Укр|Eng|Рус
Ukraine
Catalog   /   Sound & Hi-Fi   /   Hi-Fi & Hi-End Components   /   AV Receivers

Comparison Denon AVR-X1700H DAB vs Onkyo TX-NR696

Add to comparison
Denon AVR-X1700H DAB
Onkyo TX-NR696
Denon AVR-X1700H DABOnkyo TX-NR696
Compare prices 2Compare prices 10
TOP sellers
Main
The microphone output for setting up the receiver is located on the front panel. Upscaling up to 8K.
Support for Google Assistant, Siri. Built-in Chromecast technology.
Device typeAV ReceiverAV Receiver
CPU
DAC frequency384 kHz
Audio DAC
32 bit /AccuEQ Room/
Auto sound calibration
Auto level
Surround sound in headphones
eARC
Ultra HD8K4K
UpscalingUltra HD (8K)Ultra HD (4K)
HDRHDR10 Plus, Dolby VisionHDR10, Dolby Vision
3D
Multi Zone
Tech specs
Number of channels7.27.2
Power per channel
120 W /при 6 Ом/
175 W
Signal to noise ratio98 dB
106 dB /Line, 80 дБ — Phono/
Acceptable acoustic impedance4 Ohm4 Ohm
Frequency range10 – 100000 Hz10 – 100000 Hz
Media player and tuner
Tuner and playback
AM/FM radio
USB drive
network streaming audio
internet radio
AM/FM radio
USB drive
network streaming audio
 
Streaming services
Spotify
 
Deezer
TIDAL
Spotify
Amazon Music
Deezer
TIDAL
Playable formatsWMA, MP3, WAV, MPEG-4 AAC, FLAC, Apple Lossless, DSDDSD; FLAC, WAV, AIFF, ALAC
Communications (interface)
Interfaces
AirPlay 2
 
Wi-Fi
Bluetooth
LAN
DLNA
roon tested
Amazon Alexa / Google Assistant / Apple Siri
AirPlay 2
Chromecast
Wi-Fi
Bluetooth
LAN
 
roon tested
Google Assistant
Decoder support
Decoders
Dolby Atmos
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS Express
DTS 96/24
DTS-HD Master Audio
DTS ES Matrix 6.1
DTS ES Discrete 6.1
DTS Neural:X
DTS X
Dolby Atmos
 
 
Dolby TrueHD
 
 
 
DTS-HD Master Audio
 
 
DTS Neural:X
DTS X
Inputs
RCA2 pairs4 pairs
Coaxial S/P-DIF1 шт1 шт
Optical2 шт1 шт
HDMI6 шт6 шт
HDMI versionv 2.1
Composite2 шт
Phono
Outputs
RCA1 pairs
HDMI1 шт2 шт
Composite1 шт
On headphones6.35 mm (Jack)
Preamplifier (Pre-Amp)
More featuresto the subwoofer
Front panel
Headphone output
USB port
HDMI input
Linear
General
Power consumption440 W570 W
Standby consumption0.1 W0.15 W
Learning remote control
Dimensions (WxDxH)434x339x151 mm435x380x174 mm
Weight8.5 kg10 kg
Color
Added to E-Catalogjuly 2022june 2019

DAC frequency

A digital-to-analogue converter (DAC) is an indispensable element of any system designed to reproduce digital sound. The DAC is an electronic module that translates sound information into pulses that are sent to the speakers. The technical features of such a conversion are such that the higher the sampling frequency, the better the signal at the output of the DAC, the less it is distorted during conversion. The most popular option in receivers today is 192 kHz — it corresponds to a very high sound quality (DVD-Audio) and at the same time avoids unnecessary increase in the cost of devices.

Audio DAC

Another indicator that determines the overall quality of the digital-to-analogue audio converter. For details on the converter, see "Audio DAC Sampling Rate"; here we note that the bit depth is standardly expressed in bits, and the higher it is, the more accurately the signal at the output of the DAC corresponds to the original signal and the less distortion is introduced into it. Today, it is believed that a 16-bit indicator provides quite acceptable signal quality, and 24-bit DACs are suitable even for premium-level equipment.

Auto level

This function automatically adjusts the volume level of the sound when it changes abruptly. Such a need is associated, for example, with the fact that one film can contain both dialogue and intense special effects; as a result, at low volume, conversations can sometimes be hard to hear, and at high volume, the sound can periodically “beat on the ears” and disturb others. In addition, while watching TV, many have probably come across commercials that sound noticeably louder than the main programme. Automatic level control boosts the volume at low audio levels and lowers it at high levels, thus helping to avoid the discomfort of too loud sound while maintaining normal hearing.

