Укр|Eng|Рус
Ukraine
Catalog   /   Small Appliances   /   Home Appliances   /   Water Filters

Comparison Atoll A-550m STD vs Gejzer Prestige M

Add to comparison
Atoll A-550m STD
Gejzer Prestige M
Atoll A-550m STDGejzer Prestige M
from 5 795 ₴
Outdated Product
from 4 999 ₴
Outdated Product
User reviews
Main
Effective purification of tap water. Reverse osmosis. Water mineralizer. Double tap included.
Typekitchen sinkkitchen sink
Reverse osmosis
Connectionto the water supplyto the water supply
Purpose
for cold water
for cold water
Specs
Number of flasks33
Stages of purification55
Pollution clipping0.01 µm0.01 µm
Filtration speed0.6 L/min0.14 L/min
Tank volume12 L
12 L /usable volume 7.5 L/
Resource10 ths of L3.5 ths of L
Min. operating pressure3 atm
Max. operating pressure6 atm8 atm
Max operating temperature40 °C40 °C
Water mineralization
Filtration
Types of filtration
mechanical impurities
organic impurities
active chlorine
ferrous
heavy metal ions
pesticides
nitrates
cadmium
petroleum products
hardness salts
mechanical impurities
organic impurities
active chlorine
ferrous
heavy metal ions
pesticides
nitrates
cadmium
petroleum products
hardness salts
More features
Replacement cartridges
Pentek P-5, Pentek GAC-10, Pentek P-1, Filmtec TW30-1812-50, /Pentek GS-10 CAL/RO/
Tap
Dimensions42x15x43 cm
39х40x14 cm /without storage tank/
Added to E-Catalogoctober 2014february 2021

Filtration speed

The amount of water that the filter is able to pass through itself per unit of time (of course, effectively purified in the process); usually stated in liters per minute. This parameter is largely related to the type (see above): for example, in jugs, the filtration rate usually does not exceed 0.5 L per minute, while for main devices that supply entire apartments, a throughput of tens or even hundreds of liters is required.

Note that it does not always make sense to pursue a high filtration rate. After all, other things being equal, finer cleaning takes more time; accordingly, the faster the filter works, the higher the chance that the quality of such cleaning will be relatively low. And devices that purify water efficiently and quickly usually have an appropriate price. Therefore, it is worth considering the purpose of the filter and, on the basis of this, determine the balance between the filtration speed and its quality when choosing. It is also worth keeping in mind the conditions of use: for example, if you need to filter low-quality tap water for drinking, it is better to sacrifice speed in favor of efficiency.

Resource

The resource can be described as the total amount of water (in thousands of liters) that the filter is able to clean before the cartridge needs to be changed. Usually, it is indicated for a standard filter element (see "Removable cartridges").

Different types of filters (see above) can significantly differ in resource, depending on the features of their application. However, for all models, the rule applies: do not use a cartridge that has exhausted its resource. This is due not only to a drop in filtration efficiency — an “overfilled” filter can begin to release the accumulated contents into the water, further degrading its quality. Since it can be quite difficult to monitor of a specific amount of treated water, many manufacturers indicate the approximate time in which it will be exhausted with an average intensity of use in addition to the resource. Usually it is a few months, but there are exceptions. In addition, for the convenience of the user, various indicators can be provided in the filter design (see "Cartridge replacement indicator").

In models with a multi-stage design (see "Stages of purification"), where there are several cartridges, their resource usually differs, and the total filter resource is usually indicated by the least durable cartridge, that is, until the first replacement of any of the filter elements.

Min. operating pressure

The lowest inlet water pressure at which the filter is able to fully perform its functions. Indicated for models with a connection to the water supply — directly or through a tap (see "Connection").

The design of some filters requires a certain level of inlet pressure for normal operation; if the pressure is insufficient, both throughput and overall filter efficiency suffer, and some functions are not available at all. The latter is especially true for reverse osmosis (see above). Therefore, if the minimum operating pressure is directly indicated in the filter characteristics, you should make sure that your water supply system complies with this parameter before purchasing.

Note that for filters with a booster pump, this column indicates the lowest pressure at which the filter still does not require the use of a pump; see "Pump" for details.

Max. operating pressure

The highest inlet water pressure at which a filter connected to a tap or water supply can operate indefinitely (at least until the resource is exhausted, see above) without breakdowns, failures, etc. In other words, this is the ultimate strength of the filter. Therefore, this parameter has a great importance, and when choosing a filter, you must make sure that it meets the characteristics of the connection point. In this case, it is best to choose a model with a margin: although the device will not break from short-term pressure surges in excess of the working device, but this will create off-design loads and can lead to early failure.

When buying a filter for ordinary domestic use, it can be assumed that the maximum pressure in the water supply, provided for by the housing and communal services standards of most post-Soviet countries, represents 6 atm, but its actual value is usually lower. Therefore, 6 atm filters are quite suitable for the definition of a “model with a margin” for apartments with medium and especially low water pressure.

Replacement cartridges

Models of replaceable cartridges for which the filter is designed. Knowing the names of models, it will be much easier for you to find a replacement for an exhausted cartridge. In addition, the options directly named by the manufacturer are fully compatible with the filter and correspond to official specifications, while there is no such guarantee for "non-native" cartridges.

Several names in this paragraph are usually indicated for filters with multi-stage filtration (see "Stages of purification") — a cartridge for each stage.
Price graph
Atoll A-550m STD often compared
Gejzer Prestige M often compared