Comparison Oral-B Pro 790 Cross Action vs Oral-B Smart 4 4900 D601.525

The number of operating modes provided in the device. For flossing systems (see "Type"), this paragraph takes into account the characteristics of the irrigator; data on the toothbrush (if they differ) are indicated in the note.

The mode in this case means the general format of operation, as explained in more detail in the "Modes" section below. It's important not to confuse this parameter with the number of power settings, which are discussed separately in the "Power modes" section. These characteristics are generally distinct from each other. For instance, a toothbrush with one operating mode may have multiple power settings, and conversely, there can be just one power level with several operating formats.

Anyway, the presence of several modes significantly expands the functionality of the brush/irrigator, allowing the device to be used for different procedures (or for several users with different needs in terms of oral hygiene). The flip side of this versatility is the increased cost. In addition, note that with the same number of modes, a specific set of these modes in different models may be different; so before buying, be sure to clarify how the capabilities of the selected model meet your requirements.

Modes of operation supported by the device.

Toothbrushes nowadays offer a wide range of modes beyond the traditional daily cleaning (often referred to as "2D" mode). You can find toothbrushes with options like the advanced 3D mode, as well as programs for gentle and deep cleaning, polishing, whitening, gum massage and tongue cleaning. On the other hand, irrigators typically offer different modes in addition to the standard continuous water jet. These additional modes often include pulsation and spray options.

Here is a detailed description of the most popular options found in brushes:

— Daily cleaning (2D). The "2D" mode of operation in toothbrushes closely resembles the traditional manual toothbrush experience. In this mode, the bristles of the brush move in a single plane, and the exact movement pattern may vary depending on the cleaning technology used. The intensity of brushing is typically medium to high, making it suitable for individuals with relatively healthy and not overly sensitive teeth. The recommended daily brushing time is 2 minutes, with 30 seconds allocated to each quadrant of the mouth. These corresponding settings are usually available in the timer function, if the to...othbrush is equipped with one. While "2D" brushing is somewhat less effective than "3D" (as mentioned below), it's a feature that can even be found in more affordable toothbrush models.

— Daily cleaning (3D). This feature, available in brushes with reciprocating-rotating and reciprocating-sweeping technology, involves bristle pulsation in addition to the standard cleaning motion. The pulsating movement, which goes deep into the brush head and back, enables cleaning in three dimensions simultaneously. This greatly enhances efficiency compared to the 2D cleaning mentioned earlier. These bristles not only address the outer tooth surfaces but also reach the sides and interdental spaces to some extent (though it's not a complete replacement for dental floss). However, it's worth noting that this advanced functionality typically comes at a higher cost.

— Gentle cleaning. The gentle treatment program, typically used for sensitive teeth and gums prone to bleeding, is common in brushes with reciprocating-rotating and reciprocating-brushing technologies. In these brushes, the gentle mode often involves reducing the nozzle's rotation or vibration speed. In sonic and ultrasonic models, gentler treatment is achieved by reducing vibration intensity. Regardless of the technology, this mode aims to minimize discomfort during brushing and the risk of gum damage, even when using standard nozzles. For the gentlest effect, it's advisable to use this function with a nozzle designed for sensitive teeth.

— Deep cleaning. Most often, this name means cleaning with a standard intensity, but an increased duration — for example, 3 minutes instead of the usual 2 minutes (45 seconds for each quadrant of the mouth instead of the traditional 30 seconds). This mode allows you to effectively clean your teeth and remove dirt, for which normal daily brushing is not enough.

— Polishing. A mode for treating relatively clean teeth that do not require a full-length cleaning. Usually, polishing is carried out at a reduced frequency of vibrations (rotations) and takes noticeably less time than conventional processing (for example, 1 minute instead of the traditional 2 minutes).

— Whitening. A special mode for whitening tooth enamel and removing stains, especially from the front teeth, is often an extended version of the regular brushing mode. For example, in a whitening mode, the brush might operate normally for 2 minutes and then switch to increased intensity for 30 seconds. Specific details about this mode, including any contraindications (especially for individuals with sensitive teeth or gum issues), should be checked separately.

— Massage gums. Gum treatment can be offered either as a separate program or as an add-on to the regular brushing routine. In the latter case, it typically involves a standard 2-minute toothbrushing program followed by activating an additional mode. This function not only ensures effective cleaning but also contributes to gum strengthening. It can be beneficial for addressing issues like inflammation and bleeding gums, although consulting a dentist is advisable in such cases.

— Cleaning the tongue. A separate mode for tongue cleaning is available in many electric toothbrushes. Brushing the tongue with an electric toothbrush can often cause discomfort due to tickling, so this mode typically offers a brief cleaning session lasting about 20 seconds. If needed, you can perform multiple sessions. It's important to note that the presence of a tongue cleaning mode doesn't necessarily mean that a specialized nozzle for tongue cleaning is included in the kit (as discussed in the "Nozzles" section), although it's commonly included.

