the test results, the camera receives a certain number of points; The more points, the higher the final score.

File formats in which the camera can record video. Given that the footage is designed to be viewed on an external screen, you should make sure that the playback device (DVD player, media centre, etc.) is able to work with the appropriate formats. At the same time, many camera models themselves can play the role of a player by connecting to a TV via an audio / video output or HDMI (see the corresponding paragraphs of the glossary). And if the video materials are to be viewed on a computer, you should not pay special attention to this parameter at all: problems with format incompatibility in such cases rarely occur, but are usually solved by installing the appropriate codec.

Restrictions on the length of the recorded video provided in the design of the camera. In some models, the recording time is limited in time (for example, 30 minutes) — thus, to record a longer video, it will have to be split into separate clips. In others, the duration depends only on the amount of free memory — you can record as long as there is enough space. There is also a combination of these options; in such models, video recording stops as soon as either of the two limits is reached.

— USB C. A universal USB interface that uses a Type C connector. USB ports themselves (all types) are used mainly for connecting the camera to a computer for copying footage, managing settings, updating firmware, etc. Specifically The Type C connector is comparable in size to earlier miniUSB and microUSB, but has a reversible design that allows the plug to be inserted in either direction. In addition, USB C often operates according to the USB 3.1 standard, which allows for connection speeds of up to 10 Gbps - a useful feature when copying large amounts of content.

- HDMI. A comprehensive digital interface that allows you to transmit video (including high resolution) and audio (up to multi-channel) over a single cable. The presence of such a port makes it possible to use the camera as a player: it can be directly connected to a TV, monitor, projector, etc. and view your footage on the big screen. In this case, broadcast capabilities can include not only video playback, but also demonstration of captured photos in slide show mode. HDMI inputs are present in most modern video equipment, and connection is usually not a problem.
Nowadays, there are several versions of the HDMI interface on the market:

• v 1.4. The oldest version currently relevant, released in 2009. However, it supports 3D video, is capable of working with resolutions up to 4096x2160 at a speed of 24 fps, and in Full HD resolution the frame rate can reach...120 fps. In addition to the original v.1.4, there are also improved modifications - v.1.4a and v.1.4b; they are similar in basic capabilities, in both cases the improvements affected mainly work with 3D content.
• v2.0. Significant HDMI update introduced in 2013. In this version, the maximum frame rate in 4K has increased to 60 fps, and support for ultra-wide 21:9 format can also be mentioned. In update v.2.0a, HDR support was added to the interface capabilities; in v.2.0b this function was improved and expanded.
• v 2.1. Despite the similarity in name to v.2.0, this version, released in 2017, was a very large-scale update. In particular, it added support for 8K and even 10 K at speeds up to 120 fps, and also further expanded the capabilities for working with HDR. This version was released with its own cable - HDMI Ultra High Speed; all features of v.2.1 are available only when using cables of this standard, although basic functions can be used with simpler cords.

— Headphone output. Audio output allows you to connect headphones to the camera. As a rule, it is represented by a classic 3.5 mm mini-jack. The presence of such a connector provides the ability to monitor sound during video recording in real time. This is especially important when filming interviews, vlogs and other similar projects.

— Microphone input. Specialized input for connecting an external microphone to the camera. External microphones are significantly superior to built-in microphones in sound quality. Firstly, they are not so sensitive to the camera’s “own” sounds - from buttons, control wheels, focus motors, etc. (and if the microphone uses a long wire and is not attached to the body, these sounds will not be heard at all). Secondly, external microphones themselves have more advanced characteristics. On the other hand, their use is justified mainly for professional video recording; therefore, the presence of a microphone input, as a rule, corresponds to advanced video recording capabilities

Autofocus operating modes provided in the camera design.

— One picture. The main mode of autofocus operation is found in all modern cameras and is used most often. Designed for shooting motionless objects.

— Follower. This mode is used for shooting moving objects, the distance to which is constantly changing: the camera constantly monitors the position of the object, constantly adjusting the optics so that it is in focus. Usually found in middle and upper class cells.

— AI focus. A peculiar combination of the previous two modes is used when a stationary object can start moving at any moment. If the scene is static, autofocus works in the single frame mode, but if the object on which focus is made starts to move, the device switches to tracking autofocus mode. AI mode allows you to almost instantly set the optimal autofocus settings, which is especially useful for sequential shooting. Initially, it was found in expensive models, however, thanks to the development of technology, today it can even be used in inexpensive compacts (see “Camera type”).

— By the face. Autofocus mode that uses a face recognition system and focuses on them. This feature is especially useful for taking pictures of people at a great distance from the camera, when the face is much smaller than the frame size, such as in group shots.

— With a smile. A further development of the face autofocus mode described above, when, in accordance with the nam...e, the system reacts not just to a face, but to a smile. This mode can be combined with the function of automatic shooting at the moment of a smile.

— Animal in the frame. A mode designed primarily for shooting animals, which can be difficult (and often impossible) to make them sit still in the frame. It is usually a variation of the tracking autofocus described above, but specific features of operation may vary depending on the camera model.

This list is not exhaustive, and other specific autofocus modes may be provided in the design of modern cameras.

The presence of the touch focus function in the design of the camera.

Such focus is necessarily combined with a touch screen (see below). It gives the photographer the opportunity to independently choose a point for focus in the frame being shot: for this, it is enough to touch this point on the image displayed on the screen. Touch focus is extremely simple and intuitive, and therefore very convenient, especially for beginners and non-professional users.

