Gamdias TALOS E3 white
 |
 |
Relatively inexpensive case with good capacity and advanced equipment. This is a Midi Tower case with a set of pre-installed fans (three pieces with a diagonal of 120 mm). Regular turntables are combined with ARGB-backlight, which can be controlled using a button on the interface unit. The system unit has a glass lining in front and on the side of the main sidewall. Through the transparent walls, a beautiful view of the backlight and accessories opens up.
Gamdias TALOS E3 computer case supports the ability to install hardware resources with good performance. The platform has enough space to attach an ATX size motherboard. It will be possible to put any microprocessor using a cooling tower up to 160 mm high on the chassis. To ensure that the computer system allows you to run the most modern games, a multi-slot video card up to 300 mm long can fit inside the case. To stabilize the temperature of the hot chassis, an air cooling system based on fans and optimized ventilation ducts is used. This is a low-cost case with huge potential for building a compact, stylish and powerful computer.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Gamdias 2025 - new arrivals, bestsellers, and the most relevant models Gamdias.
Buy Gamdias TALOS E3 white
All prices 10 →| 2 399 ₴ |  | ||||
Корпус GAMDIAS TALOS E3 WH Mid-Tower PC Case 4712960136557 | 2 399 ₴ |  | |||
| 2 399 ₴ |  | ||||
| 2 399 ₴ |  | ||||
| 2 399 ₴ |  | ||||
For its price, it's a very good case. Pleasant in appearance. I purchased the black one. If it came without fans, I would buy it without and install ARCTIC. 1. Tinted glass. It allows the lighting to shine softly and doesn’t strain the eyes. Very pleasant to look at. 2. The design solution for the front cover of the case. Large slots for air intake. 3. Large feet with pads that don’t scratch the table and allow sufficient airflow for the PSU. 4. Good, reliable screws for securing the tempered glass. Rubberized, with large heads (even though magnets could have been used). 1. I wished for a 2-5mm deeper space for cable management under the side metal cover. 2. The bulbs on the top panel are dimmer. 3. A dust filter for the front fans. 4. More space to install the AIO radiator directly on the front panel under the front cover. (I installed the Deepcool Gamer Storm CASTLE 240 RGB V2 radiator at the front because it cooled the components by 4-5% more, but it was a hassle to screw the AIO bolts into the case holes.) 5. Rework the blades on the stock fans or reduce the speed by 5-10%. Too loud. (Overall, I have 5 TALOS E3 fans in the case + AIO) 6. The top dust filter is of low quality. It deformed when the PC heated up to 35-40 degrees. Now it has a wavy appearance.  Bіliy yurіy: use Gamdias TALOS E3 Black few months |
For its price, an excellent case. 1. Assembly quality. 2. Tempered glass with tinting (which makes the fan lighting appear soft). 3. Fans with lighting modes (there are plenty). Quiet enough. 4. Excellent ventilation. 5. Ability to control the lighting through both the motherboard and an external button. 6. Dust filters. 7. 7 fan slots. 1. There is no dust cover on the front. 2. The fans do not have speed control (but they are not noisy). Bіliy yurіy: use Gamdias TALOS E3 Black less than month |
Gamdias TALOS E3 configurations
| Price for Gamdias TALOS E3 | ||||
|---|---|---|---|---|
 | Gamdias TALOS E3 black | from 2 099 ₴ | 16 offers | |
| Gamdias TALOS E3 white | from 2 344 ₴ | 10 offers | |
