ProfitM ESP2
 |
 |
ProfitM ESP2 | |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
Reliable and high-performance fruit dryer from a Ukrainian manufacturer. It can be used for harvesting a wide variety of traditional and exotic vegetables and fruits. It also allows you to quickly and efficiently dry medicinal and spicy herbs, whole and chopped berries, nuts, mushrooms, meat and fish. The robust and durable construction of the seven steel mesh trays, made of food-grade stainless steel, is designed for impressive quantities of products.
Quiet and reliable fan provides a stable vertical flow of warm air. For complete control of the drying process, there is a thermostat and an intuitive mechanical control system. In addition, the ProfitM ESP2 fruit dryer is characterized by a large internal volume (20 L) and a high power of the heating element (820 W), which, if necessary, provides a large amount of heat to quickly remove moisture.
It is positioned as a product of the upper part of the middle price category, intended for domestic use. Designed for users who prepare large quantities of food and want to have full control over the drying process to achieve the highest quality results. The mechanical control system with a rotary knob offers five temperature settings covering the range from 30 to 90 °C. For safe operation of the device, there is an emergency shutdown system in case of overheating.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog ProfitM 2025 - new arrivals, bestsellers, and the most relevant models ProfitM.
Buy ProfitM ESP2
All prices 88 →| 3 649 ₴ |  | ||||
Сушарка ProfitM ЕСП-02 слонова кістка ЕСП2 слоновая костьбн | 3 749 ₴ |  | |||
| 3 699 ₴ |  | ||||
Сушарка для продуктів PROFIT M ЕСП-02 сіра | 3 887 ₴ |  | |||
| 3 916 ₴ |  | ||||
0 0 3 3 |
I wanted to dry meat and mushrooms without any hassle. At first I looked at cheap models, but then I studied the topic and realized that cheap models have a bad thermostat and plastic meshes that break over time. I researched the Internet and found this model (although there are many modifications, I can see the whole series of such dryers). Cool. Even though it's heavy. There are also some shortcomings, for example, the last compartment is not airtight and allows moisture to pass through (drops from the meat that drip when drying). But it is well painted, so it is easy to clean without damage. However, dust from dried meat pours into the hole where the thermostat is. I have to dig it out. Although the temperature is set with a knob, it is quite accurate. I checked with a thermometer. The mesh is the perfect size in my opinion. It is not big, pieces of meat and mushrooms do not fall there, but it is large enough to easily wash off the remains of the product. And there are a lot of these leftovers, believe me. I'm very pleased with the model. But keep in mind, it is very bulky. High-quality materials, metal, but well painted, with a thick layer of paint, which allows you to wash it without any problems without fear of damaging it. Quite an accurate thermostat. Almost silent. I'm missing a timer. So that I set it to 12 hours, for example, and it stopped. This is not a problem when you make meat, as it takes a long time to cook. But this is a problem for vegetables and fruits, where the drying time is 4-8 hours, and you can’t always leave it overnight. They could make the bottom tray sealed so that moisture and dust from the products do not spill there. Well, the dryer itself weighs quite decently.  Anton Ch: use ProfitM ESP2 more than year |
Harn model, ale and nuances In first black, having robbed a metal dryer, having read reviews about those, how plastic trays crack and did not lose. Dyesno metal yakіsny, everything is covered with equal powder coatings, there are no third-party smells. The sieve on the trays is small, the berries do not fall through, so the very thing is like fresh greens. The height of the sides is sufficient to dry the tomato halves. Even simpler management: wimika and temperature controller. A wide range of available temperatures (up to 90 degrees, which is rare and preferable dryers with a metal case). Great is the pressure and the number of trays. Hanging is enough to wind plums and pears. Cope with any products. The top cover can be opened with a flange under a drawstring, so you can fit the corrugation and you will be happy. Over 3 years, 5 out of 7 trays started to rust, even though I didn't use abrasives. Because of this, everything began to stick and rust stains are left on the products. However, the manufacturer sells trays separately, if anyone is interested. I changed the switch 4 times, it just "melts" from high temperatures during 2-3 sessions of 8 hours each. It's good that it can be easily replaced (with clips) and it's not expensive. It wouldn't turn on when purchased, it turned out it wasn't fully assembled, and I had to disassemble it and connect the power cables to the fan and thermostat. Also, pay attention to the stamping of the bottom tray, mine came completely bent and the air passed only from one side and got stuck in the body (replaced after contacting the manufacturer). The weight is noticeable, after all, it is metal. The fan works quite loudly. Uneven heating and you need to constantly rearrange the trays (bottom ones to the top, top ones to the bottom), but that's the nature of a dryer with a fan and bottom heating. Aleksandr Ch: use ProfitM ESP2 more than year |
I have been using since August 2020. Completely satisfied with the dryer. When the place in the freezer ran out, I began to dry: garlic, onions and greens, tomatoes, eggplant, zucchini, celery root, dill, parsley, parsley root, lettuce peppers, carrots, beets, apples, pears, plums. In fact, to cook borsch, I only take raw potatoes and cabbage (although they can also be dried). Like everything Did not find  Irina Buyvol: use ProfitM ESP2 few months |
