Comparison PowerLand YK-ET1801B vs Kettler Track S8

The slowest speed at which the treadmill belt can move. This parameter is indicated only for electric models (see "Load system"), as in other types, it depends solely on the user himself.

The ability to operate the belt at a low speed is important if strong loads are contraindicated — for example, during the rehabilitation period after injuries. In many modern models, this figure is only 1 km/h (even though the average walking speed of a healthy person is about 5 km/h). Thus, they can be used even with serious injuries, when normal walking is very difficult.

The largest angle at which the treadmill can be tilted; For details on this function, see "Adjustable incline". The greater the maximum angle, the steeper the climb can be simulated by the treadmill, and the more intense the load it can provide. The angle of inclination is calculated from the horizontal.

Some models allow you to tilt the belt not only simulating an ascent but also simulating a descent. For such models, two values of the maximum angles are indicated, while the “downhill” angle is indicated by a negative number — for example, “20 ° / -6 °”

Most treadmills have more than three points of support, which means that without additional adjustments, they will only stand stable on a flat surface. However, in any room, there is a possibility of unevenness on the floor, and compensators are used to ensure stability on such surfaces. The principle of their operation is very simple: each support leg of the treadmill is independently height-adjustable, which allows you to adjust the design for reliable installation on all points of support.

The number of training programs provided for in the design of the simulator. This is not about load levels, but about automatic modes of operation, during which the belt can change the speed of movement, signal the beginning and end of a workout, etc. For details on the number of programs, see Programs and information.

A type of training program is called heart rate-dependent, in which the load is adjusted depending on the heart rate of the athlete (for more details on the value of the pulse, see " Information— Heart rate measurement "). You just need to set the desired rate — and the machine will automatically adjust all the training parameters so that this rate is maintained for the required time.

The simplest version of the heart rate program is the constant heart rate mode when the heart rate is maintained at the same level throughout the entire workout. However, this set of such programs is not limited. As in the case of training, the wider this set of heart rate-dependent programs in treadmills, the more opportunities you have to choose the best option for each specific moment.

— handlebar control. On the handles of the treadmill are buttons for controlling training modes. Usually, they can be used to adjust the speed of the running belt, as well as stop/start the treadmill. In more advanced machines, buttons can additionally be placed on the handles to adjust the angle of inclination, switch training programs, start/stop the timer, etc.

— Vibration massager. The treadmill is additionally equipped with a vibration massager with replaceable belts, which is quite rare among such devices. The vibration massager system consists of a stable, height-adjustable stand and a set of special belts. By selecting the necessary belt, program, speed and intensity of work, the user can perform various types of massages: relaxing, corrective, anti-cellulite, etc. During the procedure, the device simultaneously massages the muscles and makes them contract. The vibration massage function is primarily used to correct the figure, warm up the muscles before exercise and relieve fatigue after them.

— Fan. The treadmill's fan will keep you comfortable during intense workouts, especially in warm weather: the additional air movement increases the evaporation of sweat from the skin, helps cool the body down and prevents overheating.

— Bottle holder. A special stand that allows you to convenientl...y place a bottle of water directly on the simulator. The holder is usually made in such a way that, on the one hand, it is easy to get the bottle, on the other hand, it excludes the possibility of its falling out. This feature will allow you to always have a supply of water on hand and make up for its lack in the body during long workouts, without being distracted from the actual workout and without stopping movement.

— Emergency stop key. The possibility of an emergency stop of the treadmill can significantly increase the safety of training. Usually, an emergency stop key consists of a magnetic contact group, a cable and a clothespin. So, during training, a magnetic key is attached to the control panel of the simulator, a cable is drawn from it (usually less than 1 metre long), and at the end, there is a clothespin that is fixed to the edge of a T-shirt or a belt. If the user stumbles or loses control of the treadmill's speed, the tightness of the cable will simply pull out the magnetic key, which will turn off the motor.

— Colour display. The presence of a colour display in the design of the treadmill. This feature does not affect the main features of the device. However, such displays are considered more convenient and pleasant to view than monochromatic ones. Some models may include various additional features designed to make training more interesting — for example, the ability to play DVD movies or virtual workouts (see above).

