Comparison Doogee R10 128 GB vs Doogee T30 Pro 256 GB

— Display diagonal. Size screen dimensions; traditionally indicated in ". Larger screens are easy to view and easy to touch. On the other hand, this parameter directly affects the dimensions, power consumption and price of the entire tablet (the increase in cost is often also due to the fact that a larger screen also requires a higher resolution). Rare birds from the family of modern tablets have 7-" screens; many of them look like slightly enlarged smartphones. Sizes of 8 " and 9 " can be considered basic. 10-" and 11-" diagonals are quite large for a consumer-class tablet; and screens of 12", 13", 14" and more are typical mainly for professional-level models.

– Resolution. Screen resolution on a tablet is the dimensions of the sensor in dots (pixels) horizontally and vertically. Based on this parameter, screens in modern tablets are conventionally divided into three categories: HD, Full HD, 2K and higher. The higher the display resolution, the clearer, more detailed and smoother the image it can reproduce. High resolution is especially important for large diagonal displays. At the...same time, it significantly affects the cost - both due to the high price of the screens themselves and due to the increased requirements for system performance.

— PPI. An abbreviation for "points per inch," i.e., "pixels per inch". This setting determines how many pixels are on a 1-" (2.54 cm) line drawn horizontally or vertically across the screen; it directly depends on the resolution and dimensions of the display. In general, the higher the PPI value, the clearer, smoother and, accordingly, the higher quality the picture on the screen will be. And at a certain pixel density, the human eye generally ceases to distinguish individual points, perceiving a completely smoothed image.

— Matrix type. The technology used to make the tablet PC display. Today the following types of matrices are used:

• — TN-Film(Twisted Nematic+Film). The oldest modern technology for manufacturing liquid crystal screens. Such matrices are characterized by a short response time, but have small viewing angles and provide relatively low image quality. For some time they were quite popular due to their low cost, but today they have practically disappeared from the scene due to the development and reduction in cost of more advanced technologies.
• — IPS(In Plane Switching). Such matrices are characterized by excellent color rendering and wide viewing angles in all viewing planes. Initially, they had a fairly long response time and were expensive, but technology does not stand still - improved versions of IPS are “faster” and inexpensive. Thanks to this, this type of sensor is found in all types of tablets, even among budget-class devices.
• — PLS(Plane to Line Switching). A type of sensor developed by Samsung engineers as an inexpensive and higher quality alternative to the original IPS, with increased brightness and contrast. For a number of reasons, it is used primarily in devices in the middle and higher price ranges.
• — LTPS(Low Temperature Poly Silicon). Technology for producing TFT displays using silicon. Indicators of brightness, contrast and viewing angles are at the level of screens made on the basis of IPS. A key feature of this technology is the ability to embed control electronics directly into the screen, but at the same time these displays remain light and thin. This technology is quite expensive to produce, but due to the fact that there is no need to use additional chips to control the image, the price of the end devices is at an acceptable level.
• — MVA. Abbreviation for "Multi-domain Vertical Alignment". One of the most popular types of VA technology today. It is a kind of transitional option between TN-film and IPS (see above), combining a number of advantages of both types. On the one hand, MVA matrices provide fairly high-quality color reproduction and deep blacks, on the other hand, their response time is not much lower than in TN-film. At the same time, such screens are not without drawbacks: when viewed strictly perpendicularly, the shades of black can be “blurred” and merge, and the color balance as a whole significantly depends on the viewing angle. It is not widely used on tablets.
• - AMOLED. An abbreviation for “Active Matrix Organic Light Emitting Diode,” that is, an active sensor based on organic light-emitting diodes. Unlike most other types of screens, the AMOLED sensor is itself a light source and does not require a separate backlight, which significantly reduces energy consumption. Moreover, such screens are characterized by high quality contrast and color reproduction, and the image on them is clearly visible even in bright external lighting. The main disadvantages of AMOLED are the complexity of production (as a consequence - high price), as well as the tendency to uneven wear ("burnout") of pixels during prolonged operation at high brightness, which can disrupt color rendition. On the other hand, it is very difficult to bring the display to such wear and tear, and AMOLED sensor manufacturers are constantly working on new modifications of the technology designed to eliminate these shortcomings.
• - Super AMOLED. A modified and improved version of AMOLED technology created by Samsung; LG produces such screens under the Ultra AMOLED brand. One of the key improvements to this technology is that in Super AMOLED screens the touch layer is built directly into the display (rather than being made separate). This had a positive effect both on the quality of color reproduction and image brightness, as well as on the accuracy and speed of the sensors. In addition, this type of screen is 20% brighter than original AMOLED, has 80% less glare and consumes 20% less energy.
• — Super Clear TFT. A technology created by Samsung together with Sony as an alternative to Super AMOLED displays (the demand for which was so high that manufacturers simply did not have enough capacity to produce the required quantity). Created on the basis of the usual TFT with some improvements and additions; In terms of image quality, Super AMOLED is somewhat inferior, but not by much, but the production of Super Clear TFT is much cheaper and easier.
• — OLED. Various types of matrices based on organic light-emitting diodes. In terms of features such as color rendering, contrast, power consumption, such screens are similar to the AMOLED ones described above; differences may lie in small details of technology. In general, OLED displays are quite advanced, they are found mainly in high-end tablet models. The main disadvantages of OLED screens are their high price (which, however, is constantly decreasing as the technology develops and improves), as well as the susceptibility of organic pixels to burn out when broadcasting static images or pictures with static elements (notification panel, on-screen buttons, etc.) for a long time. ).

