Fondital Minorca CTFS 11 11.1 kW
 | Outdated Product 18 889 ₴ Energy source: gas; Installation: wall; Type: dual-circuit (heating and DHW); Heating area (m²): 89; Heat output (kW): 11.1; Coolant min. T (°C): 35; Coolant max. T (°C): 83; DHW min. T (°C): 35; DHW max. T (°C): 62; Performance (ΔT=25 °C) (L/min): 11.4; Control bus: OpenTherm; Efficiency (%): 89.9 |
 |
Close
Fondital Minorca CTFS 11 11.1 kW
Energy source:gas
Mount:wall, dual-circuit
Boiler power:11.1 kW, area ~ 89 m²
Combustion chamber:closed, flue 60/100 mm
DHW temperature:from 35 °С, up to 62 °С
All specifications
Specifications Minorca CTFS 11
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Fondital 2025 - new arrivals, bestsellers, and the most relevant models Fondital.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Fondital 2025 - new arrivals, bestsellers, and the most relevant models Fondital.
Series Fondital Minorca (wall-mounted gas)Compare using chart →
I have this boiler, and I didn't choose it; the developer installed it. On the plus side, it heats water and the heating system very quickly. I connected four radiators to it, with pipe lengths around 40 meters (both ways) + 95 meters of underfloor heating pipe. I installed the underfloor heating on uniboxes, but the pressure still needs to be sufficient to heat everything and maintain the flow. I specifically checked how long it takes to circulate heat through all the pipes and how quickly it heats the floor. The pipes were hot (50 degrees) within 7 minutes. It took 40 minutes for the floor to heat the concrete. Two pumps, which is important, plus there's a tank with preheated water that can be used for hot water. But, it still kicks in after 5 seconds of turning on the water. But the consumption is not high. In summer, just for hot water, I used 12 cubic meters per month (only hot water). Based on my calculations, one day of heating consumes 4.5 - 5 cubic meters by the boiler. Which, to me, is not that much, considering how much comfort having such a system provides in the house/apartment. Some advantages I've noticed during operation. When heating water, it turns on at full power, makes noise for literally 7 seconds, then reduces power and maintains the temperature. It is not noisy and heats water quickly. It consumes very little electricity at its peak, which reduces the cost of the stabilizer and the UPS. You can get the cheapest 150-watt stabilizer and an 800-watt UPS, and this should be enough for a day if the power is cut off. Not noisy. Heats up water quickly. Works great for heating. even if you hang a lot of radiators on it for a long distance. It is very easy to switch modes, everything is done with one button. There are several modes here: only hot water (summer mode), hot water + heating, heating, standby mode, service mode. In the same way, it is very easy to set the desired temperature. On the right are two buttons for heating, on the left are two buttons for hot water. The temperature set in the menu holds flawlessly. Economical. If there is a 6l boiler, it still always turns on the burner to maintain the temperature in the boiler. It would be possible not to do this, it would be more economical.  kulchpavel: use Fondital Minorca CTFS 11 few months |
Add Review
Fondital Minorca CTFS 11 configurations
| Price for Fondital Minorca CTFS 11 | ||||
|---|---|---|---|---|
 | Fondital Minorca CTFS 18 18.6 kW | from 25 804 ₴ | 1 offer | |
 | Fondital Minorca CTFS 24 23.1 kW | from 21 069 ₴ | 8 offers | |
Additional features boiler Fondital Minorca CTFS 11:
- Separate heat exchangers
We recommendCompare using chart →
gas, condensing, power 24 kW, area ~ 192 m², wall, dual-circuit, closed, heating: up to 192 m²
electricity, power 12 kW, area ~ 90 m², wall, single-circuit, heating: up to 90 m², warm floor mode, connection: 380В
electricity, power 29.7 kW, area ~ 223 m², wall, single-circuit, heating: up to 223 m², connection: 380В
solid fuel, power 10 kW, area ~ 80 m², floor, single-circuit, open, heating: up to 80 m²
gas, condensing, power 23.5 kW, area ~ 188 m², wall, dual-circuit, open, heating: up to 188 m², warm floor mode