— Bluetooth. The presence of a Bluetooth wireless module in the treadmill allows the treadmill to be synchronized with the user's smartphone, tablet or laptop/PC. Thanks to data synchronization, the user will be able to control the results of training in a convenient form. Additionally, Bluetooth wireless communication can be used to download new training programs to the computer of the treadmill and synchronize with the heart rate monitor via the ANT protocol.

— Wi-Fi. The presence of a Wi-Fi wireless communication module in the design of the treadmill. The Wi-Fi interface was originally intended for connecting to computer networks (including Internet access), but more recently it has also been used for direct connection between different devices, without using a network. The specific features implemented using this module may be different. So, some machines can interact with training programs installed on tablets and smartphones and transmit information to such programs about the details of the training (distance travelled, calories burned, etc.), others allow you to update the firmware or change the settings remotely, etc.

— USB port. USB itself is a universal interface designed to connect external peripherals to a computer or other control device. Actually, for the same purpose it is used in modern treadmills; but the specific application in different models may be different. So, USB can be used to connect heart rate sensors and other specialized accessories, to play music and/or video from UDB drives, to update the firmware using the same USB drive, etc.

— TV tuner. The presence in the design of the simulator of a TV tuner — a device designed to receive television broadcasts. This function is useful for those who would like to be able to watch their favourite TV programs, series, etc. in the process of training: usually, models with TV tuners also have colour displays and speakers (see below), which allows you to watch the broadcast directly on the treadmill. However, you need to remember that tuners can be designed for different broadcast standards; therefore, before purchasing a model with this function, it is advisable to make sure that it is compatible with local TV broadcasts.

— mini-jack 3.5 mm (Aux). The 3.5 mm mini-jack (Aux) connector is designed to connect an MP3 player or a smartphone/tablet. This allows you to output the sound signal from multimedia devices to the speakers built into the treadmill. Some models may additionally have a mini-jack connector for connecting headphones. The sound output to the headphones will allow you to train to your favourite music without disturbing other people in the same room.

— Speakers. Through its speakers, the treadmill can play various audio information — service signals (exceeding the heart rate, the end of the program, etc.) or musical compositions and soundtracks of films played on the display (see above).

— Tablet stand. Allows you to securely and safely mount a tablet with almost any screen size on the treadmill. Thanks to this, the user can enjoy watching TV shows or movies directly during training. Usually, the stand is located under the main screen of the treadmill. Advanced class models are often equipped with a stand with the ability to adjust the angle of the tablet. Also, the treadmill can be equipped with a USB port and built-in speakers; some models may have a Wi-Fi wireless module.

The country from which the product brand originates. The brand can be described as a general designation by which the goods of a particular manufacturer are known in the market. The country of its origin does not always coincide with the actual place of production of the model: to reduce the cost of production, many modern companies transfer it to other countries. It is quite normal for products, for example, of an American or German brand, to be made in Taiwan or Turkey. Contrary to popular belief, this in itself does not lead to a decrease in the quality of the goods — it all depends on how carefully the brand owner controls the production. And many companies, especially large and famous, monitor the quality very zealously — after all, their reputation depends on it.

Under the dimensions of the belt in the specs of treadmills, they usually mean the dimensions of the working area — that is, the running deck within which the user's feet stay during training. Several points determine the optimal length and width of the belt.

The long treadmill length ensures safety — less likely to seriously stumble and fall out of rhythm. On the other hand, a long belt requires a more powerful motor, and the dimensions of the treadmills increase accordingly. With all this in mind, it is believed that the optimal length for home use is 120 – 130 cm; longer belts are designed for use in fitness centres and professional training.

Both safety and comfort when using the treadmill also depend on the width of the belt. This parameter is especially important for people of large build — on a narrow canvas, they can be “cramped”. On the other hand, as in the case of length, a large width means a large size of the treadmill itself. In general, entry-level models have a belt up to 40 cm, in more advanced treadmills there are options for 45 cm, and for professional use, this figure can reach 50 cm.

When choosing a treadmill according to the size of the belt, it is best not only to take into account all of the above, but also to try out the option that interests you before making a purchase. After all, a lot depends on personal characteristics and preferences, and a seemingly suitable treadmill may be small — or vice versa, a more...compact and inexpensive option is quite suitable.

The dimensions of the treadmill in the assembled state. It is important to note that more space is needed for the comfortable and proper operation of the treadmill.