DeWALT DWE7485
 |
 |
DeWALT DWE7485 230 V, without workbench230 V, workbench DE7400 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Desktop disk or so-called circular saw with a sturdy aluminium folding table for active professional use. Fully compatible with DeWALT DE7400 mobile workbench. Compact dimensions allow you to install it in any, including in a home workshop, garage or workshop. The load-bearing steel frame protects internal components from impact or fall damage, while tough rubber grips provide stability.
Equipped with a powerful 1850 W electric motor and designed for use with 210 mm saw blades with a bore diameter of 30 mm. The DeWALT DWE7485 table saw provides quick sawing or precise rip cutting of soft and hard wood, wood-based composite materials (fibreboard and chipboard, laminate, laminated chipboard), roofing and wall sandwich panels of small thickness, as well as thermoplastic plastics.
The maximum cutting depth is 65 mm, when the disc is tilted at an angle of 45°, the depth is reduced to 45 mm. A two-position guide allows you to cut parts of a significant size (up to 610 mm), its fixation does not require the use of a key. The two-piece transparent shroud protects the user without interfering with visual line inspection. To collect the resulting processing products, there is an Air Lock nozzle designed to connect a vacuum cleaner.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog DeWALT 2025 - new arrivals, bestsellers, and the most relevant models DeWALT.
Buy DeWALT DWE7485
All prices 28 →Пила настільна-циркулярна DeWALT DWE7485 | 32 799 ₴ |  | |||
| 32 799 ₴ |  | ||||
Пила настільна циркулярна DeWALT DWE7485 | 25 599 ₴ |  | |||
Пила настільна-циркулярна мережева DeWALT DWE7485 | 32 799 ₴ |  | |||
| 30 999 ₴ |  | ||||
0 0 0 5 |
Small, with many quite successful solutions. Parallel fence system, all accessories onboard. Good dust extraction. Quick riving knife change. Semi-ring system. Ordered here, came with a model with two grooves. There's no mechanical angle adjustment, just hands, just hardcore (luckily, the 90 and 45 stops work fine). There's a noticeable play in the sliding system. To ensure the parallel stop remains parallel, you either need to guide it in one direction or tighten the synchronizing rod. The factory-fitted blade might be good, but damn, it's crooked. Generally, you shouldn't count on the stock blade, but considering it's quite thin — a wobble of 0.2mm is unacceptable to me. This same blade was tightened so much that all the paint came off at the contact point. I'm not sure if that's a negative for the blade or the assembly. The insert can either be aligned with the table or fixed with a lock (the lock bends the back part of the insert). It will need some tweaking. The parallel stop lacks a 90-degree adjustment relative to the table, so I fixed it with two layers of painter's tape under the base. The crosscut stop is junk.  Den Xajrov: use DeWALT DWE7485 less than month |
DWE7485-QS 389C1 The best option for home and row. Very decent workmanship. Small in the rip fence, but not critical for me. Excellent combination of weight - 22 kg, does not jump and can be carried by one. Combination of price and quality. Not much play in the rip fence. But I was ready for this. There is a video on how to reduce it a little. Yuriy: use DeWALT DWE7485 less than month |
DEWALT DWE7485 91E75. Great saw for hobby and profit. Justifies the investment. It's necessary to refine the miter gauge and make a zero-clearance insert. Parallel stop. Compact (convenient for a small workshop). The original disc is only 24 teeth, but cuts perfectly. It is convenient to remove the riving knife. Angle stop play. The longitudinal groove tapers towards the exit (different widths at the entrance and exit). Oleg: use DeWALT DWE7485 few months |
DeWALT DWE7485 configurations
| Price for DeWALT DWE7485 | ||||
|---|---|---|---|---|
| DeWALT DWE7485 | from 25 103 ₴ | 29 offers | |
 | DeWALT DWE7485RS | from 31 827 ₴ | 21 offer | |
My first personal machine. Before this, I was using the DWE560 handheld for baseboard work. After it broke, I decided to get a minimal machine for semi-circular work. The higher models with a 250-disc are quite expensive, and the Makita 2704 isn't far behind price-wise. What sold me on this saw was the fence. The table is surprisingly flat, and you can make do with the parallel fence, and most issues can be resolved on the spot. The only disappointment is the manual angle adjustment, and given that the blade tilts quite stiffly, the result isn't always predictable.