Cooler Master Silencio S400 black (MCS-S400-KN5N-S00)
 | 4 985 ₴ Buy!  Корпус Cooler Master Silencio S400 (MCS-S400-KN5N-S00)Marketplace: Rozetka.ua Semico6 year with us (Kyiv) Report |
 |
Small micro-ATX case with good noise reduction system. The case has soundproofing inserts on all sides. On the side covers, the sound insulation is glued to the inside; it is not removable. Soundproofing removable pads are used on the top and front. The facade is hung on rotary hinges, the front door opens to an angle of 100˚. If the facade is opened, there is access to the front air intake with a high-quality nylon filter.
Additionally, there is a cover on the front for a 5.25″ drive. The Cooler Master Silencio S400 computer case supports the ability to simultaneously install a large number of memory drives. The HDD cage, which is mounted in the power supply compartment, can accommodate two full-size 3.5″ hard drives. You can place two 2.5″ drives on the upper partition of the lower section. On the back of the tray there are two slots for a 2.5″ SSD. This case will accommodate an effective CPU cooling system; the height of the processor tower is limited to 166 mm. When installing a discrete video card, you can use a solution up to 319 mm long. Under the top cover there is space for a 240 mm SVO radiator, but in this case you will have to remove the top soundproofing panel. The interface block has an SD card reader.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Cooler Master 2025 - new arrivals, bestsellers, and the most relevant models Cooler Master.
General: A large number of dampers for: PSUs, fans, 2.5" drives Vibration-absorbing material on the front and side panels + porous feet The front panel has everything, even an SD card reader Dust filters are installed wherever necessary For LCS: The case is excellently designed for installing a radiator on top. It can easily accommodate 240mm radiators with a thickness of 40mm, and if the layout of the motherboard components allows, even larger ones. General: No Type-C on the front panel The manufacturer did not provide vibration isolation for both 3.5-inch hard drive cages. The case is heavily perforated at the back, unlike the other sides, so it's better to place foam material against the wall to absorb vibrations from the case from the wall side. No vibration-absorbing material on the bottom bay for the power supply and cable management. For LSS: The case is not very well designed for installing more than one LSS radiator, so any attempts to combine 2 radiators lead to size conflicts. Selecting radiators and fans with such a setup will be possible, but not easy. The declared graphics card size is based on a fixed 25mm fan on the front panel. If you place the LSS in the front, subtract the radiator thickness from the graphics card size. The niche for the radiator mount at the front is limited to 30mm radiator thickness and 144mm width, which imposes very serious limitations on the choice of a 280mm radiator. The mounting for radiators on the rear panel is quite compact, check dimensions in advance. A radiator wider than 124mm will not fit here.  Vladimir: use Cooler Master Silencio S400 less than month |
Nothing like this body. Cooler Master is at his best as always. Buy with confidence. The main thing I liked was that no problems arose during the assembly of the system, all the necessary holes for mounting were there, and there were enough slots for routing the wires. no, everything was fine |
My main complaints about the case are related to building a custom water cooling system (CWS) inside with two radiators, so I will divide the pros and cons based on these features.