Укр|Eng|Рус
Ukraine
Catalog   /   Kids & Toys   /   Kid's Room   /   Car Seats

Comparison Cybex Cloud Z i-Size vs Cybex Aton M i-Size

Add to comparison
Cybex Cloud Z i-Size
Cybex Aton M i-Size
Cybex Cloud Z i-SizeCybex Aton M i-Size
Compare prices 5
from 12 246 ₴
Outdated Product
TOP sellers
Main
The model is compatible with the Isofix Z base. Installation on the Cybex stroller chassis. Many color options. High safety score according to the ADAC test.
Anatomic insert for newborns. Multi-step headrest adjustment. Retractable sun canopy. Telescopic side protection. Possibility of installation on the chassis of a stroller.
Weight group
0+ (0 – 13 kg)
0+ (0 – 13 kg)
ADAC test result
very good (< 1.5) /1.4/
good (1.6 – 2.5) /1.7/
i-Size
Age range
1 – 12 months
1 – 12 months
Installation
seat belt
ISOFIX
seat belt
 
Installation
rear facing
rear facing
Correct installation indicator
Adjustments
headrest height /11 positions/
belt height /with headrest/
headrest height /11 positions/
belt height /with headrest/
Equipment
no iSOFIX base
 
anatomical cushion
sun canopy
foot cover
 
removable cover
anatomical cushion
sun canopy
 
Additional side protection
Harness type3-point3-point
Weight4.8 kg
Country of originGermanyGermany
Color
Added to E-Catalogapril 2019march 2019

ADAC test result

The results shown by the seat in crash tests according to the standards of ADAC — the General German Automobile Club, an authoritative European organization of motorists.

Car seats in such tests are evaluated in several categories, but in this point only one parameter is taken into account — the safety of the child, his/her protection in emergency situations. The results of such a test are indicated by the number of points; the fewer points in the end — the safer the product. It should be noted that the ADAC standards are much stricter than those by which the seat is evaluated during mandatory certification; tests are conducted with different directions of impacts (frontal and side), with dummies of different ages and so on. Therefore, the result of the ADAC test very reliably describes the real level of protection that the product provides in accidents.

According to this indicator, modern car seats can be divided into the following categories:

very good (< 1.5);
good (1.6 – 2.5);
satisfactory (2.6 – 3.5);
acceptable (3.6 – 4.5);
— unacceptable (more than 4.5).

The downside of a good value is usually a higher price; however, in an accident, that price may be a very small price to pay for the extra protection that can save your baby's life and health. ...r>
In conclusion, it should be noted that ADAC test methods are constantly being improved and tests are conducted every year. Therefore, when choosing a seat and comparing it with its counterparts, you should also pay attention to the year of manufacture; as a rule, newer products with the same number of points give a higher actual level of protection than older ones.

Installation

Seat belt. Installation with the car seat belt. In weight groups 0, 0+ and 1, only the seat is secured in this way; the child's safety is ensured by the seat's own belts. In weight groups 2 and 3, the car belt is used to secure both the seat and the child.

Tor Tether. An additional harness to increase the security of fixation used in seats with Isofix and Latch systems (see below). One end of the harness is attached to the upper part of the backrest and the other end is attached to a special bracket installed in the floor of the car behind the seat or in the trunk. This reduces the likelihood of the seat being knocked over in a sudden braking or frontal impact and increases the overall safety of the small passenger.

Support leg. An additional attachment in the form of a support running from the bottom of the seat to the floor of the car. The purpose is similar to the Top Tether described above: it increases the safety of the seat and reduces the risk of the seat toppling when the car comes to a sudden stop. It is most often used with the Isofix system.

ISOFIX. The installation system for car seats in the weight category up to 18 kg is primarily found in cars from European manufacturers. The seat is secured with two locks in the rear lower part, with optional additional attachments at the...top and/or bottom. The design ensures foolproof installation, making it nearly impossible to install the seat incorrectly. Isofix requires the car to be equipped with suitable brackets, but even without them, these seats can usually be securely installed using the regular seat belt. However, this option may not be cost-effective, as seats with the Isofix system tend to be relatively expensive.

LATCH. Installation system similar to Isofix. It is used mainly in American cars and, accordingly, in car seats of American manufacturers. The seat is attached at three points — two at the bottom of the seat and one at the top — so that the seat cannot be installed incorrectly. Like Isofix, seats with Latch also allow fixation with the normal car seat belt.

Correct installation indicator

The presence in the design of the child restraint system of special indicators of correct installation. They help ensure that the child car seat is installed correctly and follows all prescribed safety guidelines. Most often, such indicators are represented by special marks that change color or position when the car seat is installed correctly. Such indicators are placed on Isofix system locks, seat belts for fastening a child, etc. And some models for the youngest passengers have built-in levels or angle indicators that help set the seat in the correct position, facing the rear of the vehicle.

Equipment

Isofix base. The product is equipped with a separate Isofix base, which is fixed in the interior of the car on the appropriate fixing clips, and the car seat is installed directly on it. The use of the base provides reliable fixation of the car seat and reduces the risk of its incorrect installation. On the Isofix base are installed mainly car seats of age groups 0+ and 1, some models assume the possibility of placing seats for older kids. It should be noted that car seat models without an Isofix base are also widely available on the market. — Removable cover. Removable car seat cover for cleaning and/or washing. This function is especially useful if the seat is used when feeding a kid.

Anatomical cushion. Depending on the age group, it can either be a special horseshoe-shaped cushion to support the kid's head (for the youngest ones who are still unable to hold their head on their own), or a special soft headrest that fixes the head from behind and to the sides (for older kids).

Armrests. Armrests refer to the handles placed on the sides of a seat where one can rest their elbows and forearms. They reduce fatigue in the neck and shoulders of a child during prolonged sitting.

Sun canopy. Plastic (most often) canopy to p...rotect the kid from the sun or bright light.

Foot cover. A cover that covers the kid's legs and lower body. It is used in seats of age group 0.

Cup holder. A device used in car seats to hold a bottle of drink or formula for feeding. Most often done removable.

Additional side protection

The car seat has structural elements that further protect the child from side impacts. At least such elements include sidewalls for head protection made of impact-absorbing material such as polyurethane foam; torso protection may also be provided. If you are looking for a car seat with the maximum level of protection, you should choose from models with additional side protection.
Price graph
Cybex Cloud Z i-Size often compared