Surround sound in headphones

Possibility to simulate multi-channel (for example, 5.1) sound in traditional two-channel headphones. For this, a Dolby Headphone decoder is usually used, which processes the sound in such a way that the sound heard in the headphones is perceived as multi-channel — in particular, the intended position of its sources can be determined much more accurately. And considering that modern Hi-Fi class headphones are not inferior in sound quality to acoustics (and are significantly cheaper), this feature may well come in handy even for demanding audiophiles.

Ultra HD

The ability of the receiver to work with a video signal of ultra-high definition - Ultra HD. Various versions are available. The most popular are 4K and 8K. The resolution of such video is 4 and 8 times higher than that of Full HD, respectively, which allows you to achieve even greater image clarity and degree of detail (compared to FullHD). However, you will also need a 4K or 8K TV/projector to view it. And the cost of such systems (in particular 8K) can be expensive.

Upscaling

The ability to increase the resolution of the video signal processed by the receiver - if the original video resolution is lower. Depending on the capabilities of the receiver, in particular its HDMI ports, upscaling to Ultra HD 4K and upscaling to Ultra HD 8K may occur.

The principle of upscaling is that a relatively low-resolution video is supplemented with the required number of pixels using special algorithms. Due to this, when playing such a video, the quality of the “picture” is noticeably higher than without upscaling (although somewhat lower than that of content originally recorded in UltraHD). It makes sense to specifically look for a receiver with this function if you plan to use it with a 4K or 8K screen.

HDR

Receiver support for HDR technology; this clause may also specify the specific supported HDR format.

HDR stands for High Dynamic Range. This technology allows you to expand the range of brightness reproduced simultaneously on the screen; to put it simply, the viewer will see brighter whites and darker blacks. In practice, this means a significant improvement in color quality: colors are more vibrant and at the same time more faithful than without HDR. However, to use this function, in addition to the receiver, a TV/projector that supports the appropriate HDR format and content recorded in this format is required.

In terms of specific formats, the most popular options these days are basic HDR10, advanced HDR10+, and high-end Dolby Vision. Here are their features:

- HDR10. Historically the first of the consumer HDR formats, less advanced than the options described below but extremely widespread. In particular, HDR10 is supported by almost all streaming services that provide HDR content at all, and it is also common for Blu-ray discs. Allows you to work with a color depth of 10 bits (hence the name). At the same time, devices of this format are also compatible with content in HDR10 +, although its quality will be limited by the capabilities of the original HDR10.

- HDR10+. Improved version of HDR10. With the same color depth (10 bits), it uses the so-called dynamic met...adata, which allows transmitting information about the color depth not only for groups of several frames, but also for individual frames. This results in an additional improvement in color reproduction.

Dolby Vision. An advanced standard used particularly in professional cinematography. Allows you to achieve a color depth of 12 bits, uses the dynamic metadata described above, and also makes it possible to transmit two image options at once in one video stream - HDR and normal (SDR). At the same time, Dolby Vision is based on the same technology as HDR10, so in modern video technology this format is usually combined with HDR10 or HDR10+.

Power per channel

the maximum sound power that can be delivered by the power amplifier (if the receiver has one, see "Type") per speaker channel. It is worth noting here that in this case it is customary to indicate the so-called RMS (Rated Maximum Sinusoidal), or rated power. Rated is considered the highest power that the amplifier is guaranteed to be able to produce without interruption for an hour without any failures or breakdowns. Short-term jumps in the signal level can significantly exceed this value, but the main indicator is still the rated power.

The power of the amplifier largely determines the sound volume of the speaker system connected to the device. In fact, the loudness also depends on the characteristics of the speakers — sensitivity, impedance, etc.; however, other things being equal, the same acoustics on a more powerful amplifier will sound louder. In addition, this parameter also affects the compatibility of the speakers and the amplifier — it is believed that the difference in the nominal powers of these components should not exceed 10-15% (and ideally, the powers should generally match). And since different rooms require speakers of different power, this also affects the choice of amplifier for a particular environment; specific recommendations on the ratio of room characteristics and acoustic power can be found in special sources.

Also note that if the amplifier can operate with a load of different resistance (...see "Permissible acoustic impedance"), then for different options the power per channel will be different — the lower the resistance, the higher the power. In the characteristics, in this case, the maximum value of this parameter is usually indicated — that is, the power at the minimum allowable resistance.

Signal to noise ratio

This indicator determines the amount of extraneous noise that accompanies the sound output by the receiver's amplifier. It is convenient because it takes into account almost all possible significant noise — both created by the device itself and due to external causes. The higher the signal-to-noise ratio, the lower the noise volume compared to the main signal, the cleaner the amplifier will sound. A reading of 70-80 dB is considered normal for most consumer electronics, but in AV receivers, which are usually premium devices, this can only be called satisfactory. In the most advanced models, this figure can significantly exceed 100 dB.
Price graph
Denon AVR-X1700H DAB often compared
Onkyo TX-NR696 often compared