DWT WS 13-180 D (743347)
 |
 |
DWT WS 13-180 D | |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
Classic semi-professional angle grinder. It differs from household models by a more powerful electric motor (1300 W), a protective D-shaped bracket on the rear handle and improved ergonomics, which, in addition to rubberized inserts, also provides three mounting holes for an additional rubberized handle. This model is designed for cutting hard materials (steel, cast iron, non-ferrous metals, natural and artificial stone, concrete) and for cleaning and grinding various surfaces.
As an abrasive tool in the DWT WS 13-180D grinder, disks with a diameter increased to 180 mm or disk / bowl-shaped wire brushes with a diameter of up to 75 mm are used. The spindle speed is up to 8000 rpm, which, with an increased disc diameter, gives an excellent linear speed of the cutting edge and, as a result, a high cutting speed. The gearbox housing is made of a highly heat-dissipating aluminium alloy.
The lower part of the housing, which houses the motor and the entire electrical part, is made of high-strength and impact-resistant plastic. Motor and bearings protected from dust. The start button has protection against accidental start, and the protective cover is easily fixed in any position that is convenient for work and safe (360 degree rotation range). The tool comes with a two-year warranty.
Before buying always check characteristics and configuration of product with online store manager
Catalog DWT 2024 - new products, best sales and most actual models DWT.
Low-cost solution
Not every master is ready to shell out a tidy sum for a tool of a prestigious brand, so many choose inexpensive grinders, which include the DWT WS 13-180 D. Although this angle grinder does not shine with power (1300-watt motor gives 800 watts of useful power), but this is quite enough for relatively simple tasks.
A simple tool for a simple job
The characteristics of the motor, the gear ratio and the dimensions of the protective cover allow the use of cutting discs with a diameter of 180 mm, as well as grinding wheels of the same size and brushes up to 75 mm in diameter. Therefore, the capabilities of the DWT angle grinder are quite enough to cut pipes or corners for the manufacture of metal structures, remove rust from them or clean the seams after welding — that is, to cope with all the work that needs to be done to build a fence, gate or some kind of shelving from metal.
The grinder DWT WS 13-180 D is light (3.6 kg), and therefore it is convenient to work with it. One of the features of this model is the D-shaped bracket on the rear handle. It is useful in terms of protecting your fingers, but sometimes it can get in the way during work if you need to get into some hard-to-reach places.
The smart choice for the home workshop
DWT angle grinders are good, inexpensive entry-level tools to use in the home workshop or on the construction site. Among them there are compact "babies" for 125 mm discs, like the DWT WS 08-125, and such powerful and large devices as the 2200-watt angle grinder DWT WS 22-230 T.
If you have no prejudice towards low-cost DWT equipment, then the products of this brand should be considered when choosing power tools and equipment for home, summer cottages and garages.
