Bambu Lab P1P
 |
 |
Close
Bambu Lab P1P | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
the Bambu Lab P1P 3D printer can be called a universal solution for home and business due to its good price/quality ratio. A reliable open-type metal base guarantees stability and minimizes vibration. The print unit is fixed on a steel beam and is highly maneuverable. The direct-type extruder can accelerate to 500 mm/s with local acceleration for processing the details of the object.
The overall dimensions of the model can reach 256x256x256 mm. The system is designed to work with different types of filaments, and control is carried out both locally using the touch panel and remotely via the Bambu Studio mobile application. The equipment is connected to the global network via Wi-Fi. The design of the model supports the installation of additional fans for rapid cooling of layers and the control board. The diameter of the steel nozzle can be adjusted, and the maximum heating temperature reaches 300 ° C. Traditionally, there is an automatic calibration and quality control system.
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Bambu Lab 2025 - new arrivals, bestsellers, and the most relevant models Bambu Lab.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Bambu Lab 2025 - new arrivals, bestsellers, and the most relevant models Bambu Lab.
I first bought the cheapest Crialite to print for DrukArmia and every time it was a dance with a tambourine. Then I sold it and bought a Bamba p1p. Printing is a pleasure, everything is very simple and clear. You choose the plastic in the settings and everything prints by itself without any additional intervention! A notification comes to the phone about the end of printing. I was especially pleased that printing stops when the plastic runs out and the printer does not print on empty. Unfortunately, when it is turned off, it is almost impossible to resume printing if there has been no light for at least 30 minutes, the table cools down and the part comes off it. Easy setup, high-quality and fast printing until I noticed  Creator A: use Bambu Lab P1P few months |
Add Review
We recommendCompare using chart →
FDM/FFF, пластик — PLA, PETG, TPU, PVA, card reader, подогреваемый стол 100 °C, экструдер: heating t 300 °C, finished model: up to 16.7 L, 256x256x256 mm
FDM/FFF, пластик — PLA, PETG, TPU, ABS, ASA, USB A, card reader, LAN, подогреваемый стол 120 °C, экструдер: heating t 320 °C, finished model: up to 15.6 L, 250х250х250 mm
FDM/FFF, пластик — ABS, PLA, TPU, PETG, PA, PC, Nylon, Silk, card reader, подогреваемый стол 110 °C, экструдер: heating t 350 °C, драйвер TMC2209, finished model: up to 37 L, 350x325x325 mm
FDM/FFF, пластик — Hyper-PLA, PLA, PETG, ABS, PLA-CF, USB A, подогреваемый стол 100 °C, экструдер: heating t 300 °C, finished model: up to 20.2 L, 260х260х300 mm
FDM/FFF, пластик — ABS, PLA, PETG, USB A, подогреваемый стол 100 °C, экструдер: heating t 265 °C, finished model: up to 3.4 L, 150x150x150 mm
FDM/FFF, пластик — ABS, PLA, ASA, PETG, TPU, USB A, LAN, подогреваемый стол 110 °C, экструдер: heating t 280 °C, finished model: up to 10.6 L, 220x220x220 mm
FDM/FFF, пластик — ABS, PLA, TPU, PETG, PET, PA, ASA, USB A, подогреваемый стол 100 °C, экструдер: heating t 300 °C, finished model: up to 12 L, 250x220x220 mm
FDM/FFF, пластик — ABS, PLA, TPU, PETG, PET, PA, PC, ASA, USB A, LAN, подогреваемый стол 100 °C, экструдер: heating t 300 °C, finished model: up to 27 L, 300x300x300 mm
FDM/FFF, пластик — PLA, ABS, ASA, PETG, USB A, подогреваемый стол 120 °C, экструдер: heating t 350 °C, finished model: 240x245x245 mm
FDM/FFF, пластик — PLA, PETG, TPU, PVA, PET, ABS, ASA, PA, PC, USB A, card reader, подогреваемый стол 110 °C, экструдер: heating t 300 °C, finished model: up to 56.7 L, 836x490x436 mm
FDM/FFF, пластик — PLA, ABS, HIPS, PETG, PC, TPU, PP, PVA, TPE, Flex, Nylon, Wood, Carbon, USB A, LAN, подогреваемый стол 110 °C, экструдер: 2, heating t 300 °C, finished model: up to 27.5 L, 300x300x305 mm
FDM/FFF, пластик — ABS, PLA, CPE, PC, PP, TPU, PVA, Nylon, LAN, подогреваемый стол 140 °C, экструдер: 2, heating t 280 °C, finished model: up to 8.7 L, 200x230x190 mm
