Comparison Logitech G915 TKL Lightspeed Wireless Tactile Switch vs Logitech G815 Lightsync RGB Tactile Switch

— Wired. Connection using a cable with one or another type of connector — most often USB, less often PS/2 or a proprietary plug (see "Connection interface"). Wired keyboards are notable for their low cost and overall convenience — in the sense that they do not require batteries and the operating time is unlimited. However the wire limits mobility; however, given that most often the keyboard is used in close proximity to the computer, this shortcoming cannot be called critical.

— Radio. Wireless connection over the air, usually through a wireless adapter connected to a computer via a USB port. The main advantage of this option can be called the actual absence of a wire; while the communication range is usually several metres, which gives freedom of movement and even allows you to use the keyboard as a "computer remote control". On the other hand, wireless models are much more expensive than wired ones, and their operation requires separate power supply from batteries or a rechargeable battery, the charge of which is limited — accordingly, the continuous operation time is limited. Separately, we note that this option is designed mainly for stationary PCs; if a wireless keyboard is needed for a laptop, it is better to pay attention to Bluetooth models (see below).

— Bluetooth. Ano...ther way to wirelessly connect keyboards. Technically, Bluetooth is based on radio waves, but this technology has its own characteristics, so it is listed separately from the "normal" radio connection (see above). The main one of these features is that many models of modern electronics (almost all laptops and tablets, some PCs, etc.) are equipped with built-in Bluetooth modules, which allows you to connect such keyboards without using additional adapters. In addition, the range of such a connection is officially at least 10 m (in fact, of course, it depends on obstacles, interference, etc.). It is this option that will be optimal if you need a wireless keyboard for a Bluetooth-enabled device.

— Bluetooth / radio. Wireless keyboards that can connect both via Bluetooth and radio. See above for more details on each of these options. Also note here that such a keyboard is usually connected directly to a Bluetooth device (for example, a laptop), and if the computer does not support Bluetooth, you can connect a USB adapter to it and use a radio connection. Thus, the keyboard is as versatile as possible in connection. However, such versatility significantly affects the cost, and is required not so often; so this option is not widely used.

— Bluetooth / radio / wired. Keyboards that support all three connection methods described above. This is the most versatile option, giving the user the freedom to choose for different situations. For example, while playing a game or watching a movie, you can sit in a comfortable chair away from the screen by connecting the device wirelessly, and when typing or surfing the Internet, you can move to the table and use the wire, saving battery power. At the same time, such versatility is not often required and is expensive, so models with this type of connection are not popular either.

The keyboard's ability to quickly switch between multiple devices. Multi-Device allows you to simultaneously work with a tablet, TV, and other devices with one keyboard.

The wireless connection range provided by the keyboard (see "Connection type").

Almost all modern wireless models function reliably at a distance of at least 2-3 meters. Therefore, you only need to pay attention to this parameter if the keyboard will be used farther from the computer. When evaluating the range, keep in mind that it is given for ideal conditions: no interference or obstacles, a fully charged battery, etc. In practice, the actual range might be somewhat shorter, so it's advisable to account for a margin when selecting a model. Nevertheless, the stated range can give a good indication of the practical capabilities of different models and help in comparing them.

Traditional keyboards are divided into three main varieties — full-size, compact and ultra-compact. The main difference between them is that full-size models have a Numpad — an additional block with numeric keys and arithmetic signs. Compact models, respectively, do not have a numpad, and in ultra-compact models, the arrow block is either completely absent or located under the Enter key in the form of very small keys.

And full-size, and compact, and ultra-compact keyboards can have different types of layouts. At the same time, the arrangement of letters and numbers above the letters in all types of layouts is the same, the differences are in the shape and position of additional keys (special characters like backslash, system control, modifiers like Shift and Alt, etc.). Here are the most popular options:

— ANSI. The "American" layout format, the distinguishing features of which are, in particular, the same width of both Shift keys, the same labeling and assignment of the Alt keys, the single-row Enter key and the backslash located above it (which is often made slightly longer than the standard key).

— ISO. "European" layout format. The Enter key occupies two rows, while at the top it is slightly longer than at the bottom; the left Shift is shorter than the right...one, there is a backslash next to it; next to the bottom of the Enter may be a second backslash or other special character key; the right Alt is designated as Alt Gr and is intended for entering additional characters in European languages.