— Sweep frequency. The maximum refresh rate of the display, in other words, the highest frame rate that it can effectively reproduce. The higher this indicator, the smoother and smoother the image is, the less noticeable the “slideshow effect” and blurring of objects when moving on the screen. At the same time, it is worth considering that a refresh rate of 60 Hz, supported by almost any modern tablet, is quite sufficient for most tasks; Even high-definition videos hardly use high frame rates these days. However, high refresh rates - 90 Hz, 120 Hz, 144 Hz - can be useful in games and some other tasks; it also improves the overall experience of the OS interface and applications - moving elements in such interfaces move as smoothly as possible and without blurring.

– HDR. Technology that allows you to expand the dynamic range of the screen. In this case, we mean a range of brightness - simply put, the presence of HDR allows the screen to display brighter whites and darker blacks than on displays without support for this technology. In practice, this gives a noticeable increase in picture quality: the saturation and fidelity of the rendition of various colors improves, and details in very light or very dark areas of the frame do not “drown” in white or black. However, all these advantages become noticeable only if the content being played is originally recorded in HDR. Nowadays, several varieties of this technology are used, here are their features:

• HDR10. Historically the first of the consumer HDR formats, it is extremely popular today: in particular, it is supported by almost all streaming services with HDR content and is standardly used for such content on Blu-ray discs. Provides 10-bits color depth (more than a billion shades). At the same time, on devices with this technology, you can also play HDR10+ format content (see below) - except that its quality will be limited by the capabilities of the original HDR10.
• HDR10+. Improved version of HDR10. With the same color depth (10 bits), it uses so-called dynamic metadata, which allows you to transmit information about the color depth not only for groups of several frames, but also for individual frames. Thanks to this, an additional improvement in color rendering is achieved.
• Dolby Vision. An advanced standard used particularly in professional cinematography. It allows you to achieve a color depth of 12 bits (almost 69 billion shades), uses the dynamic metadata mentioned above, and also makes it possible to transmit two image options at once in one video stream - HDR and regular (SDR). At the same time, Dolby Vision is based on the same technology as HDR10, so in modern electronics this format is often combined with HDR10 or HDR10+.

