Konner&Sohnen KS 7HP-950A
 |
 |
Powerful heavy-duty motor cultivator with a wide grip and a powerful 4-stroke petrol engine for servicing land plots up to 1 hectare. It is positioned as a professional mechanized agricultural tool of the upper price category, designed for use in small farmer's fields, large vegetable gardens, gardens and large flower beds. A set of six saber-shaped forged steel cutters provide a cutting width of up to 115 cm and a depth of up to an impressive 36 cm.
Moreover, the cutters can be arranged in 4- or 3-knife versions, which makes it possible to change the depth of immersion of the knives. The motor-cultivator Konner&Sohnen KS 7HP-950A is equipped with an easily removable transport wheel and a high-quality manual starter. Despite its considerable weight (76 kg), it is easy to move it to the place of work, and the start-up takes less than a minute.
As a power plant, a single-cylinder 4-stroke KS 230 engine with a working volume of 208 cm³ and an impressive power of 7 hp was used. The overhead valve arrangement provides high efficiency, moderate noise levels, improved environmental friendliness and long engine life. The 3-speed transmission makes it possible to select the correct working speed or to move the cultivator away from the impassable area. A fuel tank with a volume of 3.6 liters is enough for 3.5-4 hours of work.
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Konner&Sohnen 2024 - new products, best sales and most actual models Konner&Sohnen.
Buy Konner&Sohnen KS 7HP-950A
All prices 25 →Культиватор бензиновый Konner&Sohnen KS 7HP-950A 000001647 | 25 999 ₴ |  | |||
Бензиновий культиватор KS 7HP-950A | 25 999 ₴ |  | |||
Культиватор бензиновый Könner & Söhnen (KS 7HP-950A) | 25 999 ₴ |  | |||
Мотоблок Konner&Sohnen KS 7HP-950A (7 л.с., 1050 мм) | 26 000 ₴ |  | |||
Культиватор Konner&Sohnen Ks 7HP-950A | 25 999 ₴ |  | |||
Wide and deep cultivation
The practical and reliable gasoline cultivator Konner&Sohnen KS 7HP-950A is designed for soil cultivation with different properties: sandy, clay, peat, calcareous. The model belongs to the middle price segment and has good features and a wealth of features. So, in terms of width and depth of 108x31 cm arable land, the unit surpasses many devices in this class. The machine is good not only in loosening, but also does an excellent job of planting and harvesting, cutting weeds, hilling and deep plowing. To fully use the full potential of the cultivator, it's easy — you just need to buy and install additional attachments. The cultivator received a powerful air-cooled KS 240 engine with 7 hp. with a volume of 212 cm3, as well as a gearbox with a chain and belt drive, providing 2 forward speeds and 1 reverse speed. For starter start of the motor, simplified mechanics with an exhaust cable are used. Unfortunately, the control handles can only be adjusted in height. In the same place, the clutch lever and ignition switch (left), as well as the gear lever (right) are mounted on the handles.
32 forged steel knives
For cultivation, a set of saber cutters with 32 knives (2 groups of cutters on each side) made of durable forged steel are used, which cope equally well with well-groomed and virgin soils. To protect the cutters from damage and stable running in a track, metal protective discs are installed in the end part of the shaft, which are included in the delivery. From above, the cutters are covered with a special safety shield, which further reduces the release of stony soil particles. A transport wheel with a convenient handle for moving is fixed on the front of the remote bracket, and at the back there is an opener (stop-limiter) that allows you to adjust the depth of loosening, and also acts as a parking leg. It should be noted that the model is not equipped with a pair of rubber wheels, but they can be ordered additionally.
- Model KS 7HP-950A — wheels not included
- Model KS 7HP-950S — 2 wheels (Ø42 cm) included
