Zalman S4 PLUS black
 |
 |
Gaming Midi Tower case with an interesting front panel and good RGB lighting. The front panel of this model is partly made of a metal grill, which provides an increased inflow of fresh air. There is a transparent sidewall created from a single piece of acrylic. The platform is designed to install the motherboard of the following formats: ATX, Mini-ITX and microATX. The chassis easily accommodates discrete graphics up to 315mm long and a processor tower up to 160mm high.
The Zalman S4 PLUS case comes with three 120mm fans pre-installed: two coolers mounted on the front and one on the back. Each of the turntables has a bright RGB backlight. In total, 8 fans can be used for air cooling, and it is also possible to combine air cooling with liquid cooling. The mounting location of the power supply is placed in the lower compartment, which is fenced off from the main space by a ventilated casing. Along with the power supply, the bottom bay also accommodates a rack for two 3.5" HDD drives. There is room on the motherboard tray to fix one 2.5" SSD SSD. The control panel has power buttons and USB interfaces (a pair of version 2.0 and one 3.0), as well as mini-Jack audio jacks.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Zalman 2025 - new arrivals, bestsellers, and the most relevant models Zalman.
The case is gorgeous: beautiful appearance, excellent ventilation, convenient cable management, medium (in thickness) metal Acrylic window that gets scratched by AIR, loud fans and a set: there are not even standoffs for installing the board in the case, the width of the case does not allow you to install too large coolers (gammax 300 fits almost flush)  Ivan: use Zalman S4 PLUS few months |
Attempts to install the SSD on the "backpack" behind the rear panel will not be successful. Lots of space for cable routing, nice design and good ventilation thanks to the mesh on the front panel. The kit includes spare plugs for expansion slots and rubber plugs for the front panel slots. No problems occurred during assembly except for those described below. The coolers are noisy, the backlight is a bit twitchy (yes, the backlight is not static). An absolutely idiotic "backpack" for the SSD behind the back panel (my SATA cable simply did not fit there because this "backpack" is too long than necessary). With good ventilation comes more dust. The side wall is acrylic. use Zalman S4 PLUS few months |
The description says that a 160mm cooler fits in there, but in reality the maximum is 150 (not more) Good, beautiful and high-quality case, I liked it! i didn't notice Gleb Anistarov: use Zalman S4 PLUS few months |
