Feed rate
The maximum glue flow rate that the gun can provide is, in fact, the peak performance of the tool.
In general, indicators up to 10 g / min can be attributed to low, up to 20 g / min — to medium, more than 20 g / min — to high. The larger the scale of the planned work, the higher the glue supply rate is desirable for them; on the other hand,
high performance may be overkill in cases where little adhesive is required. However, if the tool is bought for simple household tasks, this indicator can be ignored.
Functions
—
Anti-drip system. This feature prevents the adhesive from dripping when the spray gun stops working. This is implemented by moving the rod deep into the case, as a result of which it does not continue to melt further in the heated heater and does not drip onto the table, floor, etc.
—
Heating indicator. A pointer that notifies the user of the heating process. Usually, it looks like a light bulb that is on while the tool is heating up, and when the operating temperature is reached, it goes out or changes colour. This allows you to easily determine the moment when you can start work, without fear that the rod has not melted enough. The same pointer can play the role of an indicator of network connection.
—
Network connection indicator. A pointer indicating that the instrument is connected to the network. Usually performed in the form of a light bulb, which in some models also works as a heating indicator. The mains connection indication, among other things, makes it easier to identify certain problems (for example, breaks in the power cord or non-working sockets).
—
Backlight. Own lighting system — usually in the form of a small light bulb under the nozzle. This feature greatly simplifies work in low light conditions: the gun itself illuminates the gluing site, eliminating the need for the user to use
...external light sources.
— Detachable power cord. A mains lead that is connected to the gun using a quick-release fastener, usually in the form of a socket with a pair of pins and an appropriate plug. This feature not only makes it easier to store and transport the tool, but can also come in handy during work: if the length of the wire is not enough, and little glue is needed, the gun can be detached and quickly brought to the right place. Of course, there is no question of long-term work without a wire, but removing the tool from the cord can be more convenient than looking for another outlet, and the battery life of some models is enough for 5 to 10 minutes of work.Battery capacity
The capacity of the battery installed in the respective tool (see "Power supply").
The higher the capacity, the more energy the battery can store and the longer it can power the tool without recharging. At the same time, the actual battery life of work depends on many other factors (primarily the power of the gun). Therefore, only models with very similar characteristics can be compared with each other in terms of capacity, and even in such cases, the comparison may not be correct.
However, this information may appear when looking for a spare or replacement battery: it is desirable that its capacity is not lower than that of a regular one.
Charging time
The required time to charge the battery of the device from a fully discharged to a "combat state".
Sticks included
The number of glue sticks supplied with the gun.
The presence of
rods allows you to use the tool "out of the box" without buying additional materials. At the same time, complete consumables, by definition, have the optimal length and diameter.
