Укр|Eng|Рус
Ukraine
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Kitchen Sinks & Accessories   /   Kitchen Sinks

Comparison Franke Sirius SID 611-62 Slim 114.0497.937 620x435 vs Franke Orion Tectonite OID 611-78 114.0305.715 780x500

Add to comparison
Franke Sirius SID 611-62 Slim 114.0497.937 620x435
Franke Orion Tectonite OID 611-78 114.0305.715 780x500
Franke Sirius SID 611-62 Slim 114.0497.937 620x435Franke Orion Tectonite OID 611-78 114.0305.715 780x500
Compare prices 2Compare prices 38
TOP sellers
Mount type
mortise overhead
mortise overhead
Materialengineered stoneengineered stone
Shaperectangularrectangular
Working surface
Bowl locationreversiblereversible
Dish drying (wing)
Dish drying drain
Overflow
Tap hole
Tap hole diameter35 mm
General
Minimum cabinet width (base)450 mm450 mm
Working surface size620x435 mm780x500 mm
Mortise hole size (overhead)760x480 mm
Main bowl size (LxWxD)354x376x200 mm350x430x180 mm
Country of originSwitzerlandSwitzerland
Manufacturer's warranty10 years
Color
Added to E-Catalogmarch 2017february 2014

Dish drying drain

Additional drain hole on the wing for drying the dishes (cf. relevant paragraph). Drain on drying dishes increases the efficiency of removing moisture from the wing and reduces the likelihood that water will get outside the sink.

Overflow

Overflow has the form of an opening located at the top of the bowl; this opening must be connected to the drain by a hose. Such a device avoids the transfusion of water over the edge of the sink: when the bowl overflows, water will flow into the sewer through the overflow and will not rise above the edges.

Tap hole

Availability of space in the sink for the installation of the mixer. This hole can be cut in advance or, if necessary, knocked out during installation (the corresponding place on the model already exists and is made of a softer material).

Tap hole diameter

The diameter of hole required for tap mount. This size makes it possible to understand the size of the tap to be selected, the size of the additional parts to be fitted and whether the opening for an existing faucet has to be extended or narrowed.

Manufacturer's warranty

The warranty period declared by the manufacturer for this model is the period during which the manufacturer guarantees normal operation. The specific terms of the warranty may vary, however, as a rule, it covers factory defects and malfunctions caused by the fault of the manufacturer/seller and discovered during normal use, without violating the rules.

The longer the warranty period (mostly there are models with a guarantee for 5 years, 10 years, 15 years or even with a lifetime warranty) - the more reliable the sink is, the higher its overall quality, all other things being equal, but the more expensive it will cost in comparison with analogues.

However, depending on the market (country in which it is sold), the warranty for the model may differ. For example, for the countries of the European Union, America and other advanced states, the guarantee can be increased.
Price graph
Franke Sirius SID 611-62 Slim 114.0497.937 often compared
Franke Orion Tectonite OID 611-78 114.0305.715 often compared