It should be noted that in some toothbrushes, the mode change is carried out due to “smart” nozzles: when such a nozzle is installed, the device recognizes it by the built-in chip and automatically switches to the appropriate programme.

In turn, in irrigators, the features of the main modes are as follows:

— Jet (monoflow). The classic, most popular working format: a constant jet with a constant pressure. Provides sufficient efficiency for most tasks for which irrigators are used, while being extremely simple to implement and can be provided even in the most inexpensive models.

— Pulsating. Water supply with variable pressure. This mode is especially effective for removing dirt from the interdental space, under braces and in other hard-to-reach places.

— Spray. In this mode, a mixture of water and air is fed through the nozzle, due to which, instead of the usual jet, a cloud of small droplets flying at high speed is obtained at the exit. This mode is great for massaging the gums and general cleaning of the mouth.

This parameter represents the highest pulsation frequency achievable by the device. It's specified for brushes that support pulsating cleaning technology (as explained above), as well as for irrigators equipped with a jet pulsation mode. In the case of flossing systems (as mentioned in the "Type" section), this section typically provides information about the irrigator's pulsation frequency, and details about the toothbrush's pulsation frequency (if applicable) are mentioned separately in a note to this paragraph.

The high frequency of pulsation (40 000/min and more) in toothbrushes provides high efficiency, allowing you to quickly and efficiently deal with dense plaque and even tartar. On the other hand, too intensive processing is also undesirable — for example, with high sensitivity of the teeth. All this is also true for irrigators — except that the operating frequencies in them are noticeably lower, such devices rarely produce more than 2K pulsations per minute.

In view of all this, it does not always make sense to chase the maximum frequency of pulsations — it is worth considering the individual characteristics of the user. And ideally, before choosing a brush or irrigator with pulsation, you should consult a dentist; this will not hurt even with healthy teeth, and even with problems with teeth or gums, it is highly recommended.

The ability to synchronize the device with a smartphone, tablet or other similar gadget. It is found mainly in toothbrushes, but can also be used in other types of devices (see "Type").

Synchronization with an external gadget, typically via Bluetooth, requires the installation of a dedicated application. The functionality of this app determines the available features when using the toothbrush with a smartphone or tablet. However, these functions extend well beyond what the toothbrush can do on its own, thanks to the smartphone or tablet's screen capabilities. Common features include displaying a timer countdown and the ability to customize the timer settings if the default values don't meet the user's preferences. The application also typically provides other relevant information, such as the selected brushing program and battery charge status. Some toothbrushes with this feature can even assess the overall effectiveness of each brushing session, process this data within the app (like tracking trends over time), and sometimes transmit this information over the internet, allowing for remote consultations with a dentist.

While in the past, the primary drawback of models offering smartphone synchronization was their high price, nowadays, even low-cost-friendly toothbrushes come with this feature. Additionally, some models go the extra mile by including dedicated smartphone holders for added convenience.

The time required to charge the battery from zero to 100% in a device with the appropriate power type (see above). This parameter can vary from 1 – 3 hours in relatively simple and low-power devices to a day in advanced models with capacious batteries. At the same time, the longer the maximum operating time on a charge (see above), the longer, usually, the time required for charging, although there is no hard dependence here.

In general, having fast charging capabilities improves the convenience of a device by reducing interruptions in its operation. However, there is a trade-off to consider: fast charging often means either a smaller battery capacity or a higher price due to the use of specialized technologies to speed up the charging process. When evaluating this parameter, it's essential to think about how you intend to use the device. For instance, if a toothbrush or irrigator is solely used at home by one person and comes with a charging stand, fast charging may not be a critical factor. The device remains consistently charged as it's constantly on the charger, and its battery doesn't deplete significantly during one use. The time between sessions, usually around 8 to 12 hours, is more than enough to maintain a charged battery, even for devices with slower charging. However, if you plan to use the device while traveling, where access to power outlets is sporadic, it's preferable to have...minimal charging time to ensure you can recharge quickly during your trips.

The total weight of the device is an important consideration. In the case of stationary irrigators and dental centers (as mentioned in the "Type" section), weight isn't a significant factor since the main unit is placed on a stand or wall, and you don't have to hold it. In fact, for some of these models, weight may not even be specified. However, when it comes to toothbrushes or portable irrigators, the device's weight becomes a crucial factor. A heavy device can strain your hand and make it challenging to use during teeth brushing or other procedures. It's generally recommended that the weight of a portable device should not exceed 200 g, and lighter is often better. It's worth noting that in models that come with stands (as discussed earlier), the total weight is typically provided, accounting for both the main unit and the stand. The weight of the main unit alone is usually around 1.5 to 2 times less than the total weight.