Fondital Minorca CTFS 13 13 kW
Outdated Product 18 958 ₴ Energy source: gas; Installation: wall; Type: dual-circuit (heating and DHW); Heating area (m²): 104; Heat output (kW): 13; Coolant min. T (°C): 35; Coolant max. T (°C): 83; DHW min. T (°C): 35; DHW max. T (°C): 62; Performance (ΔT=25 °C) (L/min): 11.4; Control bus: OpenTherm; Efficiency (%): 89.9 |
Fondital Minorca CTFS 13 13 kW
Energy source:gas
Mount:wall, dual-circuit
Boiler power:13 kW, area ~ 104 m²
Combustion chamber:closed, flue 60/100 mm
DHW temperature:from 35 °С, up to 62 °С
All specifications
Specifications Minorca CTFS 13
|
|
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Fondital 2024 - new products, best sales and most actual models Fondital.
Before buying always check characteristics and configuration of product with online store manager
Catalog Fondital 2024 - new products, best sales and most actual models Fondital.
I have such a boiler, and I did not choose it, it was installed by the developer. Of the pluses, I note a very fast heating of water and heating. I hung four radiators on it, with a length. pipes about 40 meters (in both directions) + 95 meters of floor heating pipes. I made a warm floor on uniboxes, but all the same, the pressure should be normal in order to warm it all up and maintain the flow. I specifically checked how long it takes to drive heat through all pipes and how quickly it heats up a warm floor. The pipes were hot (50 degrees) after 7 minutes. The warm floor took 40 minutes to warm up the concrete. Two pumps, which is important, plus there is a tank with already heated water, and it can be used for hot water. But, it still turns on after 5 seconds of turning on the water. But consumption is not great. In the summer, purely on hot water, I got 12 cubic meters per month (only hot water). One day of heating, according to my calculations, was "eaten up" by a boiler of 4.5 - 5 cubic meters. Which, as for me, is not so much, considering how much comfort there is from having such an installation in a house / apartment. Of the advantages that I would highlight in the process of operation. When the water warms up, it turns on at full power, makes noise for literally 7 seconds, then drops power and works to maintain the temperature. That is, it is not noisy and quickly heats the water. It consumes very little electricity at the peak, which reduces the cost of the stabilizer and uninterruptible power supply. you can take the cheapest 150 watt stabilizer and an 800-watt jumper, this should be enough for a day if the light is turned off. Not noisy. Heats up water quickly. Works great for heating. even if you hang a lot of radiators on it for a long distance. It is very easy to switch modes, everything is done with one button. There are several modes here: only hot water (summer mode), hot water + heating, heating, standby mode, service mode. In the same way, it is very easy to set the desired temperature. On the right are two buttons for heating, on the left are two buttons for hot water. The temperature set in the menu holds flawlessly. Economical. If there is a 6l boiler, it still always turns on the burner to maintain the temperature in the boiler. It would be possible not to do this, it would be more economical. kulchpavel: use Fondital Minorca CTFS 11 few months |
Add Review
Fondital Minorca CTFS 13 configurations
Price for Fondital Minorca CTFS 13 | ||||
---|---|---|---|---|
Fondital Minorca CTFS 18 18.6 kW | from 25 804 ₴ | 1 offer | ||
Fondital Minorca CTFS 24 23.1 kW | from 24 099 ₴ | 6 offers |
Additional features boiler Fondital Minorca CTFS 13:
- Separate heat exchangers