Hyundai H 850
Videos 5Photos 5 |
Hyundai H 850
Operating modes:hammer drilling, without a hit, chiselling
Power:800 W
Impact energy:2.5 J
Number of strokes:5000 bpm
Idle speed:930 rpm
Cartridge type:SDS+
Power supply:mains (230 V)
Weight:3 kg
Universal three-mode rotary hammer with low power (800 W), moderate speed (930 rpm) and impact force of 2.5 J. It can be used for impact and non-impact drilling, as well as perform the functions of a jackhammer (it is possible to chisel with or without turning the chuck ). All types of equipment with SDS + shanks can be inserted into the Hyundai H 850 perforator chuck. The tool comes with a plastic bag, an additional handle with a depth gauge and a set of accessories for drilling and demolition work: three concrete drills, a chisel and a pick.
All specifications
Specifications H 850
|
|
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Hyundai 2024 - new products, best sales and most actual models Hyundai.
Before buying always check characteristics and configuration of product with online store manager
Catalog Hyundai 2024 - new products, best sales and most actual models Hyundai.
Buy Hyundai H 850
All prices 9 →Перфоратор Hyundai H 850 | 2 825 ₴ | ||||
Перфоратор Hyundai H 850, в кейсе | 2 825 ₴ | ||||
ПЕРФОРАТОР 850 H H 850 | 2 825 ₴ | ||||
Перфоратор Hyundai H 850 | 2 825 ₴ | ||||
Перфоратор Hyundai H 850 | 2 825 ₴ |
4 more offer(s)
1 1 6 8 |
i am an electrician \ I drill a lot and chisel with a punch \ there were a lot of them. \ Hyundai suits me for drilling at the top and a little chiselling \ I use a more powerful punch on the bottom \ everything suits \ only changing the brushes is a little difficult. you need a skill to replace the brushes \ it’s difficult for one, you need a partner to help. use Hyundai H 850 month or more |
Concrete under a drill or chisel crumbles into dust. Hole 18mm x 20cm - less than half a minute. Compared to an impact drill, it works very quietly and many times faster. Neither the motor nor the gearbox heats up at all. At first - a terribly smelly skunk. The length of the wire is absolutely not enough anywhere - a personal extension cord is required. The "anvil" gets very hot. The additional handle is practically not fixed. Characteristics do not correspond to the declared. use Hyundai H 850 month or more |
2 out of 17 user review(s) shown
10 more user review(s)
Video reviews
We recommendCompare using chart →
The name, the appearance of the case and the punch are as in the pictures. Completeness - complete (and drills, and a peak, and a chisel - in place). BUT it never even occurred to me to look at what is written in small print on the box. And there: 800W, 930 rpm, 5000 strokes, 2.5J!!!
Noticed much later. I began to carefully examine the unit itself: on the tag - the same thing. Moreover, a piece of paper with the same data is pasted over the tag, but if the tag says "Made in Korea", then on the piece of paper - "Made under license in China"! Goodbye Korean quality, goodbye great features from all sites...
Since it was Saturday, the return had to wait. At the same time I decided to check in the work. The fact that the performance will be higher than that of an impact drill (I bought 1kW instead) did not even doubt. But so much! Impressed. I was even more impressed by how calmly, without tension, the work is going on: the 18mm drill just goes deeper and deeper, with virtually no resistance, and the 6mm drill just falls into concrete, like into sand.
What I didn’t like the most was that the Chinese stuck a safety clutch. When I tried to drill 10mm to 18mm, the drill dived a few cm at once and the clutch worked. I could only get the drill by knocking it out from the back. The same - if the drill gets into "soft" concrete. It still doesn’t work without a blow - you have to hold the rotary hammer “on weight” so that it doesn’t drill too fast and the clutch does not work.
In general, I had to leave myself.