Sturm Professional RH2592P
 |
 |
Close
Sturm Professional RH2592P
Operating modes:hammer drilling, without a hit, chiselling
Power:1200 W
Impact energy:3 J
Number of strokes:4400 bpm
Idle speed:1100 rpm
Cartridge type:SDS+, key
Power supply:mains (230 V)
Weight:3.1 kg
A network puncher with an average power (1200 W) and an average impact force (3 J). It can work in different modes: drilling, drilling with impact or chiselling (with or without turning the tool). The tool is equipped with a disengaging clutch, which serves as a "fuse" in case of equipment jamming. The Sturm Professional RH2592P perforator chuck complies with the SDS + standard (all types of drills, drills and other attachments of this type can be used). Instead, you can install a regular keyed chuck if you need to work with equipment that has traditional cylindrical shanks. The tool comes with a plastic case, an additional handle with a depth gauge, three drills, a chisel and a pick.
All specifications
Specifications Professional RH2592P
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Sturm 2025 - new arrivals, bestsellers, and the most relevant models Sturm.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Sturm 2025 - new arrivals, bestsellers, and the most relevant models Sturm.
Series Sturm Professional
inverter, welding: MMA, welding current: from 20 A, up to 235 A, электрод до 5 mm, power supply: 230 В, from 160 В, display
hammer drilling, 4300 bpm, without a hit, 850 rpm, chiselling, 1800 W, 6.5 J, weight 5 kg
drill, gun, 1050 W, 2800 rpm, 1 speed, cartridge: key, Ø 13 mm, impact mode, reverse, power supply: mains (230 V)
950 W, from 800 stroke/min, up to 3000 stroke/min, stroke: pendulum action, dust blower, LED light, weight: 3.1 kg
inverter, welding: MMA, welding current: from 20 A, up to 310 A, электрод до 5 mm, power supply: 230 В, from 160 В, display, снижение напряжения VRD
hammer drilling, 4400 bpm, without a hit, 1100 rpm, chiselling, 1200 W, 3 J, weight 3.1 kg
drill, gun, 1050 W, 2800 rpm, 1 speed, cartridge: keyless, Ø 13 mm, impact mode, reverse, power supply: mains (230 V)
semi-automatic inverter, welding: MMA, MIG/MAG, welding current: from 20 A, up to 310 A, электрод до 5 mm, wire: from 0.6 mm, up to 1.2 mm, power supply: 230 В, display
polishing, 1600 W, saw blade 180 mm, 500 – 3000 rpm, speed controller, additional handle
drill, gun, 1150 W, 3200 rpm, cartridge: key, Ø 13 mm, impact mode, reverse, power supply: mains (230 V)
inverter, welding: PLASMA, welding current: from 15 A, up to 45 A, power supply: 230 В, from 160 В
drill driver, gun, 550 W, 400/1600 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
inverter, welding: MMA, welding current: from 20 A, up to 275 A, электрод до 5 mm, power supply: 230 В, from 160 В, display
0 0 2 7 |
I bought this hammer drill with a discount for 1399 UAH during a promotion on the Rozetka website in April 2017. I want to say that I am very picky about tools, and functionality and ergonomics are important to me. The impact is indeed powerful; whether brick or concrete, it drills easily if you don't put pressure on the drill bit itself. Of course, the hammer drill is a bit noisy, but not critically so, it's tolerable. In my hand, it's not very comfortable; the grip feels weak and not well-thought-out. The hammer drill is more comfortable to hold with both hands; there's a second handle for that. I didn't like that there's a slight vibration when it rotates in idle mode. There's an issue with balancing. I hope this won't affect the quality of everything else. I didn't like that the plastic stinks when you open the case, but it's not too bad, it will air out over time. I liked that the kit is complete as stated, along with grease for the drills, which is needed before each drilling. The additional chuck feels cheap, with some play and runout when it rotates. What can I say? Overall, the hammer drill is not bad for its price, except for the drawbacks. Maybe I just got this particular one. It will only be used as needed, not every day. Time will tell how good it is.)) Impact force, price, equipment. A little noisy mechanism during rotation, but not critical. There are worse units. There is a beating in the cartridge, the eccentric in the engine is broken. Smell of plastic. Cheap kit. use Sturm Professional RH2592P less than month |
1 out of 9 user review(s) shown
8 more user review(s)
anonim
22 January 2019, 15:04
Question about Sturm Professional RH2592P Врежиме удар, пикапод нагрузкой стоит, а корпус с нижней частью ствола вращаюся
может ли вращатся пика вручную врежиме удар, или что то не то с механизмом перекл. режимов?
знакомый говорит что пика не должна вращаться даже в ручную, даже при выкл. перфораторе
знакомый говорит что пика не должна вращаться даже в ручную, даже при выкл. перфораторе
We recommendCompare using chart →
hammer drilling, 4000 bpm, without a hit, 1100 rpm, chiselling, 1270 W, 3.5 J, weight 3 kg
hammer drilling, 1200 – 4100 bpm, without a hit, 870 rpm, chiselling, 1500 W, 6 J, weight 5 kg
hammer drilling, 4800 bpm, without a hit, 1300 rpm, chiselling, 1250 W, 3.8 J, quick cartridge change, weight 3 kg
hammer drilling, 4200 bpm, without a hit, 950 rpm, chiselling, 1500 W, 5.5 J, weight 5.44 kg
hammer drilling, 4300 bpm, without a hit, 1100 rpm, chiselling, 1200 W, 3 J, quick cartridge change, weight 3 kg
hammer drilling, 3800 bpm, without a hit, 800 rpm, chiselling, 1550 W, 4.5 J, weight 6 kg
hammer drilling, 3900 bpm, without a hit, 800 rpm, chiselling, 1250 W, 4 J, weight 4.6 kg
hammer drilling, 4500 bpm, without a hit, 880 rpm, chiselling, 1110 W, 3.7 J, weight 6 kg
hammer drilling, 3800 bpm, without a hit, 850 rpm, chiselling, 1600 W, 4 J, weight 4.5 kg
hammer drilling, 4800 bpm, without a hit, 1300 rpm, chiselling, 1250 W, 3.8 J, quick cartridge change, weight 3.2 kg
hammer drilling, 4800 bpm, without a hit, 1300 rpm, chiselling, 1200 W, 3.8 J, quick cartridge change, weight 3.2 kg
hammer drilling, 4800 bpm, without a hit, 1300 rpm, chiselling, 1100 W, 3.8 J, weight 3 kg
