Comparison GoodLuck GL-4300BC vs Viper CG430B

The capture width provided by the unit, in other words, the width of the strip of land cultivated in one pass. In fact, this size corresponds to the width of the working nozzle.

The large working width is useful when processing large open spaces, as it allows you to finish the job in a small number of passes. On the other hand, for hard-to-reach places, relatively narrow tools are better suited, able to go where a wider unit will not fit. In addition, the width of the tool directly affects the weight and price.

In general, it makes sense to compare in terms of working width only units of the same type (see above). However, it is worth noting here that trimmers do not differ so much from each other — most models capture from 25 to 45 cm (and a wide processing band is provided by moving the nozzle from side to side). As for the other types, in the most modest models the capture width does not exceed 40 cm, in the heaviest and most powerful it can be 56 – 60 cm or even more(in mini tractors — up to 1.5 m).

The width (diameter) of the trimmer knife characterizes the size of the paddle knife (or saw blade). Such a nozzle has a smaller capture width than a fishing line, however, it allows you to mow more dense thickets, including shrubs.

The diameter of the fishing line supplied with the trimmer (more precisely, with a reel attachment, see "Tips").

In modern models, this parameter can be from 1 to 4 mm. At the same time, a thicker fishing line handles better with dense thickets, but it works rougher, the treated lawn is not particularly even, and for the effective operation of such a nozzle, a fairly powerful engine is needed. On the other hand, a fine line provides a clean and neat cut, but is not suitable for heavy vegetation and large stems. Thus, thick fishing line is usually equipped with powerful units designed for "launched" lawns with an abundance of thick stems. Thin, on the other hand, is found mainly in low-power electric trimmers with a lower engine location, designed for neat lawns with regularly cut grass.

We also recall that many trimmers have the ability to replace the standard reel with another one that differs in line thickness.

— Adjustment of an inclination of a bar. The ability to tilt the bar or the working head relative to the bar. The setting will come in handy for mowing grass in hard-to-reach places. Trimmers with this function are much more convenient to work under swings, benches and garden furniture. Also, by adjusting the inclination of the rod, you can adjust the grip of the trimmer to the height of the user.

- Telescopic rod. The possibility of increasing the length of the trimmer by lengthening the bar. Due to the design features, this solution is available only for models with a lower engine and helps to maximally adjust the device for a person of any height.

- Collapsible bar. The ability to disassemble the trimmer bar into several parts. This feature greatly simplifies storage and transport: it is easier to pack, carry and transport components folded side by side than a solid long rod. Theoretically, this design is less reliable than non-separable, however, trimmers are usually not subjected to such high loads that this is noticeable.

- Shoulder strap. Strap for carrying the trimmer on the shoulder - including during operation. This design significantly simplifies the operator's task and reduces fatigue: carrying on the shoulder is not as tiring as holding it in the hands of weight. Note that in models w...ithout a shoulder strap, it may be possible to purchase it separately; however, it is easier (and often cheaper) to buy a tool with this accessory right away.

— Restrictive bracket. The bracket acts as a limiter and is designed to protect high (necessary) vegetation from mowing. Those. you can put forward a small structural element at the base of the bar, which, approaching the bushes, will move them away, thereby not cutting them off. The bracket will also be appropriate when mowing a site with a fence, a decorative landscape with many elements that can be damaged during mowing, or they themselves can “shorten” the fishing line once again by breaking off its ends.

- Swivel head. Possibility of rotation of a working nozzle of a trimmer on a bar. Typically this function is used to change the cutting system from a horizontal position to a vertical position. Cutting in a vertical plane can be useful, for example, for leveling edges and forming borders on lawns.

- Edging roller. The roller is necessary for a neat "haircut" between the lawn and the sidewalk. It is found in models with a swivel head and is designed for more comfortable work. Since the device does not need to be suspended, it is much easier to frame flower beds, decorative elements on the lawn, borders, etc., relying on the roller.

- Support rollers. Special rollers mounted on the cutting head of the trimmer. Thanks to these rollers, you can rest the head on the ground and roll the tool in front of you - this is more convenient than carrying it "on yourself". Another advantage is that the rollers keep the working attachment at the same height, which means that mowing is as accurate as possible, almost like using a conventional lawn mower (with all the advantages of a trimmer). The main disadvantages of models with rollers are the high cost, as well as the increased weight, which makes it difficult to work “off the ground”.

