Comparison Arturia MiniFuse 1 vs Focusrite Scarlett Solo 3rd Gen

The number of input and output channels that the audio interface is equipped with. See below for more details on each type.

— Input channels. Input (in) channels on audio interfaces designate the number of different audio signals a device can accept for recording overnight. Their number plays a decisive role in multi-channel sound recording, connecting several instruments or vocals at the same time. When choosing an audio interface, consider not only the number of input channels, but also the types of connectors (see “Inputs”).

— Output channels. Output channels output (out) is the number of audio signals that can be sent to other devices or equipment for playback. The outputs of the audio interface can be used to connect to amplifiers, monitors, speaker systems, headphones, etc. A large number of output channels will come in handy when creating sound mixes, multi-channel recording or multitasking in a studio environment. For simpler tasks, it is enough to have from 2 to 4 output channels. When choosing an audio interface, consider not only the number of output channels, but also the types of connectors (see “Outputs”).

The audio frequency range supported by the device. Most often we are talking about the range of frequencies that a device can produce in an analog audio output signal.

In general, the wider the frequency range, the fuller the sound, the lower the likelihood that the audio interface will “cut off” the upper or lower frequencies. However, it must be taken into account that the human ear is capable of hearing sounds at frequencies from 16 to 22,000 Hz, and the upper limit decreases with age. So from a practical point of view, it makes no sense to provide a wider range in audio technology. And the impressive numbers found in high-end devices are rather a “side effect” of advanced electronic circuits and are given in the specifications mainly for advertising purposes. Also remember that the overall sound quality is affected by many other factors besides frequency range.

— Total audio inputs Jack / XLR. The total number of analog audio inputs such as Jack (6.35 mm) and/or XLR (this interface can be combined with a “jack”). Note that such connectors can play the role of both a line input and a microphone or instrument input. For more details, see the relevant paragraphs.

— mini-Jack. The standard 3.5 mm mini-Jack is usually used in audio interfaces as an analog (line) input for two stereo channels, as well as as a microphone audio input (see the corresponding paragraphs).

Connectors used to connect musical instruments (acoustic or bass guitars, keyboards, etc.). Most often they are made in the form of 6.35 mm Jack format sockets, but there are other options (see below). The audio signal from pickups has its own specific characteristics, so the instrument input typically features a higher input level and special impedance matching to ensure optimal sound quality.

— Jack (6.35 mm). Jack sockets (6.35 mm) are most widely used as instrument audio input. They are very large in size, thereby ensuring tighter contact, and support a balanced connection (for transmitting a high-quality signal without interference over fairly long wires). The number of Jack connectors (6.5 mm) usually corresponds to the number of tools that can be simultaneously connected to the device.

- XLR. A characteristic round connector, often combined with a Jack interface (6.5 mm). XLR is equipped with a locking lock and three contacts (there are other options in terms of quantity, but they are practically not found). The connector is used to transmit an analog signal through a balanced connection, which provides high immunity to interference - sufficient for professional use.

The type of line input provided in the device. Uses the line input to feed audio from an external source to the audio interface.

The following types of connectors can be used for line input:

— mini-Jack (3.5 mm). A socket for a standard mini-Jack plug (3.5 mm). The connector serves as an audio input for two stereo channels. It is designed primarily for portable electronics such as smartphones, pocket players, etc. In stationary devices, Jack (6.35 mm), XLR and RCA are more popular.

— Jack (6.35 mm). A common audio connector for transmitting an analog signal. In design, this type of socket is as similar as possible to a mini-Jack (3.5 mm), but differs in size. Jack connector (6.5 mm) provides tight contact and is less susceptible to interference. It also supports a balanced connection - high-quality transmission of audio signals over fairly long wires with effective protection against interference.

- XLR. The XLR standard is considered professional - not only because of the high quality of signal transmission, but also because of its fairly large size and the presence of locks for securely securing the plugs. However, only one channel of audio can be transmitted over one cable, so XLR outputs are usually installed in pairs - based on stereo sound. Also note that these connectors can be combined with Jack sockets (6.35 mm). They als...o allow you to implement a connection in a balanced format with a high degree of noise immunity and the use of fairly long wires without affecting the frequency of the analog signal.

- RCA. Connector for coaxial cable with tulip type plug. The standard RCA input consists of two jacks - for stereo sound, left and right channel. One analog RCA connector can only transmit one channel of audio, so the number of such connectors corresponds to the number of channels supported by the device.

Output connectors for connecting monitor speakers or headphones. Connecting monitors to the output of an audio interface allows musicians, sound designers, or sound engineers to monitor audio quality in real time. In audio interfaces, monitor outputs can be made in various formats, but most often there are various combinations of RCA, XLR and Jack connectors (6.35 mm), less often - the classic mini-Jack (3.5 mm).

Audio interfaces designed for recording podcasts and conducting live broadcasts on the Internet (streams). They are supposed to connect streamer and podcasting equipment such as microphones and headphones, and the functions in such models include fine sound adjustments, adjusting the balance between different audio sources, etc.

The Loopback function allows you to combine the signal from connected microphones, instruments and other line-level sources with background music, audio tracks and other sounds played on the connected equipment (usually a computer). Loopback will come in handy when recording virtual instruments, podcasts, streaming, etc.

Number and type of USB ports in the device. Most often, audio interfaces contain full-size USB A connectors, and their number can vary from 1 to 3 pcs. Such ports are being replaced in modern models by more compact USB type C, which allows the plug to be inserted in either direction. Somewhat less commonly, audio interfaces can be equipped with USB B ports, while desktop models can be equipped with microUSB connectors.