Укр|Eng|Рус
Ukraine
Catalog   /   Automotive   /   Parts & Car Electronics   /   Chargers & Jump Starters

Comparison Pulso BC-12610 vs Pulso BC-12245

Add to comparison
Pulso BC-12610
Pulso BC-12245
Pulso BC-12610Pulso BC-12245
Compare prices 22Compare prices 20
User reviews
TOP sellers
Devicechargercharger
Typeinverterinverter
Specs
Battery compatibility
WET/EFB (Lead-Acid)
AGM
GEL
WET/EFB (Lead-Acid)
 
 
Battery voltage
6 V
12 V
 
 
12 V
24 V
Max. charging current10 A15 A
Current adjustmentstepless adjustmentstepless adjustment
Battery capacity 12V5 – 120 Ah10 – 190 Ah
Features
ammeter
charging indicator
ammeter
charging indicator
General
Compartment for cables
Power source230 V230 V
Weight2.5 kg
Added to E-Catalogjune 2017october 2016

Battery compatibility

The parameter determines compatibility with batteries, that is, with what types of batteries a charger or start-charger or a car booster can be used. Incorrect charger operation mode promises overcharging of the battery, its swelling and failure.

WET / EFB (Lead-Acid). The abbreviation WET is used to designate traditional lead-acid batteries with a liquid electrolyte. EFB (Enhanced Flooded Battery) is their improved subtype with thicker pure lead plates and a positive electrode in a special microfiber envelope. Both transformer devices and most impulse batteries are suitable for charging acid batteries.

AGM. In the design of AGM batteries, the electrolyte is in an absorbed state: the compartments of such a battery are filled with porous fiberglass material, which contains acid. This type of battery is particularly sensitive to overcharging - it is necessary to select a suitable charger with a certain set of automatic functions for it.

gel. In gel batteries, the electrolyte is brought to a jelly-like state with the help of special thickeners. The key to choosing the right GEL battery charger is the ability to vary the amount of charging current depending on how badly the battery is discharged.

LifePO4. Lithium iron phosphate batteries are charged with cons...tant voltage and current. As the voltage in the battery approaches the maximum value, the charge current should decrease, and after the end of the charging process, its supply should stop completely. To keep LiFePO4 batteries in good shape, devices with appropriate automatic functions are suitable.

Li-Ion. Lithium-ion Li-Ion batteries are charged in the same way as lithium-iron-phosphate counterparts. For them, you will need to pick up an automatic device with the ability to supply constant voltage and current.

Battery voltage

The nominal voltage of the batteries that the device can work with. For boosters (see "Type"), in this case, the voltage that the "starter" can output at the output in the engine start mode is indicated.

- 6 V. Voltage found in some motorcycles, scooters, ATVs and similar vehicles.

- 12 V. Standard voltage of batteries (and on-board networks) for passenger cars, as well as light trucks and minibuses.

- 24 V. Voltage used mainly in trucks, buses and other heavy equipment. Also found in some heavy SUVs.

Max. charging current

The highest current that the charger can provide in charging mode. For models with one current adjustment (see below), its value is also indicated in this paragraph.

Different battery models may differ in charging parameters, including over the optimum current range. Accordingly, it is worth choosing a charger in such a way that it matches this range. Detailed selection recommendations can be found in special sources — in particular, documentation for batteries.

Battery capacity 12V

The capacity of batteries with an operating voltage of 12 V, for which a starter charger can be used. As a rule, modern units are not designed for one specific value, but for a range of capacities, which greatly facilitates the search filter according to the required parameters.

Note that although the discrepancy between the rechargeable battery in terms of capacity is not as critical as in terms of current or voltage, this does not mean that this parameter should not be paid attention to. Both too capacious and too “small” a battery will cause the charger to work in an off-design mode, which is harmful to both the “charger” and the battery, and can even lead to accidents.

Compartment for cables

The presence in the body of the device of a special compartment for cables. When not in use, cables can be rolled up and hidden in this compartment, making the device more compact and easy to store and transport. And also allows not to lose components.
Price graph
Pulso BC-12610 often compared