Укр|Eng|Рус
Ukraine
Catalog   /   Tools & Gardening   /   Hand Tools   /   Bits & Sockets Sets

Comparison Intertool VT-1048 vs Intertool VT-1026

Add to comparison
Intertool VT-1048
Intertool VT-1026
Intertool VT-1048Intertool VT-1026
Compare prices 2Compare prices 17
TOP sellers
Total number of items4826
In box
SL bits (Slot)55
SL bits sizesSL3, SL4, SL5, SL6, SL7SL3, SL4, SL5, SL6, SL7
PH cross bits (Phillips)84
PH bits sizesPH0, PH1x2, PH2x3, PH3x2PH0, PH1, PH2, PH3
PZ cross bits (Pozidriv)83
PZ bits sizesPZ0, PZ1x2, PZ2x3, PZ3x2PZ1, PZ2, PZ3
T bits (Torx)76
T bits sizesT10, T15, T20, T25, T27, T30, T40
H bits (Hex, Allen)8
H, HH bits sizesH1.5, H2, H2.5, H3, H4, H5, H5.5, H6
Bit lengthдо 40 mmup to 70 mm
Socket heads (6 points)96
Socket heads sizes (6 points)4 – 12 mm5 – 10 mm
Socket depthstandardstandard
Ratchet wrench
Screwdriver handleratchetratchet
Tool storagecasecase
Weight750 g667 g
Added to E-Catalogjanuary 2015january 2015

Total number of items

The total number of items in the set. In this case, both the actual bits and end heads are taken into account, as well as additional accessories such as an adapter, a bit holder, etc.

The more items in the set, the wider its possibilities. However, note that the specific composition of the kit may be different, so when buying it is worth specifying not only the number of items, but also their specific types.

PH cross bits (Phillips)

The total number of bits of type PH supplied in the set.

The PH marking stands for a classic cross-shaped tip without additional tricks. These bits have a larger area of contact with fasteners than flat SL bits and allow you to work at higher torques. At the same time, when the load increases to a certain level, such a tip pops out of the slot. In some situations, this is an advantage, because avoids damage to the tip and fasteners due to too much force; however, other types of tips, such as PZ, are better for working at maximum forces (see the relevant paragraph).

PH bits sizes

The sizes of the PH type bits included in the set and the number of bits of each size.

For the bits themselves, see above. The size in this case is indicated by a conditional number; the larger the number, the larger the slot for which the nozzle is designed. If there is more than one bit, the number of bits is specified after the size. For example, the entry "PH1, PH2x2" means one relatively small bit and two larger ones. And there are also very small sizes PH0, PH00 and even PH000. Such bits, due to their tiny size, are appropriate for repairing phones, watches, cameras and other small electronics.

PZ cross bits (Pozidriv)

The total number of PZ type bits supplied in the set.

The PZ is a modified version of the PH cross tip (see the relevant paragraph). In PZ tips, the angles are more pronounced, there are additional edges to increase the contact area with the slot — thanks to this, unlike PH, these tips do not push out of the slot even with a very large effort. All this makes the PZ a fairly convenient option for working at high loads, including uneven — in particular, for tightening self-tapping screws.

PZ bits sizes

The sizes of the PZ type bits included in the set and the number of bits of each size.

For the bits themselves, see above. The size in this case is indicated by a conditional number; the larger the number, the larger the slot for which the nozzle is designed. If there is more than one bit, the number of bits is specified after the size. For example, the entry "PZ1, PZ2x2" means one relatively small bit and two larger ones.

T bits (Torx)

The total number of Torx bits supplied in the set.

The Torx tip has the shape of a six-pointed star. This provides a larger area of contact with the fastener than flat and cross bits, and allows you to work with higher forces.

T bits sizes

Sizes of the Torx type bits included in the set and the number of bits of each size.

For the bits themselves, see above. The size in this case is indicated by a conditional number; the larger the number, the larger the slot for which the nozzle is designed. The specific size to which this or that number corresponds can be clarified according to special tables. If there is more than one bit, the number of bits is specified after the size. For example, the entry "T7, T8x2" means one bit of T7 and two of T8.

H bits (Hex, Allen)

The total number of Hex bits supplied in the set.

The Hex tip has the shape of a regular hexagon. Fasteners of this type are easy to use due to the large size of the slot — this makes it easier to get into it with a nozzle. And the nozzles themselves are somewhat inferior to the Torx “stars” in terms of the contact area with the slot, but they are noticeably superior to the cross nozzles.

H, HH bits sizes

The sizes of the Hex bits included in the set, and the number of bits of each size.

For the bits themselves, see above. The size is indicated by a number indicating the width in millimetres — for example, H2.5 or H4. If there are several bits of the same size, their number may be specified after the size, but in the case of Hex-bits this is extremely rare, they are usually supplied one of each size.
Price graph