— Gorilla Glass. Special tempered glass used to cover displays in modern gadgets, including tablets. It is characterized by increased resistance to scratches and impacts; but the specific properties of the Gorilla Glass coating depend on its version. This parameter can also be specified in the tablet's specifications; Here are the most current versions for today:

• Gorilla Glass v3. Released in 2013, but still found in modern devices. This is primarily due to its outstanding scratch resistance: according to this indicator, the third version of the “gorilla” remained unsurpassed right up to 2020 (and Gorilla Glass Victus, which took the lead, is still practically not used in tablets).
• Gorilla Glass v4. Coating created in 2014. The main emphasis during development was on impact resistance, due to which this indicator, compared to the previous version, doubled (with a glass thickness of only 0.4 mm). But the scratch resistance has decreased somewhat.
• Gorilla Glass v5. Version introduced in 2016. Impact resistance, compared to its predecessor, has increased by 1.8 times, due to which such glass remains intact in 100% of cases of a fall from a height of 1.2 m (on a flat hard surface) and in 80% of cases of a fall from a height of 1.6 m. Scratch resistance has also improved somewhat, but this material still does not reach the performance levels of v3.
• Gorilla Glass v6. 2018 version with a focus on improving impact resistance. Twice stronger than version 5, guaranteed to withstand single drops from a height of 1.6 m and multiple drops (up to 15 times in a row) from a height of 1 m.
• Gorilla Glass Victus. After v3, this is the first version of Gorilla Glass where the creators paid as much attention to scratch resistance as shock protection. Victus glass debuted in 2020. Shock resistance for it is declared at the level of 2 m for a single fall and 1 m for multiple falls (up to 20 times in a row).
• Gorilla Glass Victus+. An improved modification of Gorilla Glass Victus, released in 2022. Close to ceramics in terms of scratch resistance. Thus, according to the Mohs mineral scale of hardness, glass begins to scratch at level 7/10, while the original Victus version scratches at level 6/10.

The maximum brightness in nits provided by the tablet screen.

The brighter the display, the more readable the picture remains on it under intense ambient light. Also, high brightness is important for the correct display of HDR content. However, a large margin for this indicator affects the cost and power consumption of the screen. Manufacturers can specify standard, maximum, and peak brightness values. At the same time, an equal sign cannot be put between the maximum and peak brightness. The first indicates the ability of the screen to produce the specified brightness over its entire area, while the peak one - in a limited area and for a short time (mainly for HDR content).

This parameter shows how much of the tablet's front panel area is on the display. The higher the display/body ratio, the thinner the frames and the more compact the tablet (with the same diagonal), the more elegant and aesthetically pleasing it looks. This indicator is also important when holding the tablet with both hands at once (for example, in games): thin frames or even frameless models allow you to reach further with your fingers without removing your hands from the device.

The volume of the tablet's own built-in storage. The larger it is, the more information (programs, games, movies, photos, etc.) can be stored on the tablet without resorting to removable media, rewriting to other devices, etc. At the same time, the amount of built-in memory significantly affects the cost. Therefore, some models are available in several versions, differing only in the capacity of the drive. And the variety of built-in memory is quite wide: from 16 GB to 1024 GB with a 2-fold increase ( 32 GB, 64 GB, 128 GB, 256 GB, 512 GB).

Note that this paragraph indicates the total amount of internal memory. The operating system and default programs also take up space in it; therefore, the volume of the drive actually available to the user will inevitably be less than the total.

Many tablets allow you to add memory cards to the built-in drive (see below). Such cards are relatively inexpensive, but they are much slower, and the ability to work with them may be limited by the manufacturer — for example, not all tablets with this function allow installing applications on removable media.

Wi-Fi is a must for modern tablets. This interface can be used both for connecting to local networks or the Internet (via a home router, public access point, etc.), and for direct communication with other devices (for example, remote control of a camera or broadcasting video to a TV). And tablets with 3G/LTE modules (or with the ability to connect an external cellular USB modem) can also work as an access point, “distributing” mobile Internet to other devices with Wi-Fi.

