Sprut MRS3 (112109)
Sprut MRS3 centrifugal | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Sprut 2024 - new products, best sales and most actual models Sprut.
Before buying always check characteristics and configuration of product with online store manager
Catalog Sprut 2024 - new products, best sales and most actual models Sprut.
The pump worked for five years. He supplied water to the house from a well and watered the garden through a drip. He worked quietly. I worked 15 hours a day in the third year and replaced the oil seal. Lying on bricks in a well. The stator was rotten from below (the cooling housing was painted silumin). As a result, the winding burned out. Many SPRUT service centers have been opened - but none of them work! It is impossible to buy a stator. You can rewind it, but there is no thermal protection and there is no silumin housing. use Sprut MRS5 more than year |
The pump is more than powerful. 55 meters of pressure, 100 liters per minute, 6 cubic meters per hour. I haven’t measured all this exactly, but I feel that it’s true. Before that I used the domestic BCN-0.75 to water my garden. This one is much more powerful .I feel it at the outlet of the water from the hose - like a fireman, this pressure directly pushes me back... With three shell sprayers, on a 4m pipe, I water a 5m x 9m square in one go. And this is at a distance of 50 meters from the place fence! strawberries, currants and vineyards too. There is plenty to water constantly; in the Kharkov region it rarely rains. The temperature sometimes reaches 35 in the shade. And this has been the case for six years. I bought this pump, or rather, a pumping station with this pump, in the city of Kupyansk back in 2010 for 1200 UAH. With all the stickers and documents with a guarantee from the company “Pumps Plus Equipment”. And I’ve been using this pumping station for six years now. I just changed it hydraulic accumulator (this tank is 24 liters). Near the flange with six bolts, air began to leak. Before that, I changed the pressure switch and bulb. Now I was looking on websites how to repair the pump itself. Where can I find a repair kit for the pump itself (those five wheels with all the gaskets and seals ).The pump pumps, but there is some kind of rustling noise. Maybe it’s in the pump itself with its wheels. Or maybe it’s trivial that the electric motor bearings need to be changed. I went to this site and decided to write a review I did not find any shortcomings in the operation of the pump itself, despite such intensive use. And under difficult conditions, it stands in a shaft 2.1 meters deep. With constant humidity and a temperature difference from +2 degrees in winter to +30 in summer. use Sprut MRS5 month or more |
Add Review
anonim
20 February 2019, 13:30
Совместимость деталей насосов Sprut #
Дорогие редакторы сайта ek.ua, недавно столкнулся с потребностью замены секций в системе всасывания насоса Sprut MRS-5. Во время поиска детали возник вопрос: одинаковые ли параметры секции диффузора и рабочего колеса и вала данной модели и насоса Sprut MRS H5 и должны ли возникнуть проблеммы с установкой секций от MRS H5 на MRS-5?
Additional features surface pump Sprut MRS3:
- Maximum ambient temperature — 40 °C
- Model MRS3/AISI316 — Equipped with AISI316 stainless steel shaft
We recommendCompare using chart →