Укр|Eng|Рус
Ukraine
Catalog   /   TVs & Video   /   TV Mounts & Stands

Comparison Brateck LPA51-223 vs Brateck LDA11-223

Add to comparison
Brateck LPA51-223
Brateck LDA11-223
Brateck LPA51-223Brateck LDA11-223
Compare prices 32
from 459 ₴
Outdated Product
TOP sellers
Typewall mountwall mount
Specs
Minimum size23 "23 "
Max. size42 "42 "
Max. weight20 kg30 kg
Minimum distance from the wall82 mm49 mm
Max. distance from wall392 mm393 mm
Adjustments
tilt
turn
depth adjustment
slide
tilt
turn
depth adjustment
slide
Angles and dimensions
Upward tilt angle20 °15 °
Downward tilt angle20 °15 °
Turn angle180 °180 °
VESA
75x75mm
100x100 mm
200x100mm
200x200mm
75x75mm
100x100 mm
200x100mm
200x200mm
General
Cable management
Color
Added to E-Catalogjune 2016june 2013

Max. weight

The maximum weight of the TV that can be installed on the mount/stand; more specifically, it is the maximum weight that the mount/stand can support for an indefinitely long time without any negative consequences. Unlike the screen size described above, this parameter is accurate and should not be exceeded: perhaps the stand/mount will not break immediately under excess weight, but this can happen at any time, and such a breakdown is not covered by the warranty.

It is worth considering that for classic stands with several shelves (see "Type"), the maximum wheight is usually indicated for the entire structure as a whole and is the sum of the loads for each individual shelf. Thus, the maximum weight of the TV is not limited by the total maximum wheight, but by the maximum wheight for one shelf. This does not apply to stands with mounts; they usually list the maximum wheight on the mount, in which case it corresponds to the maximum weight of the TV.

The screen size is directly related to the maximum wheight (after all, a large TV weighs more). Typically, for screens up to 24", structures with a maximum wheight of about 5-6 kg are usually quite enough, for a 32" device, about 12 kg may be needed, large 55" screens reach a maximum weight of about 25-30 kg, and in the case of plasma panels, these figures increase by 1.5-2 times However, anyway, before choosing, you should clarify the weight of the specific TV model for which the stand/mount is selected.

Minimum distance from the wall

The smallest possible distance between the wall on which the mount is hung and its farthest protruding point. First of all, the overall compactness of the design depends on the minimum distance: if you do not want the TV to protrude far forward from the wall, you should pay attention to models with a small minimum distance. And if the mount provides length adjustment, this parameter determines the limits of such adjustment.

Max. distance from wall

The maximum distance from the TV mounting point to the wall (in the case of ceiling mounts, to the ceiling) provided by the mount. See "Minimum distance from wall" for details.

Upward tilt angle

The maximum upwards tilt angle from the vertical of the installed screen. The larger the tilt angle, the wider the adjustment possibilities, however, in fact, an angle of more than 5° is rarely required.

Downward tilt angle

The maximum downward tilt angle from the vertical for the installed screen. As with the upward tilt angle, the larger this angle, the wider the adjustment possibilities; however, downward tilt is usually required more frequently (the TV may be installed under the ceiling), and its angle can be as high as 15-20°.

Cable management

Possibility of placing the cables connected to the TV inside the rod or support of the mount(for ceiling and floor structures, respectively, see "Type"). This placement gives the whole structure a neat appearance, because cables, often of different sizes and colours, and even tangled with each other, are hidden from view and do not spoil the aesthetics.
Price graph
Brateck LPA51-223 often compared