Charging mount
The method of fixing, provided by the design of the wireless car charger (see "Type").
The main methods of such fixation are
suction cup,
car air vent grill and
adhesive surface. Some devices combine several options at once — for example, a suction cup and air vent clip. At the same time, in some models, different types of fasteners are initially included in the kit, in others, the method of fixation depends on the modification; these nuances should be clarified when choosing. As for the features of each of the individual types of mounts, they are as follows:
— Suction cup. The suction cup allows you to mount the device on a dashboard, windscreen or any other relatively flat surface. At the same time, unlike a sticker, such a mount is reusable. On the other hand, suction cups are generally less reliable, and on rough and textured surfaces they stick poorly, if not at all. Thus, such mounts are often provided as an addition to mounting on an air vent grill (or as one of the alternative options for a complete mount, along with a clothespin).
— Car air vent grill. The most popular method of mounting wireless car chargers is widely used both individually and in combination with other options. This is because those pins are simple and, at the same time, very reliable; moreover, they can be used an unlimited number of times; air vents are on a
...lmost any dashboard, and they are usually located conveniently enough for using wireless car chargers.
— Adhesive surface. Fastening with a special adhesive pad is similar to installation on double-sided tape (only in this case, the “adhesive tape” is initially attached to the device body, and before installation, it is enough to remove the protective film on the adhesive surface). This type of attachment is suitable for both completely smooth and embossed surfaces, it is stronger than suction cups, but it is disposable — it is not easy to remove the installed device, and the fastener itself usually does not require reuse. Therefore, such clamps are rarely used in their pure form — most often they are provided as a spare (or alternative) option for mounting on the grill.Features
—
Operation indicator. In some models it also provides additional information about operating modes, malfunctions, etc. Most often, such a light indicator is in the form of a separate light or a clearly visible backlight system. And additional information can be provided by changing the colour of the backlight, by blinking, etc. However, even without these features, the operation indicator provides additional convenience in use. In particular, it allows you to determine whether the charger is receiving power and working normally — this can be useful when diagnosing various problems. It is also possible to use non-standard backlighting — for example, as a night light that makes it easier to navigate in an unlit room (especially since gadgets are often put on charge just at night).
—
Display. Own display on the charger case. This is usually the simplest screen with a few characters, but it is enough to display various additional information that makes life easier for the user: current voltage and current values, fast charging status, error codes, etc. On the other hand, this complicates the design, but in fact such information is required less often; Therefore, very few chargers with displays are produced.
— Detachable charger power cable. Cable for connecting the charger to the power source, which has a removable design. By itself, connecting to a power outlet using a separate wire (b
...oth removable and non-removable) is rarely used in charger devices — mainly in devices for which the “plug on the case” type design is not suitable (this is primarily wireless models, as well as wired charger devices with an abundance of connectors and corresponding dimensions). Specifically, the removable design is convenient in two ways: firstly, the wire can be removed and compactly folded for storage and transportation, and secondly, if the cable is damaged, it can simply be replaced, no need to bother with repairs. The disadvantages include an increased probability of losing the cable, as well as a slightly lower reliability than with a non-removable design (the latter, however, becomes noticeable only with frequent connections/disconnections that wear out the connector).
— Non-detachable charger power cable. Cable for connecting the charger to the power source, rigidly fixed to the device and not intended to be disconnected. It occurs much less frequently than the removable one described above, since it is less convenient if necessary to compactly fold the device; and if the wire is damaged, most likely, you will have to carry the charger to a service centre. On the other hand, you can lose such a wire only together with the charger itself.Cable length
The length of the cable supplied with or included with the charger. For wireless models, the length of the power cable of the charger itself is indicated here, for wired models, the length of the cord for charging gadgets
Anyway, a longer cable gives more freedom of movement, but it creates inconvenience for short distances. Also note that charging is supposed to be used in the immediate vicinity of sockets, so wires longer than 2 m are practically not found among such devices. A length of
more than 1.5 m is considered significant, from 1 to 1.5 m — medium, from 0.5 to 1 m — small, and in some models there are wires shorter than 0.5 m.