The Wi-Fi standard primarily determines the maximum data transfer speed (the actual speed is usually much lower). The most modest of the current Wi-Fi 3 standards (802.11g) provides speeds of up to 54 Mbit/s, but it is considered outdated and is extremely rare as the main one. Wi-Fi 4 (802.11n) with speeds of up to 300 Mbit/s, and Wi-Fi 5 (802.11ac)(up to 6.77 Gbit/s) have become much more widespread. Devices supporting Wi-Fi 6 (802.11ax) and Wi-Fi 6E are also gaining popularity, where connection speeds already reach 10 Gbps, and a number of solutions have been introduced to optimize the simultaneous operation of several devices on one router.

The latest version for 2024 is 802.11be - Wi-Fi 7. The technology, like the previous Wi-Fi 6E, is capable of operating in three frequency ranges: 2.4 GHz, 5 GHz and 6 GHz. At the same time, the maximum bandwi...dth in Wi-Fi 7 was increased from 160 MHz to 320 MHz - the wider the channel, the more data it can transmit. The IEEE 802.11be standard uses 4096-QAM modulation, which also allows more symbols to be accommodated in a data transmission unit. From Wi-Fi 7 you can squeeze out a maximum theoretical information exchange speed of up to 46 Gbps. In the context of using wireless connections for streaming and video games, the implemented MLO (Multi-Link Operation) development seems very interesting. With its help, you can aggregate several channels in different ranges, which significantly reduces delays in data transmission and ensures low and stable ping. And Multi-RU (Multiple Resource Unit) technology is designed to minimize communication delays when there are many connected client devices.

Separately, we note that, in addition to the directly specified Wi-Fi standard, modern tablets usually support a number of earlier versions. The same principle is used in most Wi-Fi equipment, so, as a rule, there are no problems with version compatibility.

Bluetooth version supported by the tablet.

Bluetooth itself is a technology for direct wireless communication between various electronic devices. It can be used for various purposes, in particular, exchanging files with another Bluetooth device (laptop, mobile phone), connecting wireless headphones and headsets, peripheral devices (keyboards, mice), etc. The Bluetooth connection does not require both devices to be in line of sight and is stable as they move within range. The range and additional features depend on the connection version:

• 2.0. The earliest of the Bluetooth variations used in today's tablets. Provides a data transfer rate of about 2.1 Mbps.
• 2.1. This version differs from 2.0 in a number of improvements: enhanced security, reduced power consumption and compatibility with NFC technology.
• 3.0. This version is a combination of a Bluetooth 2.1 module and a high-speed add-on that allows you to transfer data at speeds up to 24 Mbps. Thanks to this, the connection is able to automatically adapt to the situation: for small amounts of data, a slow channel is used that does not consume much energy, and for large volumes, the high-speed part is used.
• 4.0. June 2010 version. It is notable for the fact that it combines three protocols: classic, high-speed and BLE (low power consumption). The latter is the most economical at the time of release - the power consumption is so low that the CR2032 "tablet" batteries...last for several years of operation. The data transfer rate via the BLE protocol is up to 1 Mbps. According to the classical and high-speed protocol, Bluetooth 4.0 is almost the same as version 3.0 (see above).
• 4.1. Development of the version 4.0 described above. One of the key improvements was the optimization of collaboration with LTE cellular modules in order to avoid mutual interference. In addition, it became possible to operate Bluetooth devices simultaneously in several roles (for example, to broadcast audio to a headset and remotely control another device).
• 4.2. The next, after 4.1, is a key update to the Bluetooth standard. Introduced a number of key innovations for working in the "Internet of Things" (Internet of Things), as well as general improvements in speed and noise immunity.
• 5.0. Bluetooth version 5.0, introduced in 2016. In general, it continued the trend set by the 4.2 standard, has even more extensive opportunities for working with the Internet of Things. In particular, in the Bluetooth Low Energy protocol (see "4.0" above), it became possible to double the data transfer rate (up to 2 Mbps) at the cost of reducing the range, as well as quadruple the range at the cost of reducing the speed; in addition, a number of improvements have been introduced regarding simultaneous operation with a large number of connected devices.
• Bluetooth v 5.1. Update of the version described above v 5.0. In addition to general improvements in the quality and reliability of communication, this update has implemented such an interesting feature as determining the direction from which the Bluetooth signal is coming. Thanks to this, it becomes possible to determine the location of connected devices with an accuracy of a centimeter, which can be useful when searching for various accessories - for example, Bluetooth headphones or a wireless gamepad.
• Bluetooth v 5.2. The next, after 5.1, is the Bluetooth 5th generation update. The main innovations in this version are a number of security improvements, additional power optimization in LE mode, and a new audio signal format for synchronized parallel playback on multiple devices.
• Bluetooth v 5.3. The Bluetooth v 5.3 wireless protocol was introduced at the dawn of 2022. Among the innovations, it accelerated the process of negotiating the communication channel between the controller and the device, implemented the function of quickly switching between the state of operation in a small duty cycle and high-speed mode, improved the throughput and stability of the connection by reducing the susceptibility to interference. In case of unexpected interference in the Low Energy mode of operation, the procedure for selecting a communication channel for switching is now accelerated. There are no fundamental innovations in protocol 5.3, but a number of qualitative improvements are seen in it.

