Creality Ender 3 V3 SE
 |
 |
Close
Creality Ender 3 V3 SE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
the Creality Ender 3 V3 SE 3D printer is an inexpensive solution for home, research centers and educational institutions. It is an open design with a direct-action extruder and operates on the principle of fused layers. The model is compatible with limited types of filaments (PLA, TPU, PETG) and supports file types .stl, .obj, .gcode. The geometry of objects can be different within the size range of 250x220x220 mm.
The modeling speed is not very high (250 mm / s), but even the most complex projects will be implemented within two days. A heated work table and automatic continuation of printing after a power outage are provided. The entire process is fully automated, and a special CR Touch sensor is responsible for calibration and eliminating accidental line shifts. The printer is compatible with popular programs Creality Print, Cura, Simplify3D.
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Creality 2025 - new arrivals, bestsellers, and the most relevant models Creality.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Creality 2025 - new arrivals, bestsellers, and the most relevant models Creality.
Buy Creality Ender 3 V3 SE
All prices 28 →3D-принтер Creality Ender-3 V3 SE | 9 999 ₴ |  | |||
| 9 999 ₴ |  | ||||
| 9 989 ₴ |  | ||||
| 9 999 ₴ |  | ||||
Creality Ender-3 V3 SE | 9 999 ₴ |  | |||
20 more offer(s)
Cheap but functional tool, although often the print quality depends not only on the printer, but also on the settings in the slicer and the quality of the plastic. Noisy, no Ukrainian language  Valerіy O.: use Creality Ender 3 V3 SE few months |
Чудова модель в бюджетному сегменті. Це зовсім інший рівень в порівнянні з першими едрерами. В даному випадку готовий та продуманий продукт. Гарний вибір для новачків, або друкарень, які працюють на кількість виробів. В моєму випадку так і сталось - ця модель є основою принтерів з усіх моїх друкарень. Тихий, вміє в швидкий друк, з'ємний стіл, дешевий, з коробки налаштований до прийнятного друку Дуже дешеві кулери (як і у всіх низько бюджетних принтерах). Через розмір 25*25мм не виправити проблему за допомогою фірмових якісних кулерів, типу ноктуа  Andrіy: use Creality Ender 3 V3 SE more than year |
A good printer for beginners, an issue is the manufacturing defect of the Z sensor connector, so I recommend immediately removing the cover and applying some hot glue (where the wire ends and connects to the board connector). If you're installing Klipper, make sure to adjust the Z level to the bed to avoid damaging the surface like I did. Beginner-friendly The heater can be replaced with one like in the KE version, allowing printing with plastics up to 300°. Many users have a problem with a poorly compressed bl-touch convector, which is why I burned mine and had to repair it from the start, buying a new sensor Andrey Kamyshev: use Creality Ender 3 V3 SE more than year |
Add Review
We recommendCompare using chart →
FDM/FFF, пластик — ABS, PLA, PETG, TPU, USB C, card reader, подогреваемый стол 110 °C, экструдер: heating t 260 °C, finished model: up to 12 L, 250x220x220 mm
FDM/FFF, пластик — PLA, PLA+, card reader, экструдер: heating t 250 °C, finished model: up to 1.2 L, 100x100x120 mm
FDM/FFF, пластик — ABS, PLA, TPU, PETG, USB C, card reader, подогреваемый стол 100 °C, экструдер: heating t 300 °C, finished model: up to 36 L, 400x300x300 mm
FDM/FFF, пластик — PLA, TPU, Wood, USB A, card reader, подогреваемый стол 80 °C, экструдер: heating t 260 °C, finished model: up to 5 L, 180x165x165 mm
FDM/FFF, пластик — PLA, card reader, экструдер: heating t 230 °C, finished model: up to 1 L, 100x100x100 mm
FDM/FFF, пластик — ABS, PLA, PETG, PET, TPU, ASA, PA, USB A, LAN, подогреваемый стол 110 °C, экструдер: heating t 300 °C, finished model: up to 12.8 L, 265x220x220 mm
FDM/FFF, пластик — PLA, PETG, TPU, PVA, card reader, подогреваемый стол 100 °C, экструдер: heating t 300 °C, finished model: up to 16.7 L, 256x256x256 mm
FDM/FFF, пластик — PLA, PETG, TPU, PVA, card reader, подогреваемый стол 80 °C, экструдер: heating t 300 °C, finished model: up to 5.8 L, 180x180x180 mm
LCD, разрешение матрицы 12K, пластик — Фотополимерная смола, USB A, finished model: up to 5.95 L, 219х123х220 mm
LCD, разрешение матрицы 14K, пластик — photopolymer, USB A, finished model: up to 5.65 L, 200x224x126 mm
LCD, разрешение матрицы 14K, пластик — photopolymer, USB A, LAN, finished model: up to 6.4 L, 230x223x126 mm
FDM/FFF, пластик — ABS, PLA, PETG, TPU, PVA, PET, ASA, PA, PC, Carbon, card reader, подогреваемый стол 100 °C, экструдер: heating t 300 °C, finished model: up to 16.7 L, 256x256x256 mm
The printer is quite noisy due to the small size of the main fan, and the fan won't last for years due to large rotations required for effective cooling. It lacks a filament sensor, so if you miss the end of the spool, you need to reprint the entire item from scratch, although this sensor can be installed separately. It doesn’t handle low-quality plastic well, especially those with unstable filament thickness, as the extruder cannot feed it to the nozzle. Of course, much customization has already been invented for this model, and a lot can be printed and bought.