Heat without intermediaries: TOP-5 excellent infrared heaters

Inexpensive and reliable climate products manufactured by Network Selects Ltd. under the trademarks UFO and Ergo is well known to the domestic consumer and is in constant demand. Ergo HI-1620 infrared heater is a worthy device for primary or additional heating of cold areas in an apartment, private house, office, workshop, garage and work site. Due to the fact that the device transfers heat not to the air, but to nearby objects, the heater does an excellent job of heating not only indoors, but also on semi-open terraces, where the operation of other types of devices ( convectors, oil radiators, fan heaters) will not be so effective. The model is assembled in a silver metal case with black end inserts and can be used as a wall or floor heater. Depending on the chosen mode of operation, you can use the included wall mounting kit or a portable leg stand with telescopic tube. The adjustable light aluminium alloy stand allows the infrared emitter to be mounted at a height of up to 2 m and makes moving the 5 kg heater a simple task.

The device is equipped with a quartz-type heating element with a reflector and a rotary mechanical thermostat, which allows you to set a comfortable heating temperature. The maximum power of a quartz lamp of 2 kW is enough to service a room up to 20 m2. The heater has a lifespan of approximately 4,000 hours, after which the lamp can be replaced. A large-mesh wire grate covering the quartz lamp from the front side prevents burns in case of accidental contact with the hot surface of the heater. The built-in protection against overheating, protection against ingress of foreign objects (IP10 class) and class I electrical protection are responsible for the safe operation of the device. When connecting the heater to the mains with a 2 m long power cable, do not use an extension cord. The manufacturer sets a 12-month warranty period for the device.

The manufacturer of the electric infrared heater Ballu BIH-LM-1.5 positions this model as a mobile "heat gun". The device is designed for rapid heating of such local production areas as service stations, workshops, construction sites, small industries, warehouses and utility rooms, as well as for accelerated drying of walls and any painted surfaces. Besides, the model perfectly is suitable for heating of summer residences, cottages, arbors, verandahs, terraces and open areas. The lamp unit, installed on the floor on removable bent tubular legs, provides comprehensive and efficient heating even in conditions of strong wind and frost. The compact body of the heater weighing 3.5 kg has a durable steel structure with an anti-corrosion coating and is equipped with a convenient carrying handle, and the working area of the emitters is closed from contact with a chrome-plated fireplace grate. With the support legs removed, it is also possible to mount the device on the wall, where it will work most efficiently when removed from the object at a distance of up to 2 m.

The heating elements of the device are 3 quartz lamp emitters with a total power of 1.5 kW, designed for a maximum heating area of 15 m2. According to subjective sensations, the thermal radiation of the heater is comparable to the level of heating that other types of electrical appliances provide with twice as much power, which gave the manufacturer grounds to declare an approximate area of the serviced area of 25 m2. The device does not have a control thermostat, but there are two switches on the side surface of the case, allowing you to set one of the 3 heating levels (0.5 / 1.0 / 1.5 kW). Due to the upward movement of air through the heater, double heating is carried out by infrared radiation and convection. The model is equipped with electrical protection class I, water protection class IP21, which allows you to use the device outdoors in dry weather, as well as an automatic shutdown when tilted and overturned. Unfortunately, the design does not provide protection against overheating. The manufacturer gives a 2-year warranty for an infrared heater, and 6 months for quartz tubes.

The floor carbonic infrared heater Zenet ZET-503 is an advanced heating device of a new generation. The model is designed for rapid heating of premises with thermal radiation, as close as possible to the solar spectrum. The vertically oriented plastic case of the device is mounted on a disk stand, relative to which it can rotate in the angular range of 180°. This method of operation allows you to quickly distribute heat throughout the area of \u200b\u200bthe room. The front mesh grill covering the heat emitters partially protects against accidental contact with heated elements.

The heating elements in the device are 2 vacuum quartz tubes, inside of which a spiral of carbon-containing fiber is enclosed. These heaters with a total power of 1.2 kW have a high heat output, which, with small dimensions of 65x35x16.5 cm, successfully replaces more powerful and energy-hungry convectors and oil heaters. The device has 2 power levels, to set which you need to turn the dial on the top of the case. This model did without a thermostat, but was equipped with an overheat protection temperature sensor and a shutdown function in case of a fall or excessive tilt. The tightness of the heating tubes protects them from moisture penetration, which makes it safe to use the devices in a damp room. Another advantage of the device is the preservation of a healthy level of humidity in the room: after all, infrared radiation does not heat the air, but objects located at a distance of 3-4 m.

The elegant floor heater VENTOLUX COMFORT 2000 BK with an infrared heat emitter is made in the form of a high tower with a support stand. The durable aluminium case of the model has considerable overall dimensions of 96x40.5x35.7 cm, which is why it is better to place it either near the wall or in the corner of the room. The heat emitter in the device is a carbon fiber enclosed in a quartz tube. The heating element is equipped with a reflector and is closed from the outside with a chromium-nickel coated grille. Such a heater has a long life cycle of at least 10 thousand hours, as well as a high calorific value of 98%, surpassing other types of heaters in this indicator. We can say that almost all the energy of an infrared heater without loss is converted into thermal radiation.

The heater with a 2 kW heater is an effective solution for heating residential, office, utility and storage rooms up to 20 m2, as well as for zone heating of semi-open and open areas in the fresh air. The model is equipped with a 2-stage power selector and a Spanish Tecasa thermostat, which allows smooth temperature control. The built-in overheating protection function and automatic tip-over shutdown will prevent a fire in time, and the water ingress protection protects the device from short circuit. In addition to the classic black model, the manufacturer offers several different color versions of the device that will satisfy the aesthetic needs of consumers. The electric heater is manufactured at the company's factory in Turkey and comes with a 3-year manufacturer's warranty.

Ceiling infrared (IR) heater Timberk Warmth Booster TCH A1N 2000 is designed for fixed installation in residential, commercial and utility rooms up to 20 m2. At the same time, the degree of protection IP24 allows the operation of the device in wet rooms. Installing the device under the ceiling at a height of up to 3.5 m removes all restrictions on its placement: after all, the height of the room clearly determines the distance to the heating objects, low convection does not raise heated dust, does not pollute the air and does not burn oxygen, and there are no barriers. The reinforced case of the device with overall dimensions of 126.5x28.3x6.4 cm is made of thick sheet metal, which increased the weight of the structure to 10.1 kg. Ease of installation (brackets included) does not require disassembly of the housing to connect the heater, and the ceiling mount is located away from the hot working surface of the emitters.

Due to the special geometry of the surface with a “jagged” relief, the micathermic plates, which receive heat from 2 kW heaters, have an increased radiation area. And an efficient reflector with a reflectivity of over 90% carries the generated heat to its destination with almost no loss. As add-ons, which are purchased separately, it is possible to connect a TMS 09.CH/TMS 11.CH room thermostat, as well as a TMS 08.CH remote control, to the device. This upgrade makes the adjustment of settings more comfortable, allows you to control 2 levels of heating power and set the time to turn off the device using a timer (13 hours). The infrared heater is provided with a one-year service warranty from the manufacturer.