Hotpoint-Ariston SG 200 V
Outdated Product 20 980 ₴ Type: storage; Energy source: mains; Tank volume (L): 200; Power source: 230 V; Power consumption (W): 2600; Magnesium anode; Heating elements: 1; wet heater; overheat protection; safety valve; Pipe connection: bottom; Dimensions (cm): 147.8х50.5х45.2; |
Hotpoint-Ariston SG 200 V | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Which is better: wet or dry heating element in a water heater?Learning the design features, pros and cons of "wet" and "dry" heating elements in water heaters
Detailed FAQ on storage water heatersWe answer the most common questions regarding the installation and operation of storage water heaters
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Hotpoint-Ariston 2024 - new products, best sales and most actual models Hotpoint-Ariston.
Before buying always check characteristics and configuration of product with online store manager
Catalog Hotpoint-Ariston 2024 - new products, best sales and most actual models Hotpoint-Ariston.
1 2 2 5 |
There are a huge number of low-cost storage boilers on the market now, but I would not advise chasing the lowest price. This is especially true for domestic water heaters, which often have problems with the enamel coating of the inner tank. In inexpensive models, it is always made from sheet steel of relatively small thickness. Therefore, when the enamel cracks (it happens much more often than we would like), water gets to the metal and only the last line of defense remains - the magnesium anode. And it is often, densely changed at the wrong time, if at all. A simple, reliable water heater that provides the functionality I need from a time-tested manufacturer. Yes, it is made in China, but iPhones are also not made in America, so quality claims begin where control over it weakens. Apparently, Hotpoint-Ariston is all right with this. He has standard dimensions, a diameter of 44 centimeters, hung on the bathroom wall above the toilet. It has the most primitive control system with a thermomechanical regulator. But, it should be noted that it is the most reliable. This technology has been polished so that such regulators almost never break. And, yes, unlike modern electronics, such a regulator does not care about the magnitude of the voltage in the network and its (voltage) dancing. A one and a half kilowatt heater warms up the volume of the tank to 60 degrees in about 105-110 minutes (artesian water, with a temperature of +14 Celsius at any time of the year). Water with such a temperature is enough for a shower for two people without any problems, and it also remains in the kitchen. Inside the tank is protected by high-quality enamel, a large magnesium anode is also available. A little noisy when heated, but with closed doors it does not bother anyone. Again, when heated, a little drips from the safety valve, people write that this is normal. |
1 out of 10 user review(s) shown
9 more user review(s)
anonim
10 August 2014, 14:03
Световой индикатор постоянно горит и не отключается #
Добрый день! Купил SG 50. Установил индикатор температуры на 75% от максимального и закрыл крышку. После включения в сеть световой индикатор загорелся. После 8 часов работы водонагреватель воду нагрел, но индикатор не тухнет. Я понимаю, что в аппарате стоит автоматический термостат и при нагреве до требуемой температуры световой индикатор должен потухнуть.
Так должен ли потухнуть световой индикатор или он всегда горит, когда водонагреватель в сети? Спасибо за дельный ответ.
Так должен ли потухнуть световой индикатор или он всегда горит, когда водонагреватель в сети? Спасибо за дельный ответ.
3 out of 9 question(s) shown
6 more question(s)
Additional features water heater Hotpoint-Ariston SG 200 V:
- Thermometer