Growatt SPF5000ES
![]() |
Growatt SPF5000ES | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
A hybrid inverter designed to operate as part of a facility's power supply system with a total load of up to 5000 W. This device can operate with solar panels with a capacity of up to 6 kW (operating voltage 120 - 430 V) and 48 V battery packs (maximum charging current 80 A). In addition to operating in a system connected to a single-phase household power grid, the Growatt SPF5000ES inverter can use electricity produced by a generator.
The device has connectors for parallel connection of several inverters (for operation on a common load) and USB and RS485 ports for monitoring and configuring equipment. Safety is ensured by built-in overload and short circuit protection. The housing protection class (IP20) provides for installation of the inverter only indoors (the device operates reliably at temperatures from 0 °C to +55 °C).
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Growatt 2025 - new arrivals, bestsellers, and the most relevant models Growatt.
Buy Growatt SPF5000ES
All prices 30 →Автономний сонячний інвертор Growatt SPF5000ES Wi-Fi | 28 999 ₴ | ![]() | |||
Автономний сонячний інвертор Growatt 5000W 48V 100A (SPF 5000ES) 222226 | 49 999 ₴ | ![]() | |||
Автономний сонячний інвертор Growatt SPF 5000 ES, 5000W SPF5000ES | 35 799 ₴ | ![]() | |||
GROWATT SPF5000ES | 29 829 ₴ | ![]() | |||
Гібридний сонячний інвертор Growatt SPF 5000ES Wi-Fi | 40 124 ₴ | ![]() |
I use this inverter. So far as a backup power supply in combination with Dyness B4850. There are no complaints or problems except for the confusion with connecting the BMS battery to the inverter. The only clarification for the description. This is not a hybrid inverter but an OFF-Grid if this is important to someone when buying. Simplicity, convenience. The instructions for the Dyness B4850 battery (dip switch) and the instructions for the inverter itself (protocols) do not match due to the pinout of the cable that is included (as far as I have read on the forums) ![]() |