Beretta CIAO 16 CSI 17.7 kW
![]() | Outdated Product Energy source: gas; Installation: wall; Type: dual-circuit (heating and DHW); Heating area (m²): 142; Heat output (kW): 17.7; Coolant min. T (°C): 40; Coolant max. T (°C): 90; DHW min. T (°C): 37; DHW max. T (°C): 60; Performance (ΔT=25 °C) (L/min): 11.5; Efficiency (%): 90.5; Combustion chamber: closed (turbocharged) |
Beretta CIAO 16 CSI 17.7 kW
Energy source:gas
Mount:wall, dual-circuit
Boiler power:17.7 kW, area ~ 142 m²
Combustion chamber:closed, flue 80/125 mm
DHW temperature:from 37 °С, up to 60 °С
All specifications
Specifications CIAO 16 CSI
|
|
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Beretta 2025 - new arrivals, bestsellers, and the most relevant models Beretta.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Beretta 2025 - new arrivals, bestsellers, and the most relevant models Beretta.
5 0 4 4 |
DO NOT FUCK WITH BERETTA! ! !Purchased Bereta CD long ago. Every 1-2 years the heat exchanger gets clogged and burns out. Repair is very expensive. Today is -15C, and we are sitting for a day without heat - repair there is no heat exchanger use Beretta CIAO 24 CSI more than year |
The weak spot of any boilers, not just Beretta but all manufacturers, is their heat exchanger. Many people here complain about it. Heat exchangers fail for several reasons. 1. Pipes inside it can burst due to high water pressure in the pipeline. 2. Scale forms inside, which leads to failure. Install a pressure reducing valve to protect against high pressure and an anti-scale filter when setting up a new boiler, and it will last for many years. Good boiler for the price easy to operate In case of improper operation, the heat exchanger can fly. And this applies to any boiler of this type. use Beretta CIAO 24 CSI month or more |
I purchased this model exactly ten years ago. For all ten years, it worked flawlessly, like a Swiss watch. In the tenth year, the electronics started to "glitch," meaning it would randomly turn off by itself. I called a technician, who scratched his head and concluded that the circuit board needed to be replaced. The cost? About €193. Expensive. After searching online, I found some useful advice. Parasite currents can arise on the circuit board. No one knows where they come from. To eliminate them, you need to disconnect the boiler from the power supply for 30-40 minutes, and the currents will dissipate from the capacitors. I decided to try this advice. Believe it or not, it actually works. After this procedure, the boiler has been working without issues for the second month now. No use Beretta CIAO 24 CSI month or more i recommend it should buy |
3 out of 13 user review(s) shown
10 more user review(s)