Protherm Medved 40 PLO 35 kW
 | Outdated Product 43 799 ₴ Heating gas boiler with a useful power of 35 kW. The model is equipped with a built-in boiler, thanks to which the hot water supply system does not depend on the rate of water supply and there is always a certain amount of hot water “at hand”. With an efficiency of 92%, the maximum consumption of natural gas becomes 4 cubic metres per hour. The combustion chamber is open. A piezo ignition and flame control system is also available. |
 |
Close
We recommend products in stockBoilers Protherm →
solid fuel, power 15 kW, area ~ 120 m², floor, single-circuit, open, heating: up to 120 m²
firewood, pyrolysis, power 12 kW, area ~ 96 m², floor, single-circuit, open, heating: up to 96 m²
solid fuel, power 12 kW, area ~ 96 m², floor, single-circuit, open, heating: up to 96 m²
solid fuel, power 25 kW, area ~ 200 m², floor, single-circuit, open, heating: up to 200 m²
solid fuel, power 40 kW, area ~ 320 m², floor, single-circuit, open, heating: up to 320 m²
solid fuel, power 30 kW, area ~ 240 m², floor, single-circuit, open, heating: up to 240 m²
solid fuel, power 17 kW, area ~ 136 m², floor, single-circuit, open, heating: up to 136 m²
solid fuel, power 13 kW, area ~ 104 m², floor, single-circuit, open, heating: up to 104 m²
Protherm Medved 40 PLO 35 kW
Energy source:gas
Mount:floor, single-circuit
Boiler power:35 kW, area ~ 262 m²
Combustion chamber:open, flue 150 mm
Heating gas boiler with a useful power of 35 kW. The model is equipped with a built-in boiler, thanks to which the hot water supply system does not depend on the rate of water supply and there is always a certain amount of hot water “at hand”. With an efficiency of 92%, the maximum consumption of natural gas becomes 4 cubic metres per hour. The combustion chamber is open. A piezo ignition and flame control system is also available.
All specifications
Specifications Medved 40 PLO
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Protherm 2025 - new arrivals, bestsellers, and the most relevant models Protherm.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Protherm 2025 - new arrivals, bestsellers, and the most relevant models Protherm.
AccessoriesAll accessories for Protherm Medved 40 PLO →
I’m sharing my opinion about the Bear PLO 17 kW floor-standing gas boiler I bought a year ago. I wanted to buy a simple and reliable boiler, with a minimum of electronics and other fancy bells and whistles. Bear PLO is electrically independent, boiler with piezo ignition. For its normal operation, you only need gas and nothing more. I have an imported one, because... there is no highway. The heat exchanger is made of cast iron; if used properly, it is an almost eternal material; I myself have seen a cast iron boiler made in 1949 that is still working, I know what I’m talking about. The heating issue was solved by PLO Bear, the radiators are hot even in severe frosts. I have been the satisfied owner of this boiler for more than a year, during all this time the Bear has not caused any problems, the main thing is to make sure that the gas does not run out - and everything will be great. The boiler is definitely worth the money. reliable performance no use Protherm Medved 20 PLO more than year |
Add Review
