Drum volume
The internal volume of the drum of the washing machine.
A larger drum can accommodate more laundry, but there is no rigid dependence here: models with the same volume may differ in maximum capacity. It is because to process a large mass of laundry you need not only a capacious drum but also an engine of appropriate power. At the same time, it should be noted that in a larger drum, the same mass of laundry will be washed and dried more efficiently than in a small one. On the other hand, a volumetric drum takes up more space — the size of the device is largely determined by the size of the drum.
Water consumption per cycle
The volume of water used by the washing machine during a standard wash cycle. It is measured while washing the maximum amount of cotton underwear for this model with a normal programme and a temperature of 60 degrees.
When evaluating efficiency, one should consider not only the actual water consumption but also the maximum load. So, for example, a model with a load of 7 kg and a consumption of 49 litres per kilogram of laundry will be more economical than a model of 5 kg with a consumption of 40 litres: the first consumes 49/7 = 7 litres per 1 kg of laundry, the second 40/5 = 8 litres per kilogram. This moment is important, first of all, if a large amount of washing is expected.
Many modern automatic washing machines are equipped with intelligent systems that can adjust the water consumption to the actual load and avoid overspending.
Jet rinse
The presence of a jet rinse function in the machine. Such rinsing, by the name, is carried out by strong jets of water sprayed from special nozzles. It ensures higher efficiency than the traditional method and reduces water consumption and washing time.
Opening angle
Door opening angle in front-loading washing machines. The wider the hatch opens, the easier it is to load and remove laundry from the drum of the device. The most convenient option is
180° opening the door. In simpler models of washing machines, the hatch opens to a smaller angle (usually in the range from 120° to 180°).
Noise level (spin)
The maximum noise level produced by the machine during operation. Most often indicated for spinning — this is the noisiest mode of operation; for units without spinning (such as semiautomatic devices), this paragraph indicates the overall volume or the volume in the noisiest mode.
The
quieter the machine works, the more comfortable it is for others. This moment is especially critical if there are small children in the house. However, the decibel used to measure loudness is a non-linear unit, and the actual noise level is best estimated from comparative tables in special sources.
Dimensions (HxWxD)
General dimensions of the washing machine in height, width and depth.
The size of the unit determines not only the size of the space required for installation but also the ability to bring it into a particular room. At the same time, even a relatively small protruding part (like a door latch) can create problems with passing through a doorway. Therefore, in our catalogue, we try, if possible, to indicate exactly the maximum size of the machine — taking into account all the protruding parts. On the other hand, not all manufacturers provide such data. So if there is any doubt, it is worth evaluating the product by size with a certain margin. And specific information on how the dimensions were measured can usually be found in the manufacturer's documentation.
Finally, let's touch on the specifics of individual dimensions. So, in the case of front loaded machines, note that additional space in front inevitably will be required to open the door. Machines whose depth
does not exceed 40 cm are considered narrow. They can be a lifesaver in cramped conditions, especially if the design provides top loading. And a height of 120 cm or more is an almost unmistakable sign of
a machine with 2 drums which are located one above the other. It does not only increase capacity but also allows you to simultaneously wash two sets of things in different modes. The reverse side of these advantages is tradi
...tional — high cost.Country of origin
The country in which the washing machine was manufactured (according to the manufacturer's statement). Despite the fact that production facilities in
China are often used to assemble household appliances, specifically among washing machines there are many products assembled in Europe (
Germany,
Italy,
Poland,
Romania,
Slovakia,
Slovenia, Turkey) or in the post-Soviet space (
Belarus,
Russia,
Ukraine).
There are many stereotypes about how the build quality depends on the specific "homeland" of the device. However, most of them are not justified: the thoroughness of quality control does not depend directly on the location of production. And within individual brands, the situations in this regard can be completely opposite: relatively speaking, for one company, Polish-assembled machines can be considered more reliable than Romanian ones, and for another, vice versa. In addition, such information (about which plant a given brand has is better) often turns out to be unconfirmed rumours. In light of all this, it makes sense to pay attention to the country of production. Especially
...if you fundamentally want (or do not want) to support a certain state by purchasing products manufactured in it.
