Forte SG-750B

Durable brass nozzle

The 750 W airbrush is capable of creating a pressure of 0.2 bar, which is enough for both fine work and plaster painting. The nozzle and needle here are made of brass, which protects them from corrosion and significantly increases their service life compared to steel counterparts. It should be noted that the nozzle has a relatively small diameter of 1.5 mm, which accounts for the low throughput of the device at 180 mL/min.

capacious tank

The device is equipped with a liter tank for paint, which is enough for about 10 m2 (subject to painting in one layer). It is made of stainless steel, strong and durable. The machine can carry out painting with vertical, horizontal stripes and diagonally. At the same time, the spray intensity can be increased or decreased with a threaded regulator located at the base of the air hose. Some users have complained about a loose rubber ring on the hose causing it to fly out of the compressor from time to time. Also, in some models, there is a slight play at the junction of the tank and the gun. However, all this is offset by the relatively low price of the product.