A sensor that allows you to determine the direction to the cardinal points. Uses the earth's magnetic field, like a conventional mechanical compass, so the accuracy of the readings can be quite low. However, tablets are rarely used for high-precision compass navigation, and this disadvantage is not critical.

— The number of lenses. The characteristics of the main (rear) camera of the tablet are represented primarily by the number of modules, which in most cases are 1, but there are also tablets with a dual camera.

— Resolution. The second important factor of the camera is the number of megapixels. Many really believe that the more MP, the better the quality of filming. However, this is not entirely true: only the maximum resolution of the resulting images depends on the resolution of the matrix, and their quality is determined by many other parameters. However a large sensor resolution may be a sign of an advanced camera, but this is not necessary — two "eyes" with the same number of megapixels can radically differ in the quality of shooting. Rear cameras in tablets may well be used for photo and video shooting; therefore, they have cameras of 8 MP, 10 MP and even higher (12 and 13 MP).

— Autofocus. For focus in such cameras, a movable lens system controlled by automation is responsible. It takes some time for the automation to work, and the lenses themselves turn out to be more complicated and more expensive than optics with a fixed focus (fixed lenses that are initially set to a large range of distances). However, the quality of the pictures i...s disproportionately higher than that of cameras without autofocus, and the systems themselves are constantly being improved, and their response time is increasingly approaching instantaneous.

— Flash. Flash significantly expands the capabilities of the camera. First of all, it allows you to shoot in low light conditions; in this case, the backlight, usually, can also be used in the constant glow mode — for video shooting. The second situation where a flash can come in handy is backlighting when the subject is in shadow. In addition, in many tablets, the flash LED can also be used as a regular flashlight, without a camera.

Resolution of the front camera of the tablet.

There is an opinion that more megapixels means better quality of filming. However, this is not entirely true: only the maximum resolution of the resulting images depends on the resolution of the matrix, and their quality is determined by many other parameters. However a large sensor resolution may be a sign of an advanced camera, but this is not necessary — two "eyes" with the same number of megapixels can radically differ in the quality of shooting.

The main purpose of frontcameras in tablets is video communication, and for it high resolution is not critical. Therefore, the number of megapixels in such cameras is noticeably lower than in rear cameras — for example, 2 MP considered an acceptable value, 5 MP is not bad, 7 MP and 8 MP is good, 12MP — excellent.