Hotpoint-Ariston ABS VLS PW 80 V
Videos 3 | Outdated Product 15 327 ₴ Type: storage; Energy source: mains; Tank volume (L): 80; Power source: 230 V; Power consumption (W): 2500; Magnesium anode; Heating elements: 2; wet heater; thermostat; overheat protection; frost protection; dry heating protection; electrical protection (RCD); Pipe connection: installation dependent |
Hotpoint-Ariston ABS VLS PW 80 V | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Which is better: wet or dry heating element in a water heater?Learning the design features, pros and cons of "wet" and "dry" heating elements in water heaters
Detailed FAQ on storage water heatersWe answer the most common questions regarding the installation and operation of storage water heaters
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Hotpoint-Ariston 2024 - new products, best sales and most actual models Hotpoint-Ariston.
Before buying always check characteristics and configuration of product with online store manager
Catalog Hotpoint-Ariston 2024 - new products, best sales and most actual models Hotpoint-Ariston.
User reviews 105 | 29 19 21 30 |
I do not recommend, a terrible problematic model. Flat, cute model A month after the connection, the heating element flew, with grief in half, after a month and a half, they changed the heating element under warranty. Worked for 2 years after that and yesterday the tank leaked. The master said - in the trash. use Hotpoint-Ariston ABS VLS PW 80 V month or more i recommend it don't buy |
A small child has appeared in the house, and at night you can’t wait for hot water from the tap. Therefore, I began to look for a compact storage boiler with normal electronic control. This model is perfect in every way. Compact and flat body. For me it was important, because otherwise it did not fit in size. Looks modern. Two-stage power adjustment. In fact, the boiler can operate in two modes: slowly (about 3 hours) and economically heating in the first stage or fast mode, in which the entire volume is heated for an hour and a half. This adjustment saves energy when rapid heating is not needed. Precisely maintains the desired water temperature. If you set it to 50 degrees, then the output will really be 50 plus or minus one degree (specially checked with a good mercury thermometer). In this sense, electronic control is a pleasant thing. A special mode that turns on periodically and destroys bacteria in the water. Indeed, even when not particularly used, there was no smell of stagnant water. There are all protective systems necessary for safe operation. Made in Italy. 5 years warranty. Quite expensive compared to competitors, but you get real European quality for this money. Two months later, the electronics of the control system failed. The warranty master said that most likely it came from power surges in the network. After the repair, I installed protection (voltage cut-off) and indeed, at least once a month it works. use Hotpoint-Ariston ABS VLS PW 80 V month or more |
I do not recommend, as this is not Italian quality, as it was 5 years ago. Production Russia. Good design Slow heating. Drip. I didn’t expect from Ariston, since I’m not the only one who has such a problem. The board burned down several times ... and as a result, a year later, it dripped with a penny. use Hotpoint-Ariston ABS VLS PW 80 V month or more |
3 out of 105 user review(s) shown
10 more user review(s)
Video reviews
Additional features water heater Hotpoint-Ariston ABS VLS PW 80 V:
- Silver inner lining of the tank for corrosion protection and water purification
- Fault self-diagnosis
- Model ABS VLS PW 30 V — tank volume 30 L
- Model ABS VLS PW 50 V — tank volume 50 L
- Model ABS VLS PW 100 V — tank volume 100 L