Stark RH 950 Profi (140060015)
 | 2 702 ₴ Buy!  Перфоратор Stark SDS-plus RH 950 Profi 63054Sertan.com.ua3 year with us (Kyiv) Warranty: 24 month Report |
 |
Close
Stark RH 950 Profi
Operating modes:hammer drilling, without a hit, chiselling
Power:950 W
Number of strokes:5500 bpm
Idle speed:1300 rpm
Cartridge type:SDS+
Power supply:mains (230 V)
Weight:2.8 kg
All specifications
Specifications RH 950 Profi
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Stark 2024 - new products, best sales and most actual models Stark.
Before buying always check characteristics and configuration of product with online store manager
Catalog Stark 2024 - new products, best sales and most actual models Stark.
Series Stark Profi
hammer drilling, 5500 bpm, without a hit, 1300 rpm, chiselling, 850 W, 2.7 J, weight 2.8 kg
hammer drilling, 4500 bpm, without a hit, 880 rpm, chiselling, 1110 W, 3.7 J, weight 6 kg
hammer drilling, 5500 bpm, without a hit, 1300 rpm, chiselling, 920 W, 2.7 J, quick cartridge change, weight 2.8 kg
I bought it in May 2016: after 3 days the button burned out, I waited two weeks under the guarantee, I spat I bought it for my money, in September the anchor and the bearing were covered, they didn’t take it for warranty repairs, they said it was my fault, I drilled only 6, I didn’t strain it once again, all the breakers did the work with another punch No Very very poor quality use Stark RH 950 Profi few months |
Add Review
We recommendCompare using chart →
hammer drilling, 4850 bpm, without a hit, 1000 rpm, chiselling, 1100 W, 2.6 J, weight 3 kg
hammer drilling, 5200 bpm, without a hit, 1100 rpm, chiselling, 1100 W, 3 J, weight 3 kg
hammer drilling, 5500 bpm, without a hit, 1300 rpm, chiselling, 1300 W, quick cartridge change, weight 3.2 kg
hammer drilling, without a hit, 1300 rpm, chiselling, 1100 W, 2.8 J, quick cartridge change, weight 3.4 kg
hammer drilling, 5500 bpm, without a hit, 1300 rpm, chiselling, 920 W, 2.7 J, quick cartridge change, weight 2.8 kg
hammer drilling, 4000 bpm, without a hit, 1300 rpm, chiselling, 1350 W, 3 J, weight 3.4 kg
hammer drilling, 5200 bpm, without a hit, 1300 rpm, chiselling, 1350 W, 3 J, quick cartridge change, weight 3.5 kg
hammer drilling, 4500 bpm, without a hit, 1100 rpm, chiselling, 920 W, 2.7 J, weight 3.1 kg
hammer drilling, 5800 bpm, without a hit, 1050 rpm, chiselling, 1200 W, 2.8 J, weight 3.3 kg
hammer drilling, 5800 bpm, without a hit, 1050 rpm, chiselling, 1100 W, 2.8 J, quick cartridge change, weight 3 kg
hammer drilling, 5800 bpm, without a hit, 1050 rpm, chiselling, 1100 W, 2.8 J, weight 3.3 kg