- Bladed knife. A knife in the form of a pair of blades, rotating around a vertical axis in the manner of a propeller blade. Two blades are the most popular, almost standard option for rotary lawn mowers (see "Cutting System"). Note that in the case of trimmers, the use of a knife allows you to achieve higher productivity and better cope with thick grass than using a line reel. On the other hand, blades do not tolerate contact with stones and other hard objects very well; in case of such troubles, various tricks can be provided (for example, an automatic engine brake).

- Spindle knife. Nozzles used in spindle-type lawn mowers. For more information about such units, see "Cutting system", here we recall that spindle knives are inferior to bladed ones in terms of performance and efficiency in thick grass, however, they provide a "cleaner" cut, which allows you to give the lawn the most accurate appearance. So this option is well suited for regular cutting of relatively sparse, well-groomed vegetation.

- Reel with fishing line. Most often used in trimmers (see "Type"). According to the general principle of operation, it is similar to a bladed knife (see above), however, in this case, the working tool is not blades, but pieces of thick fishing line rotating at high speed. The main advantage of the fishing line over a bladed knife is its almost comple...te insensitivity to collisions with stones and other solid objects: such a “blade” will only bend from impact and literally immediately straighten due to centrifugal force. True, such nozzles cope with thick stems somewhat worse, but in practice it all depends on the thickness of the fishing line (see above) and the speed of its rotation.

- Cultivator. Nozzle designed to loosen the soil. Outwardly, it is a set of gears mounted on a horizontal axis with teeth of a specific bent shape. Due to the rotation of these wheels, loosening is carried out. Combisystems are mainly equipped with such nozzles (see "Type"). At the same time, the width of the cultivator is usually small, it is poorly suited for full-fledged garden work, but it can be useful when processing a small flower bed or several beds.

- Saw blade. Attachment for cutting relatively thick, stiff stems (e.g. bushes or small tree branches). Mounted mainly on trimmers (see "Type"). Outwardly, such a nozzle is very similar to the working element of a circular saw: it uses a rotating rim with characteristic teeth along the edges. The rim may have holes - to reduce weight.

- Scissor mower. In this case, it means a special attachment, most often used in mowers (see "Type"). Such a nozzle has the form of a characteristic horizontal "comb" with two rows of teeth moving relative to each other. Its design is described in more detail in the “Cutting system - Scissor” section, here we note that hay trimmers are indispensable when working with dense vegetation and thick stems, they easily cope with thickets that are “too tough” for other attachments.

- Without nozzles. The absence of any nozzles in the regular configuration of the lawn mower. It is assumed that the customer will purchase them separately for specific needs.

The volume of the fuel tank in a gasoline or diesel mower (see "Engine type").

A large tank allows you to work longer without refueling, but an excessive increase in capacity affects the dimensions and weight of the entire unit. So manufacturers usually select this indicator taking into account the power and fuel consumption of a particular engine, and in general, the volume of the tank is not critical when choosing. However, knowing the tank capacity and fuel consumption (see above), you can estimate how much one refueling will approximately last.

The level of noise produced by the device during operation. Usually, a certain average indicator is indicated in the characteristics — in the standard mode of operation; however, the actual values usually do not differ much from the claimed ones.

The lower the noise level, the more convenient the unit to use and the less tired the operator. In the case of lawn mowers, this is especially true, since such equipment is quite noisy — even the quietest models (some robots) give out about 47 – 48 dB, which is comparable to talking at an average volume. Note that the decibel is a non-linear quantity, and it is easiest to evaluate the actual loudness using comparative tables. Here is the simplest table for the values found in modern lawn mowers:

— 60 – 65 dB — talking in raised tones at a distance of about 1 m;
70 dB — loud conversation of several people at the same distance;
75 dB — loud laughter at a distance of 1 m;
80 dB — motorcycle engine, medium power vacuum cleaner.
90 dB — loud screams, freight car at a distance of 7 – 10 m;
100 dB — a subway train or a loud car signal at a distance of 5 – 7 m, an industrial workshop;
110 dB — tractor engine at a distance of about 1 m.

In addition to subjective sensations, there are specific sanitary standards that limit the impact of strong noise. So, according to European standards, noise of 85 dB is allowed to be heard without protective equipment for 8 hours, 91 dB — 2 hours, 97...dB — half an hour, and 103 dB — only 7 minutes. So when choosing a unit, you should take into account the duration of work with it — with high noise, you may need protective headphones.