Reciprocating saw Stanley FatMax FME360

Buy Stanley FatMax FME360


	Пила шабельна Stanley FME360 Ua Виробник: Stanley / Тип: шабельна пилка / Конструкція: Ручна / Потужність, Вт: 900 / Робота від акумулятора: немає / Робота з... moreметалом: є Цифра8 year with us (Kyiv) Report	4 018 ₴ Buy in shop

	Пила шабельна мережева STANLEY FATMAX FME360 Опис пили шабельної мережевої STANLEY FATMAX FME360 Пила шабельна мережева STANLEY FATMAX FME360 – це ідеальний вибір... moreдля любителів DIY і професіоналів, які шукають потужний та практичний інструмент. Завдяки високій потужності двигуна у 900 Вт і інноваційним технологічним рішенням, ця пила стане надійним помічником у виконанні різноманітних завдань. Вона підходить для різання деревини, пластику ASVi.com.uaLess than year (Kyiv) Report	4 478 ₴ Buy in shop

	Пила шабельна мережева STANLEY FATMAX FME360 Esco.ua2 year with us (Kyiv) Warranty: 36 month manufacturer Report	4 479 ₴ Buy in shop

	Пила шабельна мережева STANLEY FATMAX FME360 Споживана потужність 900 Вт; Частота ходів 0 - 3200 ход/хв; Вага 3.5 кг Sertan.com.ua4 year with us (Kyiv) Report	4 479 ₴ Buy in shop

	Пила шабельна мережева Stanley FatMax 900 Вт (FME360) MAUDAU2 year with us (Kyiv) Report	4 479 ₴ Buy in shop

20 more offer(s)

Series Stanley FatMax

Stanley FatMax FME360

from 3 671 ₴

reciprocating, electric saw, 900 W, weight 3.5 kg

Stanley FatMax 2-14-567

from 819 ₴

for sheet metal, left, cutting thickness 1.2 mm, long continuous cut, spring, lock, scissors length 250 mm

Stanley FatMax 0-43-625

from 1 629 ₴

spirit level, length: 60 cm, 3 vials, 180°, 90°, accuracy: 0.5 mm/m, magnetic base

Stanley FatMax SFMCD721M2K

from 10 457 ₴

drill driver, gun, brushless motor, 600/2100 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, motor brake, power supply: battery, 18 H, 2, case

Stanley FatMax FMEG225VS

from 3 175 ₴

angle grinder, 1100 W, saw blade 125 mm, 3000 – 11000 rpm, speed controller, additional handle

Stanley FatMax FME670K

from 3 145 ₴

2000 W, from 65 °C, up to 650 °C, 550 L/min, stepless t control, weight: 900 g, case, scraper, putty knife, nozzles, 4

Stanley FatMax FME190

from 5 906 ₴

plaster mixer, 1600 W, 460/750 rpm, spindle: M14, 2 speeds

Stanley FatMax 6-PHT350

from 1 746 ₴

stapler, contact, impact, built-in knife, brace: ширина до 10.6 mm, length up to 12 mm

Stanley FatMax FME630K

from 4 496 ₴

planing: width 82 mm, depth 2 mm, 750 W, double-sided knives, shoe, dual dust out system

Stanley FatMax FMST1-75769

from 2 679 ₴

box, metal, metal locks, size: 23", 590x293x222 mm

Stanley FatMax FMHT0-83247

from 1 236 ₴

clamp, F-clamp, clamp: 800 mm, depth 80 mm, an effort 6.35 kN, body cast iron

Stanley FatMax 0-15-252

from 399 ₴

flush cut, wood, teeth: 13 TPI, length 250 mm

Stanley FatMax FMMT82685-1

from 7 200 ₴

socket heads 21 pcs, 6-points, in box: ratchet wrench, tap wrench, extension, universal joint, case

Stanley FatMax FMHT51367-2

from 2 669 ₴

roofing, 624 g, metal, length 410 mm

Stanley FatMax FMHT0-80541

from 2 372 ₴

6 items, pliers

Stanley FatMax FME650K

from 5 196 ₴

oscillating multi-tool, 300 W, 22000 number/min, weight: 1.53 kg

Stanley FatMax FME1250K

from 6 851 ₴

hammer drilling, 4100 bpm, without a hit, 850 rpm, chiselling, 1250 W, 3.5 J, weight 5.4 kg

Stanley FatMax GR100R

from 2 598 ₴

200 W, kernel: 11.3 mm, heat: in 1 min, up to 190 °С, supply: 25 g/min, temperature adjustment, heat indicator

Stanley FatMax FMHT82563-0

from 3 161 ₴

multimeter, fast. voltage: 600 В, aC voltage: 600 В, fast. current: 10 А, resistance: 10 MΩ, autorange, NCV

Stanley FatMax FME301

from 4 897 ₴

circular, electric saw, 1650 W, bar/blade 190 mm, weight 3.9 kg

Electric saw for building a wooden house

The power of the Stanley FatMax FME360 electric saw is not particularly impressive. For a saw, 900 W is not so little, but there is nothing special to brag about. The fact is that this tool was developed for the needs of American carpenters and builders. Therefore, it is designed to work with those standard sizes of boards, beams, plywood and finishing materials that are used in overseas frame housing construction. On the other hand, a slight lack of power is compensated by a slightly increased frequency of strokes. At maximum speed (when the key is fully pressed), the saw blade can make up to 3200 strokes / min. The increased speed helps to cut materials like drywall boards neatly and cleanly, without leaving behind defects and chips. But it should be taken into account that at medium and high speeds the tool vibrates intensely (vibrations are the constant "companion" of reciprocating saws, that's how they are arranged, but in this model this feature appears a little "brighter" than we would like). Therefore, it is better to immediately buy work gloves with anti-vibration protection.

Replacement - no keys, selection - no problem

The tool is equipped with a mechanism for keyless blade replacement. As with many modern reciprocating saws, the blade can be inserted into the chuck with the teeth up or down, depending on how you guide the saw as you work. The manufacturer allows the use of files with a blade length of up to 305 mm, but at the same time emphasizes that the maximum sawing depth is limited to 275 mm. This tool accepts all L-shank blades, allowing you to purchase not only original Stanley accessories, but also tooling from other manufacturers.

FatMax series - more than just Stanley

Stanley products are positioned as an "intermediate link" between Black & Decker household tools and DeWALT professional tools (all three manufacturers are part of the same corporation). And the FatMax series, to which the Stanley FatMax FME360 reciprocating saw belongs, is considered something of a “top” model line. It is designed for users who work in a home workshop or make repairs with their own hands, but make slightly higher demands on the tool.