from 1 841 ₴rotary engraver, 300 W, 32000 rpm, flexible shaft, weight: 0.7 kg
from 1 454 ₴2200 W, from 50 °C, before 630 °C, 550 L/min, stepless t control, stepless airflow control, display, weight: 1700 g, case, scraper, nozzles, 4
from 2 399 ₴chainsaw, electric saw, 2800 W, canvas 400 mm, chain pitch 3/8 ", weight 5.3 kg
from 3 597 ₴stationary, planing: width 110 mm, depth 3.5 mm, 1300 W, stationary
from 2 278 ₴plastic pipe soldering iron, 2000 W, 2 powers, from 50, before 300 °C, nozzles x6, 20, 25, 32, 40, 50, 63 мм, stand, pipe cutter, screwdriver, tape measure, gloves, case
from 2 706 ₴hammer drilling, 4800 bpm, without a hit, 1300 rpm, chiselling, 1200 W, 3.8 J, weight 3.2 kg
from 790 ₴drill, gun, 550 W, 3300 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
from 3 687 ₴vertical, 1800 W, before 30000 rpm, stroke: 40 mm, soft start, milling cutter, fine height adjustment
from 2 115 ₴polishing, 1800 W, saw blade 180 mm, 600 – 3000 rpm, speed controller, additional handle
from 2 309 ₴950 W, before 3000 stroke/min, stroke: pendulum action, case, weight: 2 kg
from 3 200 ₴stationary electro, network, 800 W, 2800 rpm, disk: 180 mm, глубина реза до 35 mm, water cooling, bottom feed
from 715 ₴chameleon helmet, blackout: from 9 DIN, before 13 DIN, turning on filter: 66.7 ms, 480 g
from 1 560 ₴paint sprayer, corded, 700 W, consumption 0.8 L/min, nozzle 1.8, 2.6 mm, storage tank: 800 mL
from 6 568 ₴2020 W, 47 J, 1900 bpm, cartridge: SDS Hex, 14 kg
from 1 327 ₴2200 W, from 50 °C, before 610 °C, 550 L/min, stepless t control, weight: 1700 g, case, scraper, nozzles, 4
from 1 749 ₴chainsaw, electric saw, 1300 W, canvas 350 mm, chain pitch 3/8 ", keyless, weight 3.6 kg
from 2 358 ₴stationary, planing: width 82 mm, depth 3 mm, 1100 W, stationary, dual dust out system
from 1 593 ₴1100 W, from 50, before 300 °C, nozzles x6, 20, 25, 32, 40, 50, 63 мм, stand, screwdriver, case
from 3 650 ₴hammer drilling, 4000 bpm, without a hit, 800 rpm, chiselling, 1750 W, 5.5 J, weight 5.5 kg