The shutter is a system that regulates the duration of exposure, that is, the effect of light on the matrix (for more details on exposure, see above). Here are the main types of such systems:

— Electronic. A type of shutter that is only suitable for digital cameras. Such systems do not have moving mechanical parts; exposure in them is carried out electronically. At the moment the shutter is pressed, when the shutter is “opened”, the matrix is completely reset; and after a certain time (corresponding to the exposure time), when the shutter is “closing”, the accumulated charge is read from it. This allows you to carry out full-fledged photography and work with different shutter speeds without using complex structures. Another advantage over the mechanical shutters described below is that such systems are perfect for Live View (see above): the matrix can constantly broadcast the image on the screen, only sometimes “interrupting” directly into shooting. On the other hand, such a constant work increases the likelihood of heating and the appearance of additional noise in the picture. To compensate for this shortcoming, various solutions are used, and in most cases it is almost invisible; however, for professional photography, electronic shutters are still considered less suitable than mechanical shutters.

— Mechanical. There are many types of mechanical shutters, however, in modern dig...ital cameras, systems in the form of a pair of shutters are predominantly found. When the shutter opens, one of the curtains moves, and then the second “catches up” with it, closing the matrix. The main advantage of mechanical shutters is that when using them, the matrix always remains closed and opens only at the moment of shooting for a time corresponding to the set shutter speed (similar to how it happens in film cameras). Due to this, it is possible to avoid heating the sensor and the associated increase in image noise. On the other hand, additional mechanisms noticeably affect the weight, dimensions, cost and power consumption of the camera; when shooting fast moving objects, distortions may occur, and at low temperatures — failures and even failures. In addition, cameras with mechanical shutters are mainly designed to work through an optical viewfinder. For an electronic viewfinder or Live View mode (see above), you either need to install an auxiliary matrix (which further complicates and increases the cost of the design), or completely open the shutters and actually shoot in electronic shutter mode, which makes the very idea of \u200b\u200b"mechanics" meaningless. As a result, this type of shutter is currently used mainly in SLR cameras (see "Camera type") of the middle and top levels; it is also found in other varieties, but much less frequently.

— Electronic/mechanical. Systems that combine both options described above; more precisely, even — mechanical shutters, supplemented by the ability to work in electronic mode. One of the key disadvantages of purely mechanical systems is their poor suitability for ultra-short shutter speeds — it is not easy to provide the necessary shutter speed, and besides, the mechanism is subjected to significant loads in this mode. To eliminate this shortcoming, electronic-mechanical systems were created. They work as follows: at short shutter speeds, a purely mechanical method of operation is used up to a certain limit, and when the possibilities of mechanics are not enough, a combined mode is used. In this mode, the shutter curtains open for a relatively long time (longer than the required shutter speed), while the matrix works electronically (see above for more details), providing the required shutter speed. Theoretically, the combined method allows you to effectively shoot at ultra-low shutter speeds, but in fact the quality of the images is relatively low, and the “hybrid” shutter is often more of a marketing ploy than a really useful tool.

A touch-sensitive screen that allows the photographer to control camera functions. It is believed that such management is the most obvious; in addition, with its help, you can implement some additional features that are not available for other types of control — for example, touch focus (see above). And for models with Android OS (see below), the touch screen is a mandatory piece of equipment. On the other hand, such screens are more expensive than conventional ones, which can accordingly affect the price of the camera.

- GPS module. The camera has a built-in GPS satellite navigation module. In digital cameras, the GPS module is used primarily for setting the so-called. geo-tagging to photos: information about specific geographical coordinates of the shooting location is recorded in the service information about each image. However, the matter is not limited to this, and models with this function can have many additional features - from classic navigation to special programs like a database of points of interest with hints based on the current location.

- WiFi. A wireless standard originally developed for computer networking, but more recently allowing for direct connection between devices. The ways in which Wi-Fi is used in cameras can vary. Thus, the most popular option is to connect to a smartphone, tablet or other similar device for remote control (see below) and / or transfer footage to an external device. Some cameras have built-in software that allows you to directly connect to the Internet through wireless access points and upload photos and videos to popular network services. And in models running Android (see above), specific features depend only on the installed software and may include full access to social networks through client programs (see below) and even web surfing through a browser.

— Bluetooth. A wireless interface used to communicate with various electronic devices. In camera...s, Bluetooth is most often used to connect to a computer or laptop and transfer footage; In addition, it allows you to use the direct printing function on printers equipped with Bluetooth. The range of Bluetooth communication is up to 10 m, and the devices do not necessarily have to be in direct line of sight to each other.

- NFC chip. NFC (Near-Field Communication) is a wireless communication technology designed to connect various portable devices with each other at a distance of up to several centimeters. In cameras it plays an auxiliary role, designed to facilitate connection with other devices (smartphones, tablets, etc.) using a longer-range standard (Wi-Fi or Bluetooth). Instead of delving into the settings - looking for devices, connecting them manually - just bring the NFC camera to a gadget equipped with the same chip and confirm the connection request.

— Control from a smartphone. The ability to remotely control the camera using a smartphone, tablet or other similar gadget. The connection between the camera and the control device is usually carried out via Wi-Fi (see above), while a special application is used for control, and the gadget’s screen plays the role of a viewfinder. The specific capabilities of such control can be different - releasing the shutter on command, selecting exposure parameters and other shooting settings, focusing by touch, etc. Often, it is also possible to “drain” the footage onto the control device and, through it, to the Internet. Note that for cameras used with mobile phones (see “Camera Type”), this function is not indicated: such a camera is usually mounted directly on the device, and there is no talk of remote control.