Table Mount Iiyama DS1002D-B1

Name: Iiyama DS1002D-B1
Brand: Iiyama
Price: 4268 UAH
Availability: InStock
Rating: 3.5 (1 reviews)

Buy Iiyama DS1002D-B1


	Кронштейн iiyama DS1002D-B1 + 87 балів ITbox, для монітора, Тип - поворотно-похилий, кількість ступенів свободи - 4, мінімальна підтримувана діагональ -... more10", максимальна підтримувана діагональ - 30", VESA - 75 x 75, 100 x 75, 100 x 100, Максимальне навантаження - 10 кг, чорний Itbox.ua7 year with us (Kyiv) Report	3 973 ₴ Buy in shop

	IIYAMA DS1002D-B1 підставка на 2 РК монітора Notebooker.ua4 year with us (Kyiv) Warranty: 12 month Report	4 109 ₴ Buy in shop

	iiyama DS1002D-B1 для монітора, Тип - поворотно-похилий, кількість ступенів свободи - 4, мінімальна підтримувана діагональ - 10", максимальна п... moreідтримувана діагональ - 30", VESA - 75 x 75, 100 x 75, 100 x 100, Максимальне навантаження - 10 кг, чорний Kvshop.com.ua3 year with us (Kyiv) Warranty: 12 month manufacturer Report	4 109 ₴ Buy in shop

	Кронштейн iiyama DS1002D-B1 для монітора, Тип - поворотно-похилий, кількість ступенів свободи - 4, мінімальна підтримувана діагональ - 10", максимальна п... moreідтримувана діагональ - 30", VESA - 75 x 75, 100 x 75, 100 x 100, Максимальне навантаження - 10 кг, чорний Brain.com.ua7 year with us (Kyiv) Report	3 983 ₴ Buy in shop

	IIYAMA DS1002D-B1 підставка на 2 РК монітора DS1002D-B1 Nkt.ua3 year with us (Kyiv) Report	4 008 ₴ Buy in shop

13 more offer(s)

User reviews ₁

Write Review →

model with serious flaws

18 February 2019

Losing money. I took 1 piece for testing, later I wanted to take it to all offices. I don't recommend it. Why? I'll share my experience.

Advantages:
A. Packaging. Well thought out. Packing such a large item neatly and tightly requires skill. All bolts with keys are in numbered bags, very nice. The instructions are concise and clear, one sheet in several languages. Everything seems thoroughly planned.
B. Assembly. It is enjoyable.
Not without drawbacks:
- unpainted bolts on an entirely black structure. A downside;
- no key for the screws at the base. Why they needed different screws there is unclear. A downside;
- factory assembly defect. The factory over-tightened the brackets, crushed the metal, and after full assembly the "right arm" was lower than the "left arm". I photographed everything, there's a defect in two places. It wasn't immediately visible, covered by plastic overlays. It's been 3 months, too late to return, won't prove a warranty case. I straightened the dent myself, but the "arm" still doesn't hold straight;
- weak glue on the foot pads (4 rubber pads). The glue on the pads literally wore off within minutes of adjustments. If you move the monitor, the pads pop out;
- Warning stickers. There are two of them. They are stuck on firmly. Apparently, so their yellow warning is always visible in prominent places. I barely managed to remove them.
Limited alternatives. Why take such a mount at all? To free up space on the table, raise monitors higher, hide wires, place 4 monitors instead of 2, arrange pairs in different configurations. This mount solves none of these tasks.

Judge for yourself:
- Stands are obstructive. It has two giant foot stands that really get in the way.
- Height. The stand itself isn’t very high, the monitors are raised to a standard height and that's it. At least, the existing 27 monitors we have raise to the same height, rotate horizontally and vertically;
- The hole in the stand hides the cables. But if they were not long enough, now you'll have to change them;
- Folding the arms isn't possible. If a colleague sits across from me at the table, right now I can simply remove one monitor and talk. The new mount doesn't fold like that. It's best not to touch it at all, the metal feels weak in your hands;
- Of course, you can't put 4 monitors. Even with extra arms. The arms are set only straight;
- Set higher-lower. The arms are set only at one height. Right now I can set the monitors closer-further, higher-lower. This is needed for presentations, business games. You won’t be able to do that on the mount.

The main concerns:
1. Soft metal (use a different one or put a gear inside);
2. Hidden factory defect (crumpled and covered), no quality control.

Discuss

Show Original

Add Review