— K.S. The "Korean" keyboard layout provides a double-row Enter, as in the ISO described above, however, in this case, the lower part of the Enter is made longer, and not the upper one. The backslash is above Enter, next to Backspace, and Backspace itself is the same length as standard keys (that is, noticeably shorter than in other layouts).

— JIS. Keyboards with a "Japanese" layout have a double-row Enter with an increased length of the upper half — like the ISO described above. However, in this case, the backslash is not located on the left side of the keyboard, but on the right, next to Enter (where an additional symbol key can be located in ISO). Additional character keys may be provided — next to Backspace (as in KS) and/or to the left of the right Shift. In addition, the right Alt can be formatted as Alt Gr.

In addition to compact and full-size, there are also non-traditional keyboard formats:

— Numpad. Separately made block of numeric keys. With the help of such a device, you can, in particular, turn a compact keyboard into a full-size one. Among other things, this combination can be useful for travel: packing a Numpad separately from the keyboard is easier than finding a place for a full-sized "board". Another option for using the Numpad is to connect to a cash register, terminal, etc. to work as a calculator keyboard or in a similar capacity.

— Keypad. A specialized device in the form of a small (approximately 15 – 20 keys) keyboard under one hand; usually, it is complemented by an arm rest, and often also by side buttons for the thumb. Such devices are especially convenient for games and are mainly used in them — certain game actions can be attached to the keypad buttons (including those that are usually implemented through the menu or a key combination on a standard keyboard). The keypad can both complement the main keyboard and serve as a completely separate game pad.

— Non-standard. Non-standard format keyboards that do not belong to any of the varieties described above. The specific design and use of such devices may vary. So, these can be game models in the form of the left half of a standard keyboard (this part is mainly used in games); ultra-compact models for tablets (see "In the direction"); keyboards for TVs, supplemented with special buttons and designed to be held in two hands in the manner of a gamepad, etc.

The number of additional keys provided in the design of the keyboard.

Such keys do not belong to the standard layout and are intended for quick access to specific functions or individual applications — for example, to control the media player or open mail with one click. This function is convenient because commands from additional keys are usually recognized by the system regardless of what is on the screen — thanks to this, for example, you do not have to close the text editor to switch tracks in the player.

Note that in this case we are talking about individual keys that have a strictly defined purpose and corresponding markings. Programmable buttons, the Fn key (see below) and the functions of the main keys implemented through Fn are not taken into account in this paragraph.

The number of programmable keys provided in the design of the keyboard. Like the additional ones described above, such keys are located outside the standard layout. At the same time, they do not have a rigidly defined purpose — each individual function can be set by the user himself, hence the name. Some manufacturers, however, can initially programme these keys, but this programme can still be changed if desired.

The advantage of such equipment is obvious: additional features of the keyboard can be easily customized. Gamers especially appreciate this feature, so programmable keys are often found in gaming models. On the other hand, the keys themselves usually have neutral markings (for example, P1, P2 ...), and the user has to remember which function is “linked” to where; this can cause confusion.

A parameter that determines the maximum number of simultaneously pressed keys, the signal from which the keyboard is able to process and transmit to the computer. Instead of the "lattice" symbol in the abbreviation KRO, a number is indicated showing the allowable number of simultaneously pressed buttons. Most membrane keyboards come in the 2KRO and 3KRO grades, mechanical models usually start at 6KRO. The NKRO marking says that it is possible to issue a signal from an unlimited number of keys in one sitting.

The number of native USB ports in the keyboard design.

The presence of these ports actually allows you to use the keyboard as a USB hub — for connecting various peripherals to a computer. Such a connection is convenient because the connectors are literally at hand, you do not need to reach for the system unit. The number of ports corresponds to the number of USB devices that can be connected to the keyboard at the same time without the use of splitters and other additional equipment.

The type of power used in wireless keyboards. It can be a replaceable battery or its own built-in battery.

As replaceable batteries in modern keyboards, batteries or accumulators of the AA (“finger”) or AAA (“mini-finger”) format can be used. The main advantage of this power supply is the ability to quickly replace dead batteries with new ones — if there are any left, a few seconds are enough, and the keyboard is ready to work again. However, batteries are often not included and must be purchased separately. In addition, anyway, you have to buy new batteries as the old ones wear out — or fork out for rather expensive batteries and, possibly, a charger.

Built-in battery, in turn, relieves the user of the need to purchase batteries. On the other hand, in the event of a discharge, such a battery cannot be quickly replaced, and the only option to continue working is to charge it, which can